The electromagnetic intereference(EMI) shielding is very essential for commercial and military purposes. We fabricated multi-walled carbon nanoube(MWNT)/epoxy composites and studied the electromagnetic characteristics of the composites before we study the characteristics of MWNT-filled glass fiber-reinforced composites. After setting up the fabrication process, we measured the permittivities of MWNT/epoxy composites with process variables and MWNT concentrations in X-band(8.2GHz- 12.4GHz). Process variables changed the degree of dispersion, which influenced permittivities and permittivities increased rapidly from 0.5wt% to 1.0wt%.
레이다나 전자장비에서 복사되어 나오는 전자기파의 차폐는 상업적으로나 군사적으로 매우 중요한 문제이다. 본 연구에서는 다중벽 탄소나노튜브가 모재에 첨가된 섬유강화 복합재의 전자기적 특성을 고찰하기에 앞서, 다중벽 카본나노튜브와 모재로 이루어진 복합재료를 제작하고 그것에 대한 전자기적 특성을 고찰하였다. 복합재료의 제작 방법을 확립하였고, X-band (8.2GHz~12.4GHz)에서 첨가량과 공정변수에 따른 다중벽 탄소나노튜브/에폭시 복합재료의 유전율을 측정하였다. 또한 MWNT의 재응집 현상을 관찰하였고, 이것이 물성에 미치는 영향을 고찰하였다. 복합재료의 유전율은 MWNT의 분산도에 영향을 받았고, MWNT의 첨가량이 증가함에 따라 거의 선형적인 증가를 보였다.
입자강화복합재료에 관한 연구는 오래 전부터 수행되어왔다. 최근 활발한 연구가 이루어지고 있는 나노복합재료도 역시 입자강화복합재료의 한 종류라 할 수 있다. 본 연구에서는 섬유강화 복합재료의 모재로서 사용되어질 수 있는 다중벽탄소나노튜브/에폭시 복합재료를 제작하고 그 물성을 고찰하였다. 본 연구에서 정립한 제작 공정을 사용하여 제작 된 다중벽 탄소나노튜브/에폭시 복합재료의 인장 물성을 MWNT의 첨가량에 따라 고찰하였다 0.5wt%의 MWNT를 첨가 하였을 때, 인장강성은 19%, 인장강토에서는 12%의 증가를 보였다. 또한 경화시 발생하는 재응집 현상을 관찰하고, 기계적 물성을 더 높이 항상시키기 위해서는 이 현상을 억제해야 함을 확인하였다.
We fabricated MWNT-added glass fabric/epoxy composites. We observed the distribution of MWNTs in the composites using scanning electron microscopy and conformed that most of MWNTs exist in matrix rich region and interface between yams in warp and fill directions. We also investigated the change of permittivities with MWNT concentrations. Only $1wt\%$ MWNTs leads to high permittivity and electromagnetic waves are impossible to be transmitted to more than $3wt\%$ MWNT-added composites, which means the characteristics of these composites are comparable to those of metals or carbon fiber-reinforced composites.
본 논문에서는 다중벽 탄소나노튜브가 첨가된 평직 유리섬유/에폭시 복합재료를 제작하여 전자기적 특성을 고찰하였다. 제작된 복합재료의 미세구조를 관찰하여 재료 내에 MWNT가 유리섬유 얀들의 계면과 모재과잉영역에 주로 분포되어 있음을 관찰하였다. 유전율은 X-band (8.2-12.4 GHz) 주파수 영역에서 측정되었으며, MWNT의 무게비가 증가할수록 증가하며 주파수에 대해서는 거의 일정하게 유지됨을 알 수 있었다 측정된 유전율을 이용하여 두께에 따른 탄소나노튜브가 첨가된 복합재료로 이루어진 전자파 흡수 구조의 반사손실 특성을 살펴보았으며, 제작된 복합재료를 이용하여 10dB 흡수 대역이 X-band전역이며 두께는 3.3mm인 흡수체를 구현할 수 있음을 확인하였다.
본 연구에서는 MWNT(Multi-walled carbon nanotube)의 응집크기와 복소유전율의 관계를 수치해석적인 방법을 통하여 접근하였다. 이를 위하여 3-roll-mill 장비를 사용하여 1 wt% MWNT가 첨가된 에폭시 시편을 제작하였다. 제작된 시편은 X-band(8.2~12.4 GHz)에서 네트워크 분석기와 자유공간 측정 장비를 이용하여 복소유전율을 측정하였다. 측정된 복소유전율과 복소유전율 혼합 모델을 이용하여 에폭시와 MWNT 응집으로 이루어진 해석모델의 유전율을 결정하였다. 해석 모델은 앞서 말한 것과 같이 에폭시와 MWNT의 응집으로 이루어져 있으며, 정육면체 에폭시 내에 구 형태의 MWNT 응집을 가정하였다. 이에 따라 에폭시와 MWNT의 부피비율은 고정되며, 변수는 응집의 크기로 한정하였다. 수치해석은 상용 전자기 해석프로그램인 CST를 사용하였다. CST로부터 모델의 S-parameter를 얻었고, 복소유전율은 Nicolson 방법을 사용하여 얻었다. MATLAB으로 코드를 만들어 S-parameter 로부터 복소유전율을 얻었다. 수치해석 결과 응집의 크기가 작아질수록 복소유전율 값이 높아지는 모습을 살펴볼 수 있었으며, 이는 나노 입자의 이용에 있어서 분산도는 기계적인 특성뿐 아니라 전자기적 특성인 복소유전율에도 영향을 미친다고 볼 수 있으며, 같은 나노 입자 함량에서 분산도가 좋을수록 높은 복소유전율을 기대할 수 있다.
Kim, Myung-Sub;Lee, Sang-Eui;Lee, Won-Jun;Kim, Chun-Gon
Advanced Composite Materials
/
제18권3호
/
pp.209-219
/
2009
Carbon nanotubes (CNTs) have shown great potential for the reinforcement of polymers or fiber-reinforced composites. In this study, mechanical properties of multi-walled carbon nanotube (MWNT)-filled plain-weave glass/epoxy composites intended for use in radar absorbing structures were evaluated with regard to filler loading, microstructure, and fiber volume fraction. The plain-weave composites containing MWNTs exhibited improved matrix-dominant and interlaminar fracture-related properties, that is, compressive and interlaminar shear strength. This is attributed to strengthening of the matrix rich region and the interface between glass yarns by the MWNTs. However, tensile properties were only slightly affected by the addition of MWNTs, as they are fiber-dominant properties.
Shin, Bum Sik;Shin, Jin Wook;Jeun, Joon Pyo;Kim, Hyun Bin;Oh, Seung Hwan;Kang, Phil Hyun
방사선산업학회지
/
제5권2호
/
pp.137-143
/
2011
Epoxy resins are widely used as high performance thermosets in many industrial applications, such as coatings, adhesives and composites. Recently, a lot of research has been carried out in order to improve their mechanical properties and thermal stability in various fields. Carbon nanotubes possess high physical and mechanical properties that are considered to be ideal reinforcing materials in composites. CNT-reinforced epoxy system hold the promise of delivering superior composite materials with their high strength, light weight and multi functional features. Therefore, this study used multi-walled carbon nanotubes (MWNT) and gamma rays to improve the mechanical and thermal properties of epoxy. The diglycidyl ether of bisphenol A (DGEBA) as epoxy resins were cured by gamma ray irradiation with well-dispersed MWNTs as a reinforcing agent and triarylsulfonium hexafluoroantimonate (TASHFA) as an initiator. The flexural modulus was measured by UTM (universal testing machine). At this point, the flexural modulus factor exhibits an upper limit at 0.1 wt% MWNT. The thermal properties had improved by increasing the content of MWNT in the result of TGA (thermogravimetric analysis). However, they were decreased with increasing the radiation dose. The change of glass transition temperature by the radiation dose was characterized by DMA (dynamic mechanical analysis).
최근들어 고성능의 전자 장비들의 구조는 점점 복잡해지고, 이로 인해 발생되는 전자파 간섭(EMI) 및 적합성(EMC) 문제는 상업적으로나 군사적으로 매우 중요한 문제이다. 자동차, 비행기, 디스플레이 산업 등에서 민감한 전자 장비들과 밀집된 시스템들은 전자기파로부터 보호될 필요성이 있다. 다중벽 탄소나노튜브(MWNT)가 첨가된 유리직물 복합재료와 전도성이 우수한 탄소복합재료를 차폐 물질로 제작하고 전기적 특성을 측정하였다. 관심 주파수 영역은 $300MHz{\sim}1GHz$의 영역이다. 전도성 필러가 첨가된 유리직물 복합재료와 이것으로 이루어진 차폐 기구물의 차폐 특성은 3-D 전자기장 해석 툴을 사용하여 예측해 보았다. 탄소복합재료 기구물의 차폐 특성은 전자파 무반향실에서 측정되었다. 설계에 따라 -20 dB 이상의 전자파 차폐 효율을 보이는 기구물을 제작할 수 있음을 확인하였다.
본 연구는 표면처리에 따른 탄소나노튜브의 표면특성변화가 탄소섬유 강화 복합재료의 기계적 물성에 미치는 영향에 대하여 살펴보았다. 표면처리된 탄소나노튜브의 표면특성은 산-염기도 측정, FTIR, 그리고 XPS를 통하여 알아보았다. 복합재료의 기계적 계면특성은 층간전단강도(interlaminar shear strength; ILSS)와 임계응력세기인자(critical stress intensity factor; $K_{IC}$)를 통하여 고찰하였다. 실험결과 산-염기 상호반응에 의한 각각의 표면처리된 탄소나노튜브의 표면특성의 변화를 가져오며, 산처리한 MWNTs/탄소섬유/에폭시 복합재료의 경우 미처리 MWNTs, 염기 처리 MWNTs와 비교하여 우수한 기계적 물성을 보였다. 이는 산성을 가지는 MWNTs와 염기성의 에폭시 수지가 산-염기 및 수소결합에 의한 계면 결합력의 향상 때문이라 판단된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.