• Bulletin of the Korean Chemical Society
• /
• v.27 no.5
• /
• pp.769-772
• /
• 2006

• Journal of Forest and Environmental Science
• /
• v.34 no.2
• /
• pp.153-161
• /
• 2018

Ozone absorbs ultraviolet light which is harmful to life. However, the recent increase of ambient ozone level due to climate change is becoming the cause of stimulating human eyes, affecting respiratory system, and damaging crops. In this paper, a study was conducted at the Taehwa Research Forest (TRF) of Seoul National University with the purpose of analyzing the characteristics of forest air chemistry based on the measurement of BVOCs emitted from forests and investigating the correlation of BVOCs with ozone generation. The results showed that levels of isoprene and MVK (Methyl Vinyl Keton)+MACR (Methacrolein) were high in summer, but level of monoterpene was high in spring. Ozone level was high from the middle of May to the middle of June, which was before the rainy season. Comparison of the correlation between ozone and isoprene during the measurement period at the TRF showing limited NOx showed that the $R^2$ was correlated with a low value of about 0.4. However, when the isoprene was actively produced from 6:00 AM to 6:00 PM, correlation analysis showed that $R^2$ was about 0.9, while monoterpene started to increase in the afternoon, and decreased level of ozone at night. Correlation analysis showed negative correlation. Forests have two characteristics: not only the formation of ozone but also the decomposition of ozone.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.6
• /
• pp.145-154
• /
• 2012

This paper analyzed the characteristics of traffic accidents in all tunnels on nationwide freeways and selected some various independent variables related to accident occurrence in tunnels. The study aims to develop reliable accident forecasting models using the various dependent variables such as the number of accident (no.), no./km, and no./MVK. Finally, reliable multiple linear regression models were proposed in this paper. This study tested the validity verification of developed models through statistics such as $R^2$, F values, multicollinearity, residual analysis. The paper selected the accident forecasting models considering the characteristics of tunnel accidents and two models were finally proposed according to two groups of tunnel length. In the selected models, natural logarithm of ln(no./MVK) is used for the dependent variable and AADT, vertical slope, and tunnel hight are used for the independent variables. The reliability of two models was proved by the comparison analysis between field data and estimating data using RMSE and MAE. These models may be not only effective in evaluating tunnel safety under design and planning phases of tunnel but also useful to reduce traffic accidents in tunnels and to manage the traffic flow of tunnel.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.4
• /
• pp.533-538
• /
• 2004

Canonical sampling method has been presented to generate the initial conditions for reactive flux studies of organic reactions in water. Velocity Verlet version of Nose-Hoover chain dynamics algorithm has been employed to sample the initial conditions according to canonical distribution. The unstable normal mode of a transition state has been introduced to define a dividing plane separating reactant and product regions in reaction processes. This method has been implemented and tested for the case iels-Alder reaction of methyl vinyl ketone (MVK) and cyclopentadiene (CPD) in water, providing a reliable tool for further reactive flux molecular dynamics studies in condensed media.

• Bulletin of the Korean Chemical Society
• /
• v.11 no.4
• /
• pp.307-309
• /
• 1990

The stereoselectivity of the reaction between methyl vinyl ketone dimer, which contains two possible sites of chelation, and zinc borohydride or diisobutylaluminum hydride has been studied in order to illuminate the factors involved in the high levels of asymmetric induction obtained in the bicyclic system. The conditions for the formation of the exo-5,7-dimethyl-6,8-dioxabicyclo[3.2.1]octane are DIBAH reduction of MVK dimer in ether at reflux followed by acidic cyclizatioan, and for the endo isomer are $Zn(BH_4)_2$ reduction with $ZnCl_2$ at $0^{\circ}C.$.

• Journal of Life Science
• /
• v.34 no.3
• /
• pp.179-190
• /
• 2024

Cannabis sativa is a plant widely cultivated worldwide and has been used as a material for food, medicine, building materials and cosmetics. In this study, we assessed the functional effects of C. sativa stem and root extracts using network pharmacology and confirmed their novel functions. The components in stem and root ethanol extracts were identified by gas chromatography-mass spectrometry analysis, and networks between the components and proteins were constructed using the STICHI database. Functional annotation of the proteins was performed using the KEGG pathway. The effects of the extracts were confirmed in lysophosphatidylcholine-induced THP-1 cells using real-time PCR. A total of 21 and 32 components were identified in stem and root extracts, respectively, and 147 and 184 proteins were linked to stem and root components, respectively. KEGG pathway analysis showed that 69 pathways, including the MAPK signaling pathway, were commonly affected by the extracts. Further investigation using pathway networks revealed that terpenoid backbone biosynthesis was likely affected by the extracts, and the expression of the MVK and MVD genes, key proteins in terpenoid backbone biosynthesis, was decreased in LPC-induced THP-1 cells. Therefore, this study determined the diverse function of C. sativa extracts, providing information for predicting and researching the effects of C. sativa.

• Restorative Dentistry and Endodontics
• /
• v.14 no.1
• /
• pp.179-188
• /
• 1989

The purpose of this study was to measure Micro vicker's hardness of 4 kinds of anterior Composite resins (Pyrofil light bond anterior, Lite-fil anterior, Photo clear fil anterior, Silux) and 6 kinds of posterior Composite resin (Pyrofil light bond posterior. Lite-fil posterior, Photo clear fil posterior, Occlusin posterior, Palfique light posterior, P-30, posterior) according to deference of depth and distance of light tip from surface of composite resin. Each composite resin was filled into Teflon tube of 5mm in diameter and 5mm in depth, celluloid matrix was covered and the light in accordance with each composite resin was irradiated in distance of zero millimeter and 1 cm from light tip to surface of composite resin for 30 seconds. Specimens were sectioned longitudinally with cutting device. Microvicker's hardness measurements ware made at the depth of surface, 1mm, 2mm, 3mm, 4mm and 5mm from the surface to deep portion. Vicker's hardness numbers were taken on each depth under 200gm load for 30 seconds with MVK-E. The following results were: 1. The highest hardness value was measured at 1 mm depth. Then the deeper the depth, the lesser the hardness was observed. 2. The hardness value of anterior composite resins is lower than one of posterior composite resins. 3. Hardness number of composite resin irradiated in distance of zero millimeter from surface of composite resin was higher than one of 1 cm from surface of composite resin. 4. The pattern of hardness change at varying depth was similar to all the experimental material with no relation to distance of light from specimen.

• Clean Technology
• /
• v.4 no.2
• /
• pp.54-60
• /
• 1998

Polyphenylvinylketone (PPVK) having a carbonyl group at the side chain was blended with polystyrene (PS) to investigate the effect of vinylketone polymers on the photodegradability of the blend as a function of U.V. irradiation time. Hydrogenated polyphenylvinylketone (PPVK(H)) which is made by hydrogenation of some of the carbonyl groups in PPVK was also blended with PS to check the role of carbonyl carbonyl group in the process of photodegradation. Photodegradability was also investigated for blends of PS with polymethylvinylketone (PMVK) and for copolymers of styrene and methylvinylketone (SMVK) to compare the effect of copolymerization versus blending on photodegradability. PPVK showed higher photodegradability than PPVK(H), which followed that the blends of PS with PPVK gave higher degradability than with PPVK(H). In view of the fact that PPVK(H) is a partially hydrogenated version of PPVK, carbonyl group was confirmed to be involved in the photodegradation mechanism. When polymethylvinylketone (PMVK) was blended with PS, this blend showed a higher degradability than PS/PPVK blend. Therefore the highest photodegradability was achieved when PS was blended with PMVK followed by PPVK and PPVK(H) in order. When SMVK was UV irradiated, it showed the highest photodegradability than any blends mentioned above. Therefore, copolymerization was proved to be the better means of photodegradation than blending.