• Proceedings of the KIPE Conference
• /
• 2011.11a
• /
• pp.163-164
• /
• 2011

본 논문은 스마트그리드용 배터리 에너지 저장장치(Battery Energy Storage System, BESS)와 같은 대용량 전력변환장치의 개발 및 성능검증 시험에 사용된 대용량 시험설비에 대해 기술하였다. 대용량 시험설비는 모의 수 배전 계통 설비, DC Power Supply, 부하설비로 구성되어 있다. 모의 수 배전 설비는 개발 시험규격과 계통 상황을 모의하고, DC Power Supply는 연료전지나 배터리 등의 DC Source, 수동부하장치는 전력 변환 설비의 각종 부하들을 모의하기 위해 설계 제작하여 스마트그리드용 2MVA BESS의 성능검증 시험에 이용하고 있다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.198-201
• /
• 2004

We have developed a multi-domain vertically aligned liquid crystal display (MVA-LCD) that produces natural gray-scale images even at high viewing angles. We divided each pixel into two areas and set different threshold voltages for each sub-area. A transparent electrode in a sub-area is not connected directly to the source electrodes but via the capacitance of the SiN layer. In particular, light-orange skin color appears very natural, even at a high inclination angle. The contrast ratio is over 500 in the normal direction and over 10 from any viewing angle.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.26-29
• /
• 2004

S-PVA is a new technology which enables screen quality advantages over S-IPS and MVA, including high transmittance, >1000:1 contrast ratio, sub-10ms response time, and wide angle of view with no off-axis image inversion and undetectable gamma distortion. This new technology will be described in detail. This paper also addresses the other remaining performance issues facing LCD-TV, including Samsung's plans for addressing these challenges. For example, until recently, inter-gray response time and associated motion blur were significant issues for achieving LCD-TV images quality. Samsung has invented DCC-II technology to achieve sub-10ms response time, and this achievement is described herein. Other technology advancements, including next-generation color performance and ultra-low black performance and improvement of off axis image quality are also discussed in this paper.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1155-1158
• /
• 2004

Various inorganic alignment layers of nematic liquid crystal (NLC) molecules were investigated. Ar ion beam (IB) irradiation was utilized for alignment method and homogenous and homeotropic orientations with tilt angle were obtained on the suitable inorganic thin films. Proper doping materials were added to diamond-like carbon (DLC) films. In the case of homogeneous alignment, nitrogen doping affected the increase of pretilt angle, while the fluorine bonding in the DLC films was induced the tilted homeotropic alignment cause its extreme hydrophobic property. These results showed that ion beam irradiation method could be applied to the various alignment mode of NLC such as IPS, TN and MVA.

• Journal of Veterinary Clinics
• /
• v.25 no.3
• /
• pp.211-214
• /
• 2008

This report describes a case of severe and prolonged dermatophytosis in a hedgehog that was diagnosed by PCR-RFLP, a rapid and usefulness technique for identification of many causative agents and hereditary characters. A 5-month-old female hedgehog was presented with grade 2 facial pruritus, scaling, encrustation and hemorrhage. Cytology of exudates on the face showed a suspected fungal infection. A culture and tape imprint test of the cultured colony showed many hyphae and microcornidia, suspected to belong to the Trichophyton species. In the PCR-RFLP with MvaI and Hinf I, Trichophyton mentagrophytes var. erinacei was finally identified as a causative agent. The patient completely recovered after application of nystatin cream for 17 days.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.926-927
• /
• 2011

In this paper, temperature distribution of 24 MVA distribution cast-resin transformers is analyzed by using CFD. Usually heat generated in transformer causes many problems. To radiate the heat, conduction and convection are done through the duct between winding. Considering natural convection, fluid analysis is applied to the fluid region surrounding the transformer. As a result of the analysis, hot spot temperature point is predicted at the low-voltage winding. Through this paper, heat distribution and cooling characteristics property can be predicted by analyzing transformer heating characteristic required when designing.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1624-1625
• /
• 2011

35년 이상 동안 운전된 2대의 가스터빈 발전기(70 MVA, 13.8 kV) 고정자 권선의 절연상태를 평가하기 위해 정지중 절연진단 시험을 수행하였다. 성극지수, 교류전류, 유전정접 및 부분방전 크기 등을 측정한 결과 모두 양호하여 절연상태가 매우 건전하게 평가되었다. 유전정접이 서서히 증가하는 전압이 부분방전 개시전압과 거의 일치하며, 이 전압은 다시 제1차 전류 급증점 보다는 3 kV정도 낮게 분석되었다. 그리고 발전기 고정자 권선의 부분방전 패턴은 내부방전으로 분석되었다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.10
• /
• pp.809-813
• /
• 2010

Frequency domain measurement of propagation loss for ultra high frequency (UHF) partial discharge in the winding of power transformer using a spectrum analyzer and pulse generator is presented. We compared the performance of the method using a network analyzer with and without a winding. Using a network analyzer simplifies the measurement and offers better dynamic range and frequency range. It also provides precise propagation loss within the winding in frequency domain at UHF range. We applied this method to measure UHF propagation loss of transformer mock-up, modeled 154 kV 20 MVA power in KEPCO substation.

• Proceedings of the KIEE Conference
• /
• 2008.11a
• /
• pp.244-246
• /
• 2008

EMTP-RV is the very powerful program to analyze the dynamic operation of the power system. To use this package in the large complex power system, it is very important to simplify the power system to simple equivalent network. In our study the 100 MVA STATCOM is placed at 345kV "MIGUM" which is the one of the 345kV substations of the Korean Electric Power System that is consist of more than 1000 bus. MIGUM substation is connected with 7 separated transmission lines to main Korean Electric power system. We developed a new method to simplify the network except the substation that we want to analysis. The power system outside the 345kV substation is modeled into the equivalent network. The loop network outside the substation can be modeled to simplified Thevenin equivalent network. The proposed method is applied to IEEE-14 Reliability Test System and the results shows the effectiveness of the method.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.784_785
• /
• 2009

본 논문에서는 2[MVA]급 배전용 몰드변압기의 온도분포를 유한요소해석을 통하여 수행하였다. 몰드변압기의 온도상승한도와 허용최고온도를 전자기적 열원에 대한 분석을 통하여 계산하고 그 계산된 열원을 바탕으로 열적 해석의 열원으로 사용하여 계산하였다. 일반적으로 변압기의 수명은 내부의 전반적인 열적 특성보다는 특정 부위의 온도 분포에 의해 결정되며, 특히 변압기 내부 최고점의 온도(hot spot temperature)값이 허용치 이상으로 상승할 경우 절연내력의 저하로 인해 변압기의 수명은 급격히 감소한다. 이러한 수명개선을 위해 몰드 변압기의 철심과 고압.저압권선의 Joule's loss을 계산하여 열원을 계산하였고, 그 결과를 토대로 배전용 몰드변압기의 철심과 고압 저압권선의 온도상승 분포와 최고점의 온도분포를 예측하였다.