• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.1243-1246
• /
• 1998

Three-dimensional(3-D) sound is a technique for generating or recreating sounds so they are perceived as emanating from locations in a three-dimensional space. Three dimensional sound has the potential of increasing the feeling of realism in music or movie soundtracks. Three-dimensional sound effects depend on psychoacoustic spectral and phase cues being presented in a reproduced signal. In this paper we propose an effective algorithm for the sound image expansion in television system using stereo image enhancement techniques. Compared to the other techniques of three-dimensional sound, the proposed algorithm use only two speakers to enhance the sound image expansion, while maintaining the original sound characteristics.

• Journal of information and communication convergence engineering
• /
• v.16 no.3
• /
• pp.160-165
• /
• 2018

This paper designed and developed the image processing system of integrating feature extraction and matching by using convolutional neural network (CNN), rather than relying on the simple method of processing feature extraction and matching separately in the image processing of conventional image recognition system. To implement it, the proposed system enables CNN to operate and analyze the performance of conventional image processing system. This system extracts the features of an image using CNN and then learns them by the neural network. The proposed system showed 84% accuracy of recognition. The proposed system is a model of recognizing learned images by deep learning. Therefore, it can run in batch and work easily under any platform (including embedded platform) that can read all kinds of files anytime. Also, it does not require the implementing of feature extraction algorithm and matching algorithm therefore it can save time and it is efficient. As a result, it can be widely used as an image recognition program.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.3
• /
• pp.106-111
• /
• 2020

In this paper, we propose the non-contact gesture recognition system and algorithm using proximity-based sensors. The system uses four IR receiving photodiode embedded on a single chip and an IR LED for small area. The goal of this paper is to use the proposed algorithm to solve the problem associated with bringing the four IR receivers close to each other and to implement a gesture sensor capable of recognizing eight directional gestures from a distance of 10cm and above. The proposed system was implemented on a FPGA board using Verilog HDL with Android host board. As a result of the implementation, a 2-D swipe gesture of fingers and palms of 3cm and 15cm width was recognized, and a recognition rate of more than 97% was achieved under various conditions. The proposed system is a low-power and non-contact HMI system that recognizes a simple but accurate motion. It can be used as an auxiliary interface to use simple functions such as calls, music, and games for portable devices using batteries.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.10C
• /
• pp.965-974
• /
• 2007

In this paper, we proposed the feature selection algorithm for multi-class genre classification. In our proposed algorithm, we developed GMM separation score based on Gaussian mixture model for measuring separability between two genres. Additionally, we improved feature subset selection algorithm based on sequential forward selection for multi-class genre classification. Instead of setting criterion as entire genre separability measures, we set criterion as worst genre separability measure for each sequential selection step. In order to assess the performance proposed algorithm, we extracted various features which represent characteristics such as timbre, rhythm, pitch and so on. Then, we investigate classification performance by GMM classifier and k-NN classifier for selected features using conventional algorithm and proposed algorithm. Proposed algorithm showed improved performance in classification accuracy up to 10 percent for classification experiments of low dimension feature vector especially.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.5 no.1
• /
• pp.45-51
• /
• 2012

In this paper, it's a system which recognize the user's emotions after obtaining the biological informations(pulse sensor, blood pressure sensor, blood sugar sensor etc.) about user's bio informations through wireless sensors in accordance of previously collected informations about user's stress index and classification the Colors & Music. This system collects the inputs, saves in the database and finally, classifies emotions according to the stress quotient by using multiple SVM(Support Vector Machine) algorithm. The experiment of multiple SVM algorithm was conducted by using 2,000 data sets. The experiment has approximately 87.7% accuracy.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.3
• /
• pp.119-128
• /
• 2017

In this paper, the wideband direction finding algorithm and system design method for short duration signal such as frequency hopping or burst signal is presented. The polyphase filterbank that it is possible for the near perfect reconstruction was used as a pre-processing and in each subband power measurement was performed to determine whether the presence of a signal and finally general direction finding algorithm was performed. In addition, various experiments was performed using Matlab Simulink and collected data from wideband receiver to verification of the proposed algorithm.

• Structural Engineering and Mechanics
• /
• v.54 no.6
• /
• pp.1097-1109
• /
• 2015

A novel optimization approach for reinforced concrete (RC) biaxially loaded columns is proposed. Since there are several design constraints and influences, a new computation methodology using iterative analyses for several stages is proposed. In the proposed methodology random iterations are combined with music inspired metaheuristic algorithm called harmony search by modifying the classical rules of the employed algorithm for the problem. Differently from previous approaches, a detailed and practical optimum reinforcement design is done in addition to optimization of dimensions. The main objective of the optimization is the total material cost and the optimization is important for RC members since steel and concrete are very different materials in cost and properties. The methodology was applied for 12 cases of flexural moment combinations. Also, the optimum results are found by using 3 different axial forces for all cases. According to the results, the proposed method is effective to find a detailed optimum result with different number of bars and various sizes which can be only found by 2000 trial of an engineer. Thus, the cost economy is provided by using optimum bars with different sizes.

• Journal of Satellite, Information and Communications
• /
• v.9 no.4
• /
• pp.69-72
• /
• 2014

Recently, lighting systems using audio signal of audible frequency and frequency spectrum of visible lighting are studied. And various related products are being sold and released commercially. Also demands of emotional matching algorithm and system which includes effective and methodical designs are being increased. And the importance related with this scheme has increased. In this Paper, we configures a system for digital sound source based LED color control. And we develop algorithm to control LED color for the system configuration. Also we demonstrated the usefulness of the algorithm through experiment with simulation using LED color control system. We expected to be useful in a variety of fields and applications using proposed digital music based LED color control system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.11
• /
• pp.1980-1986
• /
• 2008

A digital watermarking technique used as a protection and certifying mechanism of copyrighted creations including music, still images, and videos in terms of lading any loss in data, reproduction and pursuit. This study suggests using a selected geometric invariant point through the whole processing procedure based on the invariant point so that it will be robust in a geometric transformation attack. The introduced algorithm here is based on a watershed splitting method in order to make medical images strong against RST transformation and other processing. This algorithm also proved that is has robustness against not only RST attack, but also JPEG compression attack and filtering attack.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.4
• /
• pp.113-120
• /
• 2004

In this paper, we propose an efficient feature extraction and image retrieval algorithm for content-based retrieval method. First, we extract the object using Gaussian edge detector for input image which is key frames of MPEG video and extract the object features that are location feature, distributed dimension feature and invariant moments feature. Next, we extract the characteristic color feature using the proposed HAQ(Histogram Analysis md Quantization) algorithm. Finally, we implement an retrieval of four features in sequence with the proposed matching method for query image which is a shot frame except the key frames of MPEG video. The purpose of this paper is to propose the novel content-based image retrieval algerian which retrieves the key frame in the shot boundary of MPEG video belonging to the scene requested by user. The experimental results show an efficient retrieval for 836 sample images in 10 music videos using the proposed algorithm.