• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.3
• /
• pp.705-711
• /
• 2000

A thin film oxide semiconductor micro gas sensor array which shows only 60 mW of power consumption at an operating temperature of $300^{\circ}C$ has been fabricated using microfabrication and micromachining techniques. Excellent thermal insulation of the membrane is achieved by the use of a double-layer structure of $0.1\mum\; thick\; Si_3N_4 \;and\; 1 \mum$ thick phosphosilicate glass (PSG) prepared by low-pressure chemical-vapor deposition (LPCVD) and atmospheric-pressure chemical-vapor deposition (APCVD), respectively. The sensor array consists of such thin film oxide semiconductor sensing materials as 1 wt.% Pd-doped $SnO_2,\; 6 wt.% A1_2O_3-doped\; ZnO,\; WO_3$/ and ZnO. Baseline resistances of the four sensing materials were found to be stable after the aging for three days at $300^{\circ}C$. The thin film oxide semiconductor micro gas sensor array exhibited resistance changes usable for subsequent data processing upon exposure to various gases and the sensitivity strongly depended on the sensing layer materials.

• The Journal of Natural Sciences
• /
• v.1
• /
• pp.21-31
• /
• 1987

A pulse shape of a pulsed TEA $CO_2$ laser in analyzed theoretically by the use of Computer simulation. Since the laser operates $10.6\mum$ P-20 line, regular band, the pulse shape is obtained by adding the hot band R-23 effect to the regular band $10.6\mum$ P-20. The results are well agreed to the experimental results.

• The Korean Journal of Zoology
• /
• v.28 no.4
• /
• pp.211-226
• /
• 1985

The ultrastructure of the digestive organ of Korean Planaria (Dugesia japonica) is studied by light microscope and transmission electron microscope. 1. Pharynx The epithelium surrounding pharyngeal lumen has a number of microvilli on the free surface. The epithelial cells contain PAS-positive granules which are 0.4 to 0.6 $\\mum$ in size. They also contain hundreds of vesicles and vacuoles. The pharyngeal epithelium of the external surface surrounded by pharyngeal cavity possesses a number of cilia and microvilli on the free surface. A number of muscle bundles are found in the pharyngeal tissue. The parietal epithelium surrounding pharyngeal cavity have microvilli and electron-dense secretory granules. 2. Caeca The cells which constitute the cecal epithelium are divided into four kinds of cells. 1) Phagocytic cell : These cells are characterized by presence of a number of lysosomes. These cells have highly developed mitochondria, polyribosomes and granular endoplasmic reticulum of which cisternae are distended. 2) Granular club cell : These cells contain round granules 5 $\\mum$ in diameter which show strong PAS-positivity and weak eosinophilia. The cells have highly developed granular endoplasmic reticulum. 3) Storage cell : These cells include thousands of glycogen granules in the cytoplasm. These cells also have second kind of round granules which are 1.4 to 3 $\\mum$ in size and exhibit PAS-positive reaction. 4) Immature storage cell : These cells have a large nucleus and contain a small number of granules which have PAS-positive granules and a few lipid droplets. Several chromatoid bodies are found in the cytoplasm around the nucleus.

• 연구논문집
• /
• s.29
• /
• pp.131-139
• /
• 1999

The effect of ball milling conditions in the milling of aluminium foil scraps was studied. Initial foil thickness, ball size. content of oleic acid. weight ratio of mineral spirits/foil. charged amount of foil were varied in wet ball milling process. It is impossible to make flake powders by milling of foil scraps with thickness $120 \mum$. As foil thickness decreases from $60\mum$ to $6.5\mum$, Mean size of powder milled for 30 h decreases from 107 µm to 17 µm. Bigger ball is slightly beneficial for milling of foils to the flake powders due to the larger impact energy produced by them. It is impossible to mill the foil without oleic acid to fabricate the flake powder. As content of oleic acid increases from 1.5 % to 5 %, mean size of flake powder milled for 30 h is drastically decreased. For the mineral spirits content below 50 %, foil scrap was not milled because sliding motion of balls by lubricant effect between balls and wall of container. As weight ratio of mineral spirits and foil increase over 100 %, foils were milled powders with mean powder size 15 - 20 때 irrespective of mineral spirits content due to reduced lubricant effect. As charged amount of foil decreases, mean powder size decreases due to increased collision frequency between ball and foil.

• Journal of Magnetics
• /
• v.5 no.3
• /
• pp.90-98
• /
• 2000

The change in the magnetic properties of a spin-valve multilayer with the structure IrMn (9 m)/CoFe (4 nm)/Cu (2.6 nm)/CoFe (2 nm)/NiEe (6 nm) is investigated as a function of the size and the aspect ratio. At a fixed aspect ratio (the length/width ratio) of 2, the magnetostatic interactions begin to affect the magnetic properties substantially at a spin-valve length of 5 $\mum$, and, at a length of 1 $\mum$, they become even more dominant. In the case of a fixed multilayer size (2.4 $\mum$) which is indicated by the sum of the length and the width, magnetization change occurs by continuous spin-reversal and M-H loops are characterized by no or very small hysteresis at aspect ratios smaller than unity, At aspect ratios greater than unity, magnetization change occurs by spin-flip resulting in squared hysteresis loops. A very large changes in the coercivity and the bias field is observed, and these results are explained by two separate contributions to the total magnetostatic interactions: the coercivity by the self-demagnetizing field and the bias field by the interlayer magnetostatic interaction field.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.1
• /
• pp.53-59
• /
• 1999

The ceramic capacitor was fabricated by $(Ba_{0.85}Ca_(0.15)TiO_3+ZnO$ + ZnO(from 0.1 to 0.4 mol ratio). The electrical and structural properties of ceramic capacitor for high voltage application was studied in this study. The relative rensity of ceramics capacitor has shown high in all specimen. The grain was a small size from $1.0[\mum]$ to $1.22[\mum]$ and it was increased with ZnO at 0.3 mol ratio. It was stabilized that the temperature coefficient of ceramic capacitor to change temperature had below 100[ppm] at 0.12~10[kHz]. The dielectric reIaxation time was decreased by interface polarization over $110[^{\circ}C]$ and it was increased by space polarization of paraelectric layer below $110[^{\circ}C]$. The insulating layer was increased with ZnO and dielectric constant to voltage was stabilized by 0.1[%].0.1[%].

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.12
• /
• pp.27-34
• /
• 2004

The study on the RF substrate circuit is necessary to model RF output characteristics of deep submicron MOSFETs below 0.2$\mum$ gate length that have bun commercialized by the recent development of Si submicron process. In this paper, direct extraction methods are developed to apply for a simple substrate resistance model as well as another substrate model with connecting resistance and capacitance in parallel. Using these extraction methods, better agreement with measured Y22-parameter up to 30 GHz is achieved for 0.15$\mum$ CMOS device by using the parallel RC substrate model rather than the simple resistance one, demonstrating the RF accuracy of the parallel model and extraction technique. Using this model, bias and gate length dependent curves of substrate parameters in the RF region are obtained by increasing drain voltage of 0 to 1.2V at deep submicron devices with various gate lengths of 0.11 to 0.5㎛ These new extraction data will greatly contribute to developing a scalable RF nonlinear substrate model.

• Journal of Welding and Joining
• /
• v.15 no.5
• /
• pp.25-35
• /
• 1997

현재, 표면개질에 주로 많이 사용되는 레이저는 세 종류로서, C $O_{2}$$laser(파장길이:10.6.\mum),$ Nd:YAG(neodymium-doped yettrium aluminum garnet) $laser(파장길이:1.06.\mum)$ 및 excimer laser(157~350nm) 등이다. 이 외에도 초기에는 ruby레이저빔이 사용되기도 하였으나, 현재는 많이 사용되고 있지 않다. 레이저 빔에 의한 표면개질에는 몇가지 장점이 있는데, 이러한 장점은 주로 급속가열과 급속냉각 효과에 기인하는 것이다. 즉, 1) 급냉효과에 의한 미세한 결정입자 형성, 2) 불안정상 (metastable phase) 또는 비정질 상 생성, 3) 열역학적 용해도 보다 높은 용해도. 4) 편석이 없는 균질한 미세조직, 5) 극히 낮은 기공도, 6) 좁은 열영향 부위, 7) 표면층과 모재 사이의 높은 결합력 등이다. 이 외에도 공정상의 장.단점들이 Ref.5, 6에 잘 요약 정리되어 있다. 지금까지 국내에서 레이저 표면개질에 대한 조사가 몇몇 있었으나, 본 조사에서는 보통 많이 다루어지지 않은 부분, 즉 충격경화 및 표면제어에 비중을 두었으며, 비용융 부분(I)과 용융부분(II)을 분리하여 정리하였다.

• FLOWER RESEARCH JOURNAL
• /
• v.18 no.1
• /
• pp.73-76
• /
• 2010

A new light pink spray-mum, 'Brown ND' was bred by crossing between 'Noeul', a yellow anemone type flower, and 'Dalma', a pink anemone type flower in October 2003. The growth and flowering characteristics were investigated in forcing, natural, and retarding cultures from 2005 to 2007. The 'Brown ND' was a medium-flowering fall-mum with light pink anemone type flower and had 10.6 flowers per stem, 4.1 cm diameter of flower in natural culture. The number of days to flowering and flowers per plant was 59 and 9.1, respectively, in forcing culture of 'Brown ND' whereas the number of days to flowering was 49 in retarding culture.

• Journal of Korean Society for Atmospheric Environment
• /
• v.8 no.1
• /
• pp.68-73
• /
• 1992

A study on the formation of particulate nitrate$(NO_3^-)$ and gaseous nitrate$(HNO_3)$ in the atmosphere was carried out in Seoul from Oct 8 to 11 1991. To collect $NO_3^-$ and $HNO_3$ in the ambient air, dual filter pack sampler (47mm$\phi$) was used. In the dual filter pack sampler, the first filter was Teflon filter (poresize 1$\mum$) for collection of $NO_3^-$ and the second filter was Nylon filter (poresize 0.45 $\mum$) for $HNO_3$. Particulate nitrate$(NO_3^-)$ and Sulfate ions were analysed by Ion chromatography. $HNO_3$ concentration was higher in the day time $(9.93\mug/m^3)$ than the night time$(3.50\mug/m^3)$, and Particulate nitrate$(NO_3^-)$ concentration was higher in the night time and early morning$(6.21\mug/m^3)$ than the day time$(4.31\mug/m^3)$. The conversion rate of $NO_x$ to total nitrate$(NO_3^-, HNO_3)$ was 7.57%/hr in the day time and 4.79%/hr in the night time, and total average conversion rate was 5.60%/hr.