• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.169-169
• /
• 1999

We studied magnetic properties of co thin films deposited on Pd (111) surface, which attracted much attention recently due to the perpendicular magnetic anisotropy, using magnetic circular dichroism(MCD). Special attention was paid on the effect of Pd capping and interface roughness on the direction of magnetic easy axis, and for that purpose MCD signals for all Co thicknesses were measured with two different ways : in-plane and out-of-plane geometry. In case of bare Co films deposited on smooth Pd(111) surface, no MCD signal was observed under 4$\AA$ co thickness. At 4$\AA$ Co thickness, MCD signal at the out-of-plane geometry was observed, and for thicker Co films, only in-plane MCD signal was measured. This type of magnetic easy axis transition has been reported for other cases like Co/Pt system. The effect of 5$\AA$ Pd capping on these bare Co films made an remarkable change on the transition of magnetic easy axis. Out-of-plane MCD signals exists up to 20$\AA$ Co thickness, and disappears at 24$\AA$ Co thickness. In-plane MCD signals first appears at 10$\AA$ Co thickness and gradually increases up to 24$\AA$ Co thickness. Between 10$\AA$ and 20$\AA$ Co thickness, in-plane and out-of-plane MCD signal coexist. The formation of multi-domain structure or the existence of tilted magnetic easy axis is an possible scenario for such an interesting coexistence. The effect of interface roughness was also tested by measuring MCD signal on Co films deposited on un-annealed Pd(111) surface. Out-of-plane MCD signal was observed up to 8$\AA$ Co thickness and the anisotropy of MCD signal at 4$\AA$ Co thickness was very large with respect to that of Co film deposited on the smooth substrate. Above 8$\AA$ thickness, there exists only in-plane MCD signal. From above results, it was concluded that both Pd capping and interface roughness induce and reenforce the perpendicular magnetic anisotropy. The large perpendicular magnetic anisotropy of Co/Pd multilayer system made by sputtering method can be well understood from our results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.6
• /
• pp.644-653
• /
• 2013

In this paper, a formulation for obliquely incident electromagnetic wave has been presented for an analysis of highpower electromagnetic pulse penetration into multilayered dispersive media. Based on generalized models of measured dielectric constants and propagation channels reflecting the Earth's general features, the propagation phenomenon of the obliquely incident early-time(E1) high altitude electromagnetic pulse(HEMP) is analyzed. In addition, the polarization and critical angle are also considered. It is found that the total reflection occurs at an incident angle of about 38 degrees at the soil-rock interface, and that the parallel-polarized E1 HEMP penetrates better than the perpendicular-polarized one. The peak level of the penetrating electric field is found to be 5.6 kV/m at normal incidence, regardless of the type of polarization, and E1 HEMP is greatly reduced near the critical angle. Moreover, the penetrating E1 HEMP is analyzed as a variation of moisture content and depth of materials, resulting E1 HEMP could be useful in determining the levels of shielding required for buried facilities.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.4
• /
• pp.642-652
• /
• 2014

The synthesis of octenyl succinyl ${\beta}$-gucan (OSA-${\beta}$-glucan) was carried out and its interfacial properties at the oil-water interface and in emulsion systems were investigated. An aqueous ethanol system as a reaction media was used to facilitate the synthesis process; 10% (w/w) ethanol found to be the best as it showed a maximum degree of substitution (DS: 0.0132). FT-IR showed a characteristic absorption spectrum at $1736cm^{-1}$, indicating the esterification of octenyl succinyl groups to ${\beta}$-glucan backbone. As for interfacial tension measurements, it was decreased with increasing concentration of OSA-${\beta}$-glucan in the aqueous phase and when NaCl was added to aqueous OSA-${\beta}$-glucan solution in the range of 0.01 M to 0.1 M and also when pH was raised (pH 3 ~ pH 9). In systems of emulsion stabilized with OSA-${\beta}$-glucan, fat globule size found to decrease with increasing concentration of OSA-${\beta}$-glucan, showing a critical value of about $0.32{\mu}m$ at 0.5 wt%. When the OSA-${\beta}$-glucan emulsions were stored, it was found that fat globule size was increased with storage time and particularly pronounced increase was observed in emulsion with 1% OSA-${\beta}$-glucan, possibly due to depletion flocculation. Results of creaming stability evaluated by light scattering technique showed that it was more stable in emulsions containing smaller fat globule size. Surface load of OSA-${\beta}$-glucan in emulsions increased with increasing concentration of OSA-${\beta}$-glucan, suggesting a multilayer adsorption.

• Journal of Biomedical Engineering Research
• /
• v.23 no.3
• /
• pp.197-205
• /
• 2002

The objectives of this Paper is to implement a diagnostic classifier of differential laryngeal diseases from acoustic signals acquired in a noisy room. For this Purpose, the voice signals of the vowel /a/ were collected from Patients in a soundproof chamber and got mixed with noise. Then, the acoustic Parameters were analyzed, and hierarchical neural networks were applied to the data classification. The classifier had a structure of five-step hierarchical neural networks. The first neural network classified the group into normal and benign or malign laryngeal disease cases. The second network classified the group into normal or benign laryngeal disease cases The following network distinguished polyp. nodule. Palsy from the benign laryngeal cases. Glottic cancer cases were discriminated into T1, T2. T3, T4 by the fourth and fifth networks All the neural networks were based on multilayer perceptron model which classified non-linear Patterns effectively and learned by an error back-propagation algorithm. We chose some acoustic Parameters for classification by investigating the distribution of laryngeal diseases and Pilot classification results of those Parameters derived from MDVP. The classifier was tested by using the chosen parameters to find the optimum ones. Then the networks were improved by including such Pre-Processing steps as linear and z-score transformation. Results showed that 90% of T1, 100% of T2-4 were correctly distinguished. On the other hand. 88.23% of vocal Polyps, 100% of normal cases. vocal nodules. and vocal cord Paralysis were classified from the data collected in a noisy room.

• Korean Journal of Animal Reproduction
• /
• v.18 no.4
• /
• pp.235-244
• /
• 1995

The present study was designed to demonstrate that ES cell lines efficiently could be isolated from explanted blastocysts of hybrid BCF1 mouse when grown on STO feeder layer derived from mouse fibroblasts in culture medium supplemented with leukemia inhibitory factor (LIF). The expanded blastocysts were attached to mitomycin C-inactivated STO feeder layer and were cultured for 4 days. Four days later the ICM was disaggregated by a short term trypsin treatment (0.25% trypsin / 0.04% EDT A for 2-3 min). The resulting cell suspension was seeded on a new STO feeder layer and covered with DMEM supplemented with 10% FCS, 0.1 mM nonessential amino acid, 0.1 mM sodium pyruvate, 0.1 mM mercaptoethanol and 1,000 U/ml LIF. Colonies of ES-like cells were observed after the second passage. These colonies were repeatedly passaged at approximately 5 day intervals. In this study, five ES-like celllines were isolated by directly explanting blastocysts, but three lines were lost after the 5th passage, possibly due to toxic effects of a new FCS batch. The characterization of developmental potential of isolated cell lines was performed with respect to in vitro differentiation and specific activity of alkaline phosphatase (AP). When cells were cultured in suspension, the aggregates of cell lines were capable of forming simple embryoid bodies (EB), and showed the capacity for forming cystic multilayer EBs. In addition, the cell lines were positive for AP staining, a biochemical marker characteristic of mouse ES cells.

• Applied Chemistry for Engineering
• /
• v.18 no.1
• /
• pp.10-16
• /
• 2007

In this study, we examined the preparation and hydrolysis property of immobilized urease membrane to decompose harmful urea in the body and remove ammonia which was produced by its decomposition. Urease immobilized membrane was prepared by introducing anion-exchange group DEA into porous hollow-fiber membrane by radiation graft polymerization method, and immobilization of urease. When urease was immobilized at membrane introduced with anion-exchange group, the more increasing grafting rate, the more increasing immobilization amount. The result originates from the fact that a greater amount of protein was immobilized by forming a multilayer on the longer grafted chain. Meanwhile, the addition of the cross-linker was possible not only to suppress separation phenomenon produced during a washing process of immobilized urease membrane but also to enable the recycling of membrane. Urease Immobilized membrane with no separation phenomenon was prepared by cross-linking reaction for 5 h, and the hydrolysis rate of prepared urease immobilized membrane was over 98% and 50%, respectively, in 1 mol and 4 mol urea solutions.

• Korean Journal of Ecology and Environment
• /
• v.41 no.spc
• /
• pp.11-20
• /
• 2008

In this study, we applied a Particle Swarm Optimization (PSO) algorithm to predict the changes of chlorophyll-${\alpha}$ related to environmental factors in agricultural reservoirs in Korean national scale. Data were obtained from water quality monitoring networks of reservoirs operated by the Ministry of Agriculture and Forestry and the Ministry of Environment of Korea. From the database of the monitoring networks, 290 reservoirs were chosen with variables such as chlorophyll-${\alpha}$ and 13 environmental factors (COD, TN, TP, Altitude, Bank height, etc.) measured in 2002. Based on Carlson's trophic status index, reservoirs were divided into five groups, and most agricultural reservoirs $(TSI_{CHL}\;64.1%,\;TSI_{TP}\;75.5%)$ were in the eutrophic states. The groups were discriminated with environmental variables, showing that COD, DO, and TP were important factors to determine the trophic states. MLP-PSO (Multilayer perceptron (MLP) with PSO for the optimization) was applied for the prediction of chlorophyll-${\alpha}$ with environment factors, and showed high predictability (r=0.83, p<0.001). Additionally, the sensitivity analysis of the MLP-PSO model showed that COD had the strongest positive effects on the concentration of chlorophyll-${\alpha}$, and followed by TP, TN, DO, whereas altitude and bank height had negative effects on the concentration of chlorophyll-${\alpha}$.

• Journal of the Korean Ceramic Society
• /
• v.40 no.10
• /
• pp.961-966
• /
• 2003

A Multi-Layer Ceramic (MLC) chip type Band-Pass Filter (BPF) using BiNb$\_$0.975/Sb$\_$0.025/ $O_4$ LTCC (Low Temperature Co-fired Ceramics) and MLC processing is presented. The MLC chip BPF has the benefits of low cost and small size. The BPF consists of coupled stripline resonators and coupling capacitors. The BPF is designed to have an attenuation pole at below the passband for a receiver band of IMT-2000 handset. The computer-aided design technology is applied for analysis of the BPF frequency characteristics. The attenuation pole depends on the coupling between resonators and the coupling capacitance. An equivalent circuit and structure of MLC chip BPF are proposed. The frequency characteristics of the manufactured BPF is well acceptable for IMT-2000 application.

• Journal of the Korean Magnetics Society
• /
• v.20 no.2
• /
• pp.35-40
• /
• 2010

The GMR-SV (giant magnetoresistance-spin valve) device depending on the micro patterned features according to two easy directions of longitudinal and transversal axes has been studied. The GMR-SV multilayer structure was Ta(5 nm)/NiFe(8 nm)/Cu(2.3 nm)/NiFe(4 nm)/IrMn(8 nm)/Ta(2.5 nm). The applied anisotropy direction of the GMR-SV thin film was performed under the magnitude of 300 Oe using by permanent magnet during the deposition. The size of micro patterned device was a $1\;{\times}\;18\;{\mu}m^2$ after the photo lithography process. In the aspects of the shape magnetic anisotropy effect, there are two conditions of fabrication for GMR-SV device. Firstly, the direction of sensing current was perpendicular to the magnetic easy axis of the pinned NiFe/IrMn bilayer with the transversal direction of device. Secondly, the direction of shape magnetic anisotropy was same to the magnetic easy axis of the free NiFe layer with the longitudinal direction of device.

• Journal of the Korean Magnetics Society
• /
• v.24 no.4
• /
• pp.101-106
• /
• 2014

The glass/Ta(5.8 nm)/NiFe(5 nm)/Cu(2.3 nm)/NiFe(3 nm)/IrMn(12 nm)/Ta(5.8 nm) GMR-SV (giantmagneto-resistance-spin valve) multilayer structure films with a magnetoresistance ratio (MR) of 5.0 % and a magnetic sensitivity (MS) of 1.5%/Oe was deposited by dc magnetron sputtering method. Also, GMR-SV device having a width of $7{\mu}m{\sim}8{\mu}m$ similar to the diameter of RBC (red blood cell) was fabricated by the light lithography process. When RBCs coupled with several magnetic beads with a diameter of $1{\mu}m$ dropped upon the GMR-SV device having MR = 1.06% and MS = 0.3 %/Oe, there is observed the variation of about included of a resistance value of ${\Delta}R=0.4{\Omega}$ and ${\Delta}MR=0.15%$ around a external magnetic field of -0.6 Oe. From these results, the GMR-SV device having the width magnitude of a few micron size can be applied as the biosensor for the analysis of a new magnetic property of hemoglobin inside of RBC combined to magnetic beads.