• Food Engineering Progress
• /
• v.14 no.1
• /
• pp.27-34
• /
• 2010

Multilayer edible coatings was applied to lemon with beeswax-hydroxypropyl methylcellulose (BW-HPMC), soybean oil-carboxymethyl cellulose (SBO-CMC), and carnaubawax-shellac-locust bean gum (CW-SL-LBG), respectively. The multilayer was composed of two layers of the same material, but the outer layer only contained vitamins C and E as antioxidants. Coating amounts built on lemon peel were measured to be large in the order of CW-SLLBG> BW-HPMC> SBO-CMC. The coated lemons were stored at 30${^{\circ}C}$ for 12 days. CW-SL-LBG showed the least change during the storage in weight loss, rotten rate, firmness, and browning. Whereas SBO-CMC had the least change in pH, soluble solid amount, and titratable acidity. In a sensory test, CW-SL-LBG was evaluated to be the best in the attributes such as spoilage, glossiness, color, firmness, and flavor. Overall CW-SL-LBG was judged to be the best for multilayerd coating with vitamin C and E on lemon.

• Journal of the Korean Vacuum Society
• /
• v.19 no.1
• /
• pp.52-57
• /
• 2010

$BiFeO_3/Pb(Zr_{0.52}Ti_{0.48})O_3$(BFO/PZT) multilayer thin films have been prepared on a Pt/Ti/$SiO_2$/Si(100) substrate by chemical solution deposition. BFO single layer, BFO/PZT bilayer and multilayer thin films were studied for comparison. X-ray diffraction analysis showed that the crystal structure of all films was multi-orientated perovskite phase without amorphous and impurity phase. The leakage current density at 500 kV/cm was reduced by approximately four and five orders of magnitude by bilayer and multilayer structure films, compared with BFO single layer film. The low leakage current density leads to saturated P-E hysteresis loops of bilayer and multilayer films. In BFO/PZT multlayer film, saturated remanent polarization of $44.3{\mu}C/cm^2$ was obtained at room temperature at 1 kHz with the coercive field($2E_c$) of 681.4 kV/cm.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2008.11a
• /
• pp.33.2-33.2
• /
• 2008

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.287-288
• /
• 2010

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.4
• /
• pp.543-549
• /
• 1986

A topologically based interconnection routing of multilayer printed circuit boards has been proposed. This study focuses on modeling the relative positioning of the interconnect paths rather than absolute positioning within a fixed coordinate system, thereby avoiding simplifications that impose restrictin on the path shapes.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2004.05a
• /
• pp.38-38
• /
• 2004

• Journal of Energy Engineering
• /
• v.23 no.3
• /
• pp.82-87
• /
• 2014

MLI(Multi-layer Insulation) is widely used to get highly insulating on cryogenic system in order to reduce heat loads. MLI for satellites thermal performance is changed by materials and laminated method. In this study, a composite multilayer insulation by application of heat stroage tank performance were compared with materials and laminated to change the way. Experimental methods of the KS C 9805 was used, the composite multilayer insulation and EPS was compared with the insulation performance. A method for analysis of experimental results is the equivalent thickness about CMI and the insulation performance were used to compare thermal conductance. As a results, the equivalnet thickenss and the thermal conductance of the composite multilayer insulation were smaller than the EPS and the thermal performance are more excellent. In addition, the configuration of the composite multilayer insulation materials and laminated method varies depending on the overall heat transfer coefficient was confirmed.

• Korean Journal of Optics and Photonics
• /
• v.8 no.4
• /
• pp.283-290
• /
• 1997

Scattering measurement on high reflection dielectric multilayer mirrors deposited on quartz substrate in a vacuum chamber were performed using a total integrated scattering method. Scattering of (Ta$_2$$O_5$/SiO$_2$) multilayer mirrors deposited at 250-30$0^{\circ}C$ was 0.048-0.050% and did not change with an annealing at 30$0^{\circ}C$ for 4 hours. On the other hand, scattering of (TiO$_2$/SiO$_2$) multilayer mirror at 25$0^{\circ}C$ was 0.029% and it showed the heavy tensile stress after an annealing. The rms roughness of (Ta$_2$$O_5$/SiO$_2$) multilayer mirror was almost the same as that of (TiO$_2$/SiO$_2$)multilayer mirror. The column size of Ta$_2$$O_5$ film was smaller than that of TiO$_2$film and the packing density of (Ta$_2$$O_5$/SiO$_2$) multilayer mirrors was higher than that of (TiO$_2$/SiO$_2$) multilayer mirror. It seems that the higher packing density and smaller column size of Ta$_2$$O_5$ films lead to more scattering.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.2
• /
• pp.280-289
• /
• 2013

Various vehicles have been studied in order to protect skin ageing and sustain constantly moisturization. Recently, in relation to maintain of moisture, absorption and penetration of active materials, there has been introducing many preparing methods such as liposome, liquid crystal and multilamellar emulsion. We developed multilayer lamellar vesicle using cetearyl alcohol/ceteth-20 phosphate/dicetyl phosphate as analogy of phospholipid according to variation of shear rate and pH. These multilayer lamellar vesicles were confirmed by cross polarizing microscope. As results, morphologies of lamellar vesicle were not uniformed at low shear rate and pH. Also, stabilities for encapsulation of retinol were observed at $42^{\circ}C$ during two months. As a result, quantitative content of retinol decreased at low pH. Multilayer lamellar vesicle decreased 14% of transepidermal water loss compared with O/W emulsion. We compared multilayer lamellar sun cream to O/W sun cream using in vitro SPF test of water resistance and concluded that multilayer lamellar sun cream is similar to O/W sun cream in water resistance.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.2
• /
• pp.291-297
• /
• 2010

This article introduces a facile nanoparticle self-assembly/annealing method for the preparation of nanoisland films. First, nanoparticle-polymer multilayer films are prepared with layer-by-layer assembly. Nanoparticle multilayer films are then annealed at $~500^{\circ}C$ in air to evaporate organic matters from the films. During the annealing process, the nanoparticles on the solid surface undergo nucleation and coalescence, resulting in the formation of nanostructured gold island arrays. By controlling the overall thickness (number of layers) of nanoparticle multilayer films, nanoisland films with various island density and different average sizes are obtained. The surface property of gold nanoisland films is further controlled by the self-assembly of alkanethiols, which results in an increased surface hydrophobicity of the films. The structure and characteristics of these nanoisland film arrays are found to be quite comparable to those of nanoisland films prepared by vacuum evaporation method. However, this self-assembly/annealing protocol is simple and requires only common laboratory supplies and equipment for the entire preparation process.