• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.202-202
• /
• 2012

염료감응태양전지(DSSC)의 광변환 효율을 향상시키기 위하여 진공챔버에서 450도 고온에서 O2, Ar, and N2 혼합가스를 주입하여 다양한 plasma로 TiO2 박막을 처리하면서 소성시켰다. TiO2 표면을 cleaning하고 활성화함으로서 염료의 결합력을 향상시키는 것 외에 TiO2 내부의 oxygen vacancy를 변화를 관찰하였다. 실험에 사용한 박막은 glass 위에 FTO 박막을 입히고, 다공성 TiO2 나노입자 박막을 코팅하여 제조하였다(porous TiO2 나노입자(${\sim}12{\mu}m$)/FTO(Fluorine doped Tin oxide; $1{\mu}m$)/glass). 완성된 광전극에 대해서 XRD, XPS, EIS, FE-SEM 등을 이용하여 분석하였다. 또한 이렇게 전처리된 광전극을 사용한 DSSC를 제작하였다. 그리고 Solar-simulator를 통해 그 효율을 측정하여 '플라즈마환경에서 소성된 광전극에 대한 DSSC의 광변환효율에 미치는 효과'을 고찰하였다.

• Journal of Biosystems Engineering
• /
• v.21 no.4
• /
• pp.467-473
• /
• 1996

Ultrasonic energy was applied for atomizing rice-bran oil which is a highly viscous bio fuel. Six different nozzles, an injection simulator, and an ultrasonic generator system were designed and constructed for the experiment. An immersion liquid method was used for the measurement of injection droplet sizes. The characteristics of injection droplets was investigated with respect to the numbers of the droplets with diameters ranging from 5$\mu$m 50$\mu$m and to the Sauter mean diameter. The results showed that the ultrasonic energy was effective for the improvement of the atomization of the injection droplets for all the factors such as type of nozzles, nozzle opening pressures, and collection distances.

• Journal of electromagnetic engineering and science
• /
• v.18 no.1
• /
• pp.35-40
• /
• 2018

This study presents a vertical-type CMOS Hall device with improved sensitivity to detect a 3D magnetic field in various types of sensors or communication devices. To improve sensitivity, trenches are implanted next to the current input terminal, so that the Hall current becomes maximum. The effect of the dimension and location of trenches on sensitivity is simulated in the COMSOL simulator. A vertical-type Hall device with a width of $16{\mu}m$ and a height of $2{\mu}m$ is optimized for maximum sensitivity. The simulation result shows that it has a 23% better result than a conventional vertical-type CMOS Hall device without a trench.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.283-285
• /
• 2001

In this paper, a new lateral insulated gate bipolar transistor (LIGBT) is proposed to improve the latch-up performance without current path underneath the n+ cathode region. The improvement of latch-up performance is verified using the two-dimensional simulator MEDICI and the simulation results on the latch-up current density are 3.12${\times}$10$\^$-4/ A/$\mu\textrm{m}$ for the proposed LIGBT and 0.94${\times}$10$\^$-4/ A/$\mu\textrm{m}$ for the conventional LIGBT. The proposed SOI LIGBT exhibits 3 times larger latch-up capability than the conventional SOI LIGBT.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.318-321
• /
• 2002

This paper presents a proper condition to achieve high conversion efficiency using PC1D simulator on sri-crystalline Si solar cells. Various efficiency influencing parameters such as rear surface recombination velocity and minority carrier diffusion length in the base region, front surface recombination velocity, junction depth and doping concentration in the Emitter layer, BSF thickness and doping concentration were investigated. Optimized cell parameters were given as rear surface recombination of 1000 cm/s, minority carrier diffusion length in the base region 200 $\mu\textrm{m}$, front surface recombination velocity 100 cm/s, sheet resistivity of emitter layer 100 Ω/$\square$, BSF thickness 5 $\mu\textrm{m}$, doping concentration 5${\times}$10$\^$19/ cm$\^$-3/. Among the investigated variables, we learn that a diffusion length of base layer acts as a key factor to achieve conversion efficiency higher than 19 %.

• Proceedings of the KIEE Conference
• /
• 2001.07a
• /
• pp.101-105
• /
• 2001

본 논문에서는 한전 전력연구원에서 개발한 전력계통 해석용 시뮬레이터(이하 KEPS)를 이용하여 대규모 전력계통을 실시간으로 해석하는 방법 및 그 결과를 제시하고자 한다. KEPS는 캐나다 RTI사에서 개발한 RTDS(Real-Time Digital Simulator)를 근간으로 하는 대규모 디지털 실시간 시뮬레이터로써 총 26랙으로 구성되어 있으며 대규모 전력계통을 $50{\mu}sec{\sim}70{\mu}sec$의 타임스텝으로 계산할 수 있는 전력계통 전자기 과도현상 모의해석 장치이다. 본 논문에서는 KEPS를 이용하여 한전의 2000년 계통을 실시간으로 해석하고, 전력계통 안정화장치 (PSS), 계전기등 외부기기를 실시간으로 해석, 검증한 결과를 소개하기로 한다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.3
• /
• pp.193-197
• /
• 2009

In this paper, we study on design of vehicle control system which is based on ${\mu}C/OS-II$, We component a electric motor drive system for simulator because the most of vehicle part use electric motor for actuator. We use the XC2287 microcontroller which is often used vehicle body controller because XC2287 guarantee high confidence and durability in vehicle industry. The electric motor control system derive PWM from general I/O port in XC2287 microcontroller. The signal is supplied at electric motor after amplifying that using driver circuit. The user control duty of PWM signal through controlling potentiometer which is connected to XC2287. through that, the user control speed of electric motor. we synchronize both input process via controlling potentiometer and PWM output process using semaphore. we verify porting of ${\mu}C/OS-II$ via experimentation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.1
• /
• pp.46-56
• /
• 1991

In this paper, 16word X 8bit Content Addressable and Reentrant Memory(CARM) is described. This device has 4 operation modes(read, write, match, reentrant). The read and write operation of CARM is like that of static RAM, CARM has the reentrant mode operation where the on chip garbage collection is accomplished conditionally. Thus function can be used for high speed matching unit of dynamic data flow computer. And CARM also can encode matching address sequentially according to therir priority. CARM consists of 8 blocks(CAM cell, Sequential Address Encoder(S.A.E). Reentrant operation. Read/Write control circuit, Data/Mask Register, Sense Amplifier, Encoder. Decoder). Designed DARM can be used in data flow computer, pattern, inspection, table look-up, image processing. The simulation is performed using the QUICKSIM logic simulator and Pspice circuit simulator. Having hierarchical structure, the layout was done using the 3{\;}\mu\textrm{m} n well CMOS technology of the ETRI design rule.

• Journal of Pharmaceutical Investigation
• /
• v.19 no.2
• /
• pp.93-98
• /
• 1989

The study was performed to compare the dissolution, diffusion and absorption characteristics using Sartorius dissolution and absorption simulator and in vivo bioavailability of commercially available rifampicin capsules. Both brands C and F showed similar dissolution patterns and absorption properties through artificial gastric barrier in Sartorius simulator. Diffusion rate constants through the membrane of brands C and F were $3.04\;{\times}40^{-3}$ and $2.88\;{\times}\;10^{-3}cm/min$, respectively. Rifampicin capsules were administered orally to six fasted healthy volunteers according to cross-over design. The pharmacokinetic parameters between brands C and F, maximum plasma drug concentration$(C_{max})$, the time to reach $C_{max}$, absorption rate constant and area under the curve $(AUC_{0-24hr})$, elimination rate constant, and amount of drug excreted in urine were 6.11 and $7.27\;{\mu}g/ml$, 2.71 and 1.52 hr, 0.6371 and $1.6456 hr^{-1}$, 57.84 and $57.28\;{\mu}g\;{\cdot}\;hr/ml$, 0.1891 and $0.1734 hr^{-l}$, 119.98 and 119.93 mg, respectively. On the basis of experimental results, it was concluded that the bioavailability of brand C rifampicin capsules was almost the same as that of brand F rifampicin capsules.

• Korean Journal of Optics and Photonics
• /
• v.22 no.4
• /
• pp.191-197
• /
• 2011

In this paper, we have designed an integrated triplexer which is the basic component for a FTTH(Fiber To The Home) system which can transmit CATV and voice/data at the same time in a single fiber. The integrated triplexer can be fabricated with a novel technique of "Micro-Block Stacking (MBS)" method which automatically aligns the optical components in the optical beam pass using accurate ceramic holders. We analyze the displacement of the optical focus according to the tolerances of the component dimensions and the assembly process using code V simulator. For the transmitter, the most serious shift of the focal points is caused by the displacements of the LD spot. So the focal point moves up to $72{\mu}m$ from the center point for ${\pm}25{\mu}m$, ${\pm}25{\mu}m$, ${\pm}30{\mu}m$ displacements. For the receiver the most serious shift of the focal points is caused by the displacements of a 0.8mm ball lens (for the analog receiving part) and a micro ball lens (for the digital receiving part), and the focal point moves up to $55{\mu}$ for ${\pm}55{\mu}m$, ${\pm}5{\mu}m$, ${\pm}55{\mu}m$ micro ball lens displacements.