• Journal of Navigation and Port Research
• /
• v.34 no.10
• /
• pp.799-805
• /
• 2010

Since 2000's, Korea has became the world-leading shipbuilding country with the competitive technologies in design and production. And with the China's economic growth, the three economies (Korea, Japan and China) handle 30 percent of the world`s freight cargoes. Shipping industry of Korea has been also grown up to the top 10 of the world with the newly constructed large ports. In spite of the growing demand for ship repair in Korea, its competitiveness analysis has been insufficient. This paper present the competitiveness analysis of ship repair industry of Korea with the consideration of condition of location, repair cost and technological competitiveness.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.245-249
• /
• 2010

In the stereo vision system, information about an object could be gained by searching through images. Edges which are based on the information about an object are used to find the position of the object and send a message of its position coordinate to a unmanned crain. This thesis proposes an algorithm to find the center point of the object's surface which is connected to the unmanned crain's arm, and to recognize the shape of the object by using two CCD cameras. At first, getting information about the edges, and distinguishing each edge's characteristics depend on user's option, and then find the location information by a set of positions that are proposed. This thesis is expected to be devoted to the development of an automation system of unmanned moving equipment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.8
• /
• pp.1767-1775
• /
• 2010

As factory automation is getting popular, there has been a lot of research concerned with stereo vision systems as a part of an automation system with unmanned moving equipment. In the stereo vision system, information about an object could be gained by searching through images. Edges which are based on the information about an object are used to find the position of the object and send a message of its position coordinate to a unmanned crain. This thesis proposes an algorithm to find the center point of the object's surface which is connected to the unmanned crain's hookblock, and to recognize the shape of the object by using two CCD cameras. At first, getting information about the edges, and distinguishing each edge's characteristics depend on user's option, and then find the location information by a set of positions that are proposed. This thesis is expected to be devoted to the development of an automation system of unmanned moving equipment.

• Korean Chemical Engineering Research
• /
• v.57 no.1
• /
• pp.105-110
• /
• 2019

Effect of height on the size and shape of carbon nanotube (CNT) aggregates in the freeboard region of a bubbling fluidized bed ($0.15m\;i.d.{\times}2.6m\;high$) has been determined. Feret diameter and Heywood diameter of the CNT aggregates in the freeboard region of fluidized bed increased with increasing gas velocity. The average aggregate diameters and CNT particle number in the aggregates decreased with increasing of height in the freeboard. Aspect ratio increased as the location was closer to the surface of the dense phase, but decreased at the highest location. Solidity did not show any significant changes with height. The results showed the aggregates formation process is affected by the height in the freeboard. A correlation was proposed to predict the Heywood diameter of the CNT aggregates.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.2
• /
• pp.88-99
• /
• 2019

This study presents the results of analysis for the wave data that were consecutively collected from February 2013 to November 2018 at the location of 1.6 km offshore from Namhangjin beach. The water depth at the location is 30.5 m and waves were measured by AWAC (Acoustic Wave And Current meter). By using wave-by-wave analysis and spectral analysis, wave heights and periods were evaluated and then the relationships between the quantities obtained by the two methods were proposed based on linear regression analysis. In addition, monthly and yearly variations of the significant wave height and period, and the peak wave direction were analyzed. Moreover, the relationship between the significant wave height and period was newly suggested. Variability and probability distribution of the significant wave period with respect to the significant wave height were also examined.

• Annals of Clinical Neurophysiology
• /
• v.6 no.1
• /
• pp.31-34
• /
• 2004

Backgrounds: The pathway of the sural nerve (SN) is variable, but usually divided into medial and lateral sural branches joining the posterior tibial nerve (PTN) and the peroneal nerve (PN). The sural nerve may be affected by PN palsy. The frequency or the severity of SN involvement in peroneal palsy is not known. The purpose of the study is to investigate the frequency and the severity of the SN involvement by the peroneal nerve palsy. Methods: Total 85 patients were included with peroneal palsy. Amplitudes of distal peroneal, sural, and superficial peroneal nerves (SPN) were compared between normal and paralyzed sides. The frequency and severity of SN involvement by peroneal palsy were investigated. Results: Mean age was $48.4{\pm}17.4$ years old at the time of the test. Peroneal palsy was right side in 32, left in 38, and bilateral in 15 patients. Mean amplitudes of affected distal PN, SPN, and SN were $1.51{\pm}1.64mV$, $3.50{\pm}4.86{\mu}V$, and $10.42{\pm}6.59{\mu}V$ in right side, and $1.19{\pm}1.57mV$, $4.38{\pm}5.67{\mu}V$, and $11.06{\pm}6.87{\mu}V$ in left side, respectively. Sensory nerve action potential (SNAP) amplitude of the SN in the affected side was average $73.7{\pm}33.1%$ of normal, which was significantly lower than that in the normal side(p<0.01). The decrease of the sural SNAP amplitude was more than 15% in 39 out of 70 patients with unilateral peroneal palsy. Peroneal compound muscle action potential (CMAP) amplitude was not correlated with the amplitude of the sural SNAP. By complete peroneal palsy, SN SNAP amplitude was decreased to 4% of SNAP and $57.7{\pm}31.8%$ of that in normal side. Conclusions: PN injury without PTN involvement may induce reduction of sural SNAP amplitude. Because of the anatomic variation of SN, the electrophysiological findings are variable. It should be considered to interpret the location of the PN lesion.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.5 no.4
• /
• pp.363-373
• /
• 2000

To understand and investigate chemical characteristics of thermal environment in the southwestern Paciflc, we have measured hydrological and chemical parameters such as temperature, salinity, transparency, pH, nutrients and hydrogen sulfide (H$_2$S). Samples were collected with CTD-casting at 12 station, in Manus Basin including PACMANUS, DESMOS and Susu Knolls, Hydrothermal systems consist of circulation zones where seawater interacts with rock, thereby changing chemical and physical characteristics of both the seawater and the rock. The altered seawater, called hydrothermal fluid, is injected back into the ocean from the hydrothermal vent fields and forms hydrothermal plumes. Consequently, we detected hydrothermal plume with transparency and sulfide anomalies at PACMANUS and Susu Knolls. Sulfide, as geochemical tracer of hydrothermal plume, ranged 0-3.31 ${\mu}$M, and averaged 0.63 ${\mu}$M in the study area. The height, flux and activity of the plume are affected by circulations in the deep water and the spread of plume follows along the isopycnal surface. Therefore the observed H$_2$S anomaly can provide important clue for the source location and it appears that the targestsource in the PACMANUS is aligned in the north-south direction.

• Journal of the Microelectronics and Packaging Society
• /
• v.21 no.3
• /
• pp.43-50
• /
• 2014

By the trends of electronic package to be smaller, thinner and more integrative, the reliability of interconnection between Si chip and printed circuit board is required. This paper reports on a study of high speed shear energy of Sn-4.0wt%Ag-0.5wt%Cu (SAC405) solder joints with different the thicknesses of electroless Ni-P deposit. A high speed shear testing of solder joints was conducted to find a relationship between the thickness of Ni-P deposit and the brittle fracture in electroless Ni-P deposit/SAC405 solder. A focused ion beam (FIB) was used to polish the cross sections to reveal details of the microstructure of the fractured pad surface with and without $HNO_3$ vapor treatment. The high speed shear energy of SAC405 solder joint with $1{\mu}m$ Ni-P deposit was found to be lower without $HNO_3$ vapor, compared to those of over $3{\mu}m$ Ni-P deposit. This could be due to the edge of solder resist in $1{\mu}m$ Ni-P deposit, which provides a fracture location for the weakened shear energy of solder joints and brittle fracture in high speed shear test. With $HNO_3$ vapor, the brittle fracture mode in high speed shear test decreased with increasing the thickness of Ni-P deposit. Then the roughness (Ra) of Ni-P deposits decreased with increasing its thickness. Thus, this gives the evidence that the decrease in roughness of Ni-P deposit for Eelectroless Ni/ Electroless Pd/ Immersion Au (ENEPIG) surface play a critical role for improving the robustness of SAC405 solder joint.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.4
• /
• pp.599-605
• /
• 2016

In this study, two experiments were conducted to investigate the physicochemical characteristics (Exp. I) of bedding materials such as rice hulls (RH), sawdust (SD), wood shavings (WS) and sawdust+wood shavings (S+W; 1:1 in volume), and utilization of these beddings except RH (Exp. II) for rearing beef cattle. In Exp. I, the distribution of particle size (%) with $250{\mu}m$ and below $250{\mu}m$ was greater (p<0.05) in SD (30.4) than RH (4.4), WS (18.8) and S+W (20.1). Bulk density ($kg/m^3$) of bedding materials was directly proportional to the percentage of $250{\mu}m$ and below $250{\mu}m$ particles, 178, 46, 112, and 88 for SD, WD, S+W and RH, respectively. Water absorption rate (%) after submersion in water for 24 h was higher (p<0.05) in WS (540.2) compared to SD (270.2), S+W (368.2). The S+W had an intermediate value of the absorption rate between SD and WS, but had an outstanding durability of water absorption capacity. Moisture evaporation rate (%) for 12 h was higher (p<0.05) in WS (75.4) than SD (70.5), S+W (72.2) and RH (57.8). Average ammonia emission ($mg/m^2/h$) for 36 h was higher (p<0.05) in RH (3.15) than SD (1.70), WS (1.63), and S+W (1.73). In Exp. II, thirty six Hanwoo cows were allocated in 9 pens with one side on feed bunk side (Side A) and another side equipped with water supply (Side B) for 3 weeks with duplicated periods. Average moisture concentrations (%) of beddings were higher (p<0.05) in WS (side A, 65.7; side B, 57.9) than SD (side A, 62.5; side B, 52.2) and S+W (side A, 61.6; side B, 50.7). Regardless of types of beddings, moisture concentrations (%) of beddings within a pen were lower (p<0.05) at side B than A, implying longer period of utilization. These results suggest that using S+W would be a better choice than SD or WS alone, considering physicochemical characteristics and economics, and RH is not a suitable material as a bedding for beef cattle.

• Korean Journal of Ecology and Environment
• /
• v.42 no.2
• /
• pp.172-182
• /
• 2009

This study was to analyze characteristics based on tolerance and trophic guilds and to determine the level of total mercury in tissues of sentinel species, Zacco platypus at 3 sampling sites of the Mangyeong River in 2007. Total sampled fishes were 26 species and the most dominant species was Zacco temminckii (47%). Fish community analysis was resulted that eveness index and diversity index showed low value at S1. However, diversity index and richness index at other sites showed high. According to various guilds analysis, relative abundance of sensitive species was 70% and 42% at S1 and S2, respectively. While sensitive species were decreased (1%) and tolerant species were increased (60%) at S3. It was mainly carried to the impacts of wastewater treatment plants near the location. Relative abundance of insectivore species was decreased from up (S1) to midstream area (S3). In addition, chemical water quality, based on analyses of BOD, COD, TP, TN, EC, MPN and SS concentration showed similar trends. Qualitative Habitat Evaluation Index (QHEI) was averaged 164, judged as "good" habitat condition. Average concentrations of total [Hg] was 146.9 ${\mu}g$ $kg^{-1}$. In the muscles of total [Hg] was the highest, and then followed by kidney, vertebrae, liver, and gills. According to FDA standards (500 ${\mu}g$ $kg^{-1}$) of Korea, total [Hg] has not affected to the individual fish health.