• Journal of IKEEE
• /
• v.28 no.1
• /
• pp.78-89
• /
• 2024

PMIC chips based on a BCD process used in automotive semiconductors require multi-time programmable (MTP) intellectual property (IP) that does not require additional masks to trim analog circuits. In this paper, MTP cell size was reduced by about 18.4% by using MTP cells using PMOS capacitors (PCAPs) instead of NMOS capacitors (NCAPs) in MTP cells, which are single poly EEPROM cells with two transistors and one MOS capacitor for small-area MTP IP design. In addition, from the perspective of MTP IP circuit design, the two-stage voltage shifter circuit is applied to the CG drive circuit and TG drive circuit of MTP IP design, and in order to reduce the area of the DC-DC converter circuit, the VPP (=7.75V), VNN (=-7.75V) and VNNL (=-2.5V) charge pump circuits using the charge pumping method are placed separately for each charge pump.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.1
• /
• pp.120-131
• /
• 2016

In this paper, a 512b MTP memory IP is designed by using MTP memory cells which are written by the FN (Fowler-Nordheim) tunneling method with only MV (medium voltage) devices of 5V which uses the back-gate bias, that is VNN (negative voltage). The used MTP cell consists of a CG (control gate) capacitor, a TG (tunnel gate) transistor, and a select transistor. To reduce the size of the MTP memory cell, just two PWs (P-wells) are used: one for the TG and the select transistors; and the other for the CG capacitor. In addition, just one DNW (deep N-well) is used for the entire 512b memory cell array. VPP and VNN generators supplying pumping voltages of ${\pm}8V$ which are insensitive to PVT variations since VPP and VNN level detectors are designed by a regulated voltage, V1V (=1V), provided by a BGR voltage generator.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.4
• /
• pp.419-427
• /
• 2016

In this paper, a 64b small-area MTP memory IP is designed. A VPPL (=VPP/3) regulator and a VNN (=VNN/3) charge pump are removed since the inhibit voltages of an MTP memory cell are all 0V instead of the conventional voltages of VPP/3 and VNN/3. Also, a VPP charge pump is removed since the VPP program voltage is supplied from an external pad. Furthermore, a VNN charge pump is designed to provide its voltage of -VPP as a one-stage negative charge pump using the VPP voltage. The layout size of the designed 64b MTP memory IP with MagnaChip's $0.18{\mu}m$ BCD process is $377.585{\mu}m{\times}328.265{\mu}m$ (=0.124mm2). Its DC-DC converter related layout size is 76.4 percent smaller than its conventional counterpart.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.1
• /
• pp.48-57
• /
• 2020

MCU used in applications such as wireless chargers and USB type-C require MTP memory with a small cell size and a small additional process mask. Conventional double poly EEPROM cells are small in size, but additional processing masks of about 3 to 5 sheets are required, and FN tunneling type single poly EEPROM cells have a large cell size. In this paper, a 110nm MTP cell using a vertical PIP capacitor is proposed. The erase operation of the proposed MTP cell uses FN tunneling between FG and EG, and the program operation uses CHEI injection method, which reduces the MTP cell size to 1.09㎛2 by sharing the PW of the MTP cell array. Meanwhile, MTP memory IP required for applications such as USB type-C needs to operate over a wide voltage range of 2.5V to 5.5V. However, the pumping current of the VPP charge pump is the lowest when the VCC voltage is the minimum 2.5V, while the ripple voltage is large when the VCC voltage is 5.5V. Therefore, in this paper, the VPP ripple voltage is reduced to within 0.19V through SPICE simulation because the pumping current is suppressed to 474.6㎂ even when VCC is increased by controlling the number of charge pumps turned on by using the VCC detector circuit.

• Journal of the Korea Computer Industry Society
• /
• v.4 no.10
• /
• pp.741-750
• /
• 2003

$MTP^{TM}$ guarantees high bandwidth that is necessary to tansmit high qualify full motion video data effectively. In other hand TCP/IP which is used for information search does not guarentee high bandwidth as that in $MTP^{TM}$. Therefore VOD service system that searches information manged by DBMS and transmits required full motion video data should control different kinds of protocol simultaneously. This paper describes the configuration of VODB system that has solved these problems.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.161-169
• /
• 2020

In order to reduce the manufacturing cost of MCU chips used in applications such as wireless chargers and USB-C, compared to DP-EEPROM (Double Poly EEPROM), which requires 3 to 5 additional process masks, it is even more necessary MTP(Multi-Time Programmable), which is less than one additional mask and have smaller unit cell size. In addition, in order to improve endurance characteristics and data retention characteristics of the MTP memory cell due to E/P(Erase / Program) cycling, the distribution of the V_TP(Program Threshold Voltage) and the V_TE(Erase Threshold Voltage) needs to be narrow. In this paper, we proposed a current-type BL S/A(Bit-Line Sense Amplifier) circuit, WM(Write Mask) circuit, BLD(BL Driver) circuit and a algorithm, which can reduce the distribution of program and V_T and erase V_T, through compare the target current by performing the erase and program pulse of the short pulse several times, and if the current specification is satisfied, the program or erase operation is no longer performed. It was confirmed that the 256Kb MTP memory fabricated in the Magnachip semiconductor 0.13㎛ process operates well on the wafer in accordance with the operation mode.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.832-836
• /
• 2015

In this paper, a DC-DC converter is designed for logic process MTP (multi-time programmable) memory IPs using dual program voltage, which are used for analog trimming or storing chip IDs in sensor applications. The DC-DC converter supplies VPP (=5.25V), VNN (=-5.25V), and VNNL ($=2{\cdot}VNN/5$). It uses MOS capacitors and designed with only 3,3V devices. VPP and VNN are configured in two and five stages, respectively. And their pumping currents are $9.17{\mu}A$ and $9.7{\mu}A$, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.6
• /
• pp.1343-1355
• /
• 1997

Full motion video data is the most effective data type that transmits information in multimedia enviornment. VOD service is system that uses network to transmit full motion video data interactively. Therefore VOD service system must satisfy the following requirements. First, it should transmit high quality full motion video. Second, it should be able to control a large quantity of full motion video. Third, a user should be able to retrieve the full motion vide effectively. However the existing VOD service system is established based n file system that not only does it have disadvantages in managment such as transaction control but also it is not suitable for distributed multimedia environment. The goal of this research is to build a VOD service system that provides high-quality full motion video assuming information retrieval. In order to mainly search video data's bibliographical information and to manage related information, VOD service system and DBMS system are to be closely related. Also, to transmit high quality full motion video data, we use MTP$^{TM}$(Media Transfer Protocol) developed by StarLight. MTP$^{TM}$ guarantees high bandwidth that is necessary to tansmit high quality full motion video data effectively. In other hand TCP/IP which is used for information search does not guarentee high bandwidth as that in MTP$^{TM}$. Therfore VOD service system that seraches information managed by DBMS and transmits requried full motion video data should control different kinds of protocol simultaneously. This paper describes the configuration of VODB system that has solved these problems, implementation and efficiency of data applied system.stem.

• Journal of Korean Foot and Ankle Society
• /
• v.18 no.1
• /
• pp.19-23
• /
• 2014

Purpose: The purpose of this study is to evaluate the clinical and radiographic results of symptomatic bunionette treated with a diaphyseal oblique osteotomy. Materials and Methods: We retrospectively reviewed 12 feet of nine patients diagnosed as symptomatic bunionette and treated with diaphyseal oblique osteotomy. All patients were female and the average age at the time of surgery was 48 years. We checked the foot standing anteroposterior, oblique, and lateral images pre- and post-operatively. We measured the fourth intermetatarsal angle and fifth metatarsophalangeal angle and evaluated the clinical results using the American Orthopaedic Foot and Ankle Society (AOFAS) lesser metatarsophalangeal-interphalangeal (MTP-IP) scale preoperatively and six months postoperatively. Results: Of the nine patients, hallux valgus was combined with symptomatic bunionette in seven feet of five patients. In all of our cases, the average AOFAS lesser MTP-IP scale showed improvement after surgery. Painful callosity around the fifth metatarsophalangeal joint disappeared after surgery in all of our cases. The fourth intermetatarsal angle improved from $12.7^{\circ}$ to $3.1^{\circ}$ and the fifth metatarsophalangeal angle improved from $16.6^{\circ}$ to $2.3^{\circ}$. Conclusion: Diaphyseal oblique osteotomy of the fifth metatarsal appears to be a safe and satisfactory surgical procedure for treatment of symptomatic bunionette.

• Journal of Korean Foot and Ankle Society
• /
• v.24 no.3
• /
• pp.107-112
• /
• 2020

Purpose: Hallux valgus (HV) is a common foot deformity that causes pain in the first metatarsophalangeal joint. Distal metatarsal osteotomies are commonly performed as a treatment. This retrospective study compared the clinical and radiological results of bioabsorbable magnesium (Mg) versus titanium (Ti) screw fixation for modified distal chevron osteotomy in HV. Materials and Methods: Forty-nine patients, who underwent modified distal chevron osteotomy for HV in 2018 and 2019, were reviewed retrospectively. Bioabsorbable Mg screw fixation was applied in 20 patients (22 feet), and a traditional Ti compression screw was applied in 29 patients (40 feet). The patients were followed up for at least six months. The clinical results were evaluated using the American Orthopaedic Foot and Ankle Society hallux metatarsophalangeal-interphalangeal (AOFAS-MTP-IP) scale and a visual analogue scale (VAS). The hallux valgus angle (HVA), intermetatarsal angle (IMA), and distal metatarsal articular angle (DMAA) were measured before, after surgery, and at the six months follow-up. Results: The AOFAS-MTP-IP scale and VAS points were improved in both groups, with no significant difference between them. At the six-month follow-up, HVA, IMA, and DMAA were similar. Bone union was confirmed in both groups, and there were no significant major complications in both groups. Four people in the Ti screw group underwent implant removal surgery. Conclusion: Bioabsorbable Mg screws showed comparable clinical, radiologic results to Ti standard screws six months after distal modified chevron osteotomy. These screws are an alternative fixation material that can be used safely and avoid the need for implant removal operations.