• Journal of Korean Foot and Ankle Society
• /
• v.24 no.3
• /
• pp.107-112
• /
• 2020

Purpose: Hallux valgus (HV) is a common foot deformity that causes pain in the first metatarsophalangeal joint. Distal metatarsal osteotomies are commonly performed as a treatment. This retrospective study compared the clinical and radiological results of bioabsorbable magnesium (Mg) versus titanium (Ti) screw fixation for modified distal chevron osteotomy in HV. Materials and Methods: Forty-nine patients, who underwent modified distal chevron osteotomy for HV in 2018 and 2019, were reviewed retrospectively. Bioabsorbable Mg screw fixation was applied in 20 patients (22 feet), and a traditional Ti compression screw was applied in 29 patients (40 feet). The patients were followed up for at least six months. The clinical results were evaluated using the American Orthopaedic Foot and Ankle Society hallux metatarsophalangeal-interphalangeal (AOFAS-MTP-IP) scale and a visual analogue scale (VAS). The hallux valgus angle (HVA), intermetatarsal angle (IMA), and distal metatarsal articular angle (DMAA) were measured before, after surgery, and at the six months follow-up. Results: The AOFAS-MTP-IP scale and VAS points were improved in both groups, with no significant difference between them. At the six-month follow-up, HVA, IMA, and DMAA were similar. Bone union was confirmed in both groups, and there were no significant major complications in both groups. Four people in the Ti screw group underwent implant removal surgery. Conclusion: Bioabsorbable Mg screws showed comparable clinical, radiologic results to Ti standard screws six months after distal modified chevron osteotomy. These screws are an alternative fixation material that can be used safely and avoid the need for implant removal operations.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.375-378
• /
• 2013

A reference voltage generator which is insensitive to PVT (process-voltage-temperature) variation necessary for NVM memory IPs such as EEPROM and MTP memories is designed in this paper. The designed BGR (bandgap reference voltage) circuit based on MagnaChip's $0.18{\mu}m$ EEPROM process uses a low-voltage bandgap reference voltage generator of cascode current-mirror type with a wide swing and shows a reference voltage characteristic insensitive to PVT variation. The minimum operating voltage is 1.43V and the VREF sensitivity against VDD variation is 0.064mV/V. Also, the VREF sensitivity against temperature variation is $20.5ppm/^{\circ}C$. The VREF voltage has a mean of 1.181V and its three sigma ($3{\sigma}$) value is 71.7mV.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.400-403
• /
• 2018

The VR / AR market has grown significantly due to the development of Virtual Reality and Augmented Reality, the core technologies of the Fourth Industrial Revolution. According to a report released by the Korea Science and Engineering Corporation (KISTEP), the global VR / AR market will grow to $ 105 billion by 2022. An important key to the growth of the VR / AR market is user immersion. VR is dependent on technology of hardware such as display and sensor for biometric signal recognition. In order to improve user's immersion feeling, it is important to transmit sensor data to display device more accurately and quickly. In this paper, we consider various sensor hardware dependencies of VR, and compare various correction methods and filtering methods to lower the Motion to Photon (MTP) time that user movement is fully reflected on the display using sensor devices.

• Journal of Korean Foot and Ankle Society
• /
• v.17 no.4
• /
• pp.272-276
• /
• 2013

Purpose: Recurrence is one of the most common complications after primary correction for hallux valgus deformities. The purpose of this study was to evaluate the usefulness of Scarf osteotomy with axial decompression in the treatment of recurrent hallux valgus. Materials and Methods: From April 2006 to April 2011, 14 cases (12 patients) of recurrent hallux valgus were managed with shortening Scarf osteotomy. Preoperative and postoperative radiographs were reviewed for the measurement of the hallux valgus angle (HVA), intermetatarsal angle (IMA), and the amount of the $1^{st}$ metatarsal shortening. Clinical outcomes including the visual analogue scale (VAS), the AOFAS score, and the range of motion [ROM] of the 1st metatarsophalangeal (MTP) joint were evaluated. Results: The mean HVA decreased from 27.9 degrees to 5.2 and the mean IMA decreased from 12.9 to 3.4. The mean VAS improved from 5.3 to 0.3 and the mean AOFAS score improved from 41 to 90. The mean amount of the 1st metatarsal shortening was 3.4 mm (2-5). The mean ROM of the $1^{st}$ MTP joint improved from 22 degrees (15-35) to 68 (55-75). Conclusion: Scarf osteotomy associated with axial decompression can be a useful revision procedure for the treatment of recurrent hallux valgus deformity.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.11
• /
• pp.1413-1420
• /
• 2018

The VR / AR market has grown significantly due to the development of virtual reality and augmented reality in the core technology field of the 4th Industrial Revolution. Since VR is basically focused on space and time, and the human brain is very sensitive to temporal events, it is important to make accurate I / O interface technology, one of the virtual reality technologies, not to affect the brain's cognitive ability. VR depends on the technology of the hardware such as the display and the sensor for biometric signal recognition. In this paper, in order to prevent the sensitive brain from affecting the sensor device in consideration of hardware dependency of VR, it is necessary to make various corrections to lower the motion to photon (MTP) to 20m / s or less experiments on the method and filtering were carried out.

• Korean Journal of Applied Biomechanics
• /
• v.34 no.2
• /
• pp.45-52
• /
• 2024

Objective: The purpose of this study was to measure the morphological characteristics of the foot and biomechanical variables of the lower extremity joints during vertical jump and investigate the relationship between foot morphology and biomechanics of vertical jump. Method: 24 men in their 20s (age: 22.42 ± 1.41 yrs, height: 173.37 ± 4.61 cm, weight: 72.02 ± 6.21 kg, foot length: 251.70 ± 8.68 mm) participated in the study. Morphological characteristics of the foot included the length of the first toe, the length of the second toe, and the horizontal length from the center of ankle joint to the achilles tendon (Plantar Flexion Moment Arm [PFMA]). Biomechanical variables were measured for plantar flexor strength of the ankle joint and peak angular velocity, moment, and power of the lower extremity joint during vertical jump. Results: There was a significant correlation between the length of the first toe and plantar flexion strength at 30°/s [r=.440, p=.016], the angular velocity of the metatarsophalangeal [MTP] joint [r=-.369, p=.038] while significant correlations between PFMA and the angular velocities of the knee joint [r=.369, p=.038] and ankle joint [r=.420, p=.021] were found. There were also significant correlations between the length of the first toe and the maximum moment of the hip joint [r=.379, p=.034], and the length of the second toe and the power of the hip joint [r=-.391, p=.029]. Finally, significant correlations between PFMA and the power of the ankle joint [r=.424, p=.019] and MTP joint [r=.367, p=.039] were found. Conclusion: Based on the results of this study, the length of the toe and PFMA would be related to the function of the lower extremity joint. Therefore, this should be considered when designing the functional structure of a shoe. Furthermore, this relationship can be applied to intensive training for the plantar flexors and toe flexors to improve power in athletic performance.

• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.237-240
• /
• 2004

본 논문에서는 앞으로 광대역통합망에서 사용자의 요구사항에 따른 QoS를 제공하기 위한 연구의 일환으로 여러 가지 서비스 모델과 메커니즘을 살펴보고, 라우팅 최적화를 위한 유전 알고리즘과 hybrid 유전알고리즘에 대하여 논한다. OSPF에 바탕을 둔 라우팅 최적화만으로 QoS가 충분하지 않은 경우 약간의 MPLS 경로가 QoS를 개선하기 위해 설정될 수 있다. 이러한 상보형 MPLS 라우팅을 위한 두 개의 MTP 모델을 제안하고. 적절한 네트워크 QoS 대책으로 네트워크 내의 최대 링크 이용을 고찰한다.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.38-41
• /
• 2005

The observation data from MTP-5HE ofEPA are used to study the temperature inversion phenomenon in the lower boundary layer in Taipei, Taichung and Kaohsiung of Taiwan. Characteristics of temperature inversion at three cities are extracted using different classification methods. The characteristics of temperature inversion in Taichung and Kaohsiung show a similar trend but are different from that in Taipei. The numbers of the occurrence of temperature inversion in Taichung and Kaohsiung were much larger than that in Taipei. The main types of temperature inversion in Taiwan are radiation inversion and frontal inversion. Compared to frontal inversion, radiation inversion on average occurs at a lower altitude, lasts a longer period, has a deeper thickness, and reaches a higher temperature difference of inversion. Frontal inversion plays a significant role for the inversion event lasting over 12 hours.

• Journal of Korean Foot and Ankle Society
• /
• v.15 no.3
• /
• pp.183-186
• /
• 2011

Extensor hallucis brevis (EHB) is only extensor of the first metatarsophalangeal (MTP) joint after modified Jones procedure. Therefore preserving the normal insertion of the EHB has been emphasized during that procedure. We experienced a case of EHB rupture after modified Jones procedure and had satisfied surgical outcome by partial transfer of extensor digitorum longus (EDL) of second toe.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.639-641
• /
• 2004

This paper presents the evaluaton procedures and the estimation model for DSM Potential by stage on residential sector in Korea. In general, the evaluation process of the potential savings for DSM measures or programs consists of baseline electricity consumption forecast and potential evaluation such as maximum technical potential(MTP), phased-in technical potential(PTP), economic potential (EP), and achievable potential(AP). The purpose of this paper is to establish the evaluation process of those DSM potential for residential sector.