• 대한임베디드공학회논문지
• /
• 제10권4호
• /
• pp.199-206
• /
• 2015

In this paper, we present the implementation of a secure OTP(One Time Password) generator for IoT(Internet of Things) devices. Basically, MTM(Mobile Trusted Module) is used and expanded considering secure IoT services. We combine the MTM architecture with a new hardware-based OTP generation engine. The new architecture is more secure, offering not only the security of devices but also that of the OTP service. We have implemented and verified the MTM-based OTP generator on a real mobile platform embedded with the MTM chip. The proposed method can be used as a solution for enhancing security of IoT devices and services.

• 복식문화연구
• /
• 제11권5호
• /
• pp.647-656
• /
• 2003

Mass customization utilizes the new computer technologies, supply chain management, product information management, and some level of customization of the product for the individual customer. This study aimed at grasping the actual conditions of mass customization of domestic men's suit industry and the use of MTM CAD program. The MTM apparel production programs that are used by five leading men's suit manufacturers in Korea were compared. The results of the study showed that most of the manufacturers produced mass customized men's suits to supply extraordinarily large or small size suit based on the individual order. The information listed on an order sheet used at shops was not necessarily corresponding to the information in the MTM CAD program that is use for production of suit ordered from the shop. The pattern data base on the MTM CAD program are constructed based on the sizing system of individual manufacturer. The most manufacturers translated the customer's body dimensions into difference between the standard pattern and the customer's needed adjustment.

• 대기
• /
• 제17권2호
• /
• pp.207-216
• /
• 2007

The Moving-nest Typhoon Model (MTM) was installed on the Korea Meteorological Administration (KMA)'s CRAY X1E in 2006 and started its test operation in August 2006 to provide track and intensity forecasts of tropical cyclones. In this study, feasibility of the MTM forecast is compared with the Global Data Assimilation and Prediction System (GDAPS) of the KMA and the operational typhoon forecast models in the Japan Meteorological Agency (JMA), from the sixth tropical cyclone to the twentieth in 2006. Forecast skills in terms of the storm position error of the two KMA models were comparable, but MTM showed a slightly better ability. While both GDAPS and MTM produced larger errors than JMA models in track forecast, the predicted intensity was much improved by MTM, making it comparable to the JMA's typhoon forecast model. It is believed that the Geophysical Fluid Dynamics Laboratory (GFDL) bogus initialization method in MTM improves the ability to forecast typhoon intensity.

• 한국의류산업학회지
• /
• 제18권6호
• /
• pp.746-754
• /
• 2016

This study aimed to investigate the status of ready-made suit and MTM (Made-to-measure) suit production with 10 men's suit brands turning over 200 billion won. Their target age group is late 30's to late 40's. Regarding production for the ready-made suit, eight out of 10 brands are using both KS and their own sizing. Classification of body shapes was done in 8 brands, mostly for upper body in simple ways (lean, normal, and obese). All brands are conducting fittings on only standard size. The number of sizes produced is varying depending on the brands; 9 to 17 for a jacket and 9 to 20 for a pair of pants. Regarding on the MTM production, four out of 10 brands have implemented MTM production. The rate of MTM production to their total production is about 15-20%. There were positive opinions on MTM production since it enables to reduce stocks through a small quantity of production for necessary sizes only. The reasons of orders of MTM production were answered as 'no size available', 'unique body shape', etc., and most orders were placed by consumers who are fat-bellied or have thick thighs. They have used MTM automated CAD software developed by Gerber Technology or Investronica. All the brands have utilized automated marker-making software and cutting facilities for MTM production.

• 한국전자파학회지:전자파기술
• /
• 제20권2호
• /
• pp.59-67
• /
• 2009

본고를 통해 초고주파 이론과 공학 분야는 물론 물리학, 재료공학의 기초 학문 분야에서도 지대한 관심을 모으고 있는 Metamaterial(MTM) 구조에 대해 조명하고자 한다. 먼저 MTM의 핵심이라고 할 수 있는 Left-Handedness(LH) 왼손 전파 법칙과 LH 발생 재질인 Double Negative(DNG) 재질에서의 전파 특성을 상대 유전율과 상대 투자율 평면에서 확인하고, 일반 매질인 Double Positive(DPS)형인 오른손 전파 법칙 Right-Handedness(=RH) 매질과의 결합(Composite Right-and Left-Hnaded=CRLH)에서 얻어지는 특징들을 살펴본다. 특히 DPS와 DNC의 결합에서 얻을 수 있는 음의 공진과 0차 공진(Zero-Order Resonance)을 언급하고 ZOR을 응용한 RF 부품의 소형화와 특성 개선사례를 소개한다. 또한, 안테나와 전자파 산란 특성에 MTM의 특수한 성질을 이용하여, 크기를 줄이거나 표면파를 억제하거나 혹은 방사 개구를 확대 또는 렌즈 특성을 얻어낸 사례도 언급된다 그리고 LH 특성은 아니지만 MTM 계열인 ENG(Epsilon Negative), MNG(Mu Negative), ENZ(Epsilon Near Zero)를 응용한 예들을 보이고, MTM 관점에서 FSS(Frequency Selective Surface )의 특성을 논의하고, 그간에 발표된 대표적 MTM 연구 결과에 대한 소개를 마치고자 한다.

• 복식
• /
• 제41권
• /
• pp.185-206
• /
• 1998

The purpose of this study was to improve productivity for maximum effects with the present equipments and staff. This study compared and analyzed the mea-sured time by using stop watch method and MTM, which was the new measuring method. The flow and results of this study were as follows: 1. This study investigated the theoretical background the efficiency for production management, and the way of productivity improvement through documentary research. 2. Setting up the standard flow on the experi-mental company production, making out a process chart and measuring the actual working hour. 3. The study measured the allowance time applying work sampling. 4. Each process of the movement analysis was filmed by video to use basic data. 5. MTM analysis was taken by choosing 10 processes from front bodice according to the basic movement of MTM. Through the results, this study exclude unneccesary movements and suggest a method for working ways. 6. Using the actual working hour measured by a stop watch calculated the pitch time and presumed the amount of daily productivity. 7. The result of the work sampling came out as 38% of allowance rate. It was 13% higher than the standard amount of woman's jacket allowance rate, which was 25%. The most influencing factor was work discussion. That was because there were commuication problem of the work way between the operator and leader. More adequate use of flow table and level passing table was needed. There were the problems that inappropriate places and sizes made the distance of movements longer and often needed more adjustment of works and surroundings. To prevent breakdowns equipments check ups were necessary before works. 8. The results of MTM analysis were as follow : the time was reduced 40% than the actual measured time by a stop watch. This was because the leveling of the operator was included in the real calculation. Also, leveling was included in MTM analysis and all the conditions were standarized. Therefore MTM method was a scientidic measuring way of establishing the standard time. The presented method of this study, suggested an ideal method eliminating unneccesary motions, and presented standardization of works. Improvement of working methods, work condition and simplifying motions in each 10 processes reduced the working time from total 656 seconds to 301 seconds. 9. The way and time of working was linked together in the MTM analysis methods. Thus data from MTM help suggest not only establishing standard time but also establishing stan-dard work. Plus it includes various ability for improvements of working ways. So it is an objective method which can be widely used in other work studies. 10. The function of a time study is to determine the amount of work produced with a given method. The work rate is used to establish the cost of labor. The wage of worker must be calculated per unit time which is deter-mined before the time study is made. This study tried to introduce the incentive rule for deciding wages according to the standard time by MTM method.

• 대한산업공학회지
• /
• 제6권1호
• /
• pp.39-44
• /
• 1980

조립 라인의 평형 정도와 생산성 향상 가능성을 분석하기 위해 MTM 기법이 적용되었다. 포니 자동차의 변속기 조립 라인의 실제 사례 연구를 통해 가장 많은 작업량이 있는 애로 공정이 MTM 자료에 기준하여 127% 효율로 작업되고 보통공정이 102% 효율로 작업되는 것이 조사되었다. 이는 이 라인의 능률이 양호하다는 것을 보여 주고 같은 수의 작업자로 두배까지의 생산량 증가라는 현 관리자의 희망대로 될 수 없다는 것을 보여 준다. 더욱 많은 생산량을 원한다면 더 많은 작업자를 투입해야 할 것이고 만약 작다면 더 적은 작업자로 더 많고 균형된 작업량을 할당하는 것이 필요할 것이다. MTM 분석중 여러가지 방법 개선점이 지적되었고 이는 작업 사이클당 육체적 노력을 증가시키지 않은 상태에서 표준 시간의 감소와 작업량의 증가를 의미하는 것이다.

• Journal of Acupuncture Research
• /
• 제26권4호
• /
• pp.91-98
• /
• 2009

Objectives : The objective of this review is to introduce the basic concepts on the febrile disease in the Mongolian Traditional Medicine(MTM). Methods : We comprehensively reviewed related textbooks in Mongolian and articles searched from China National Knowledge Infrastructure(CNKI) on febrile disease about MTM and summarized the pathophysiologic basis of, and treatment principles in MTM. Results and Conclusions : 1. In MTM, there are basic concepts such as theory of Arga-Bilig, theory of five elements, theory of three elements(人體三素), theory of seven constitutions and three discharges(七元三濊). Most of all, theory of three elements, which is about the basic elements of human body in MTM, is important fundamental notions for explaining human physiology and pathology. In MTM, It is explained that the imbalance of three elements, namely khii, shar, bad-kan is the root of all disease. Especially, febrile disease is treated by suppressing activated shar and blood(血液), which have fire characters, and managing various additional symptoms by balancing three elements and eliminating miasma(邪氣), inappropriate substances such as bile water(shar yc, 黃水) or blood stasis(惡血) simultaneously. 2. In MTM, both of internal treatment modalities(various medicinal therapy) and external treatment modalities(physical therapy) have been used for febrile disease. Food therapy and life style modification also have been recognized as important treatment methods. These aspects correspond to wholism theory of Korean Traditional Medicine(KTM). Further studies about details of each treatment methods will discover new applicable treatment method and make broaden the external boundaries of the KTM.

• 대한토목학회논문집
• /
• 제33권1호
• /
• pp.71-80
• /
• 2013

설계를 위한 교량의 해석모델은 구조물의 안전성을 확보하기 위해 자중 및 외부하중은 되도록 크게, 구조물의 강성은 되도록 작게 평가하는 것이 일반적이다. 때문에 설계모델을 이용한 버페팅 응답은 실제 공용교량의 버페팅 응답과 차이를 나타낸다. 공용교량의 버페팅 응답을 정확하게 예측하기 위해서는 공용교량의 동적특성을 계측하여 해석모델이 계측값을 반영하도록 수정하여야 한다. 일반적으로, 실제교량과 동일한 고유진동수를 갖는 MBM(Measurement -based Model)을 구축하기 위해 설계모델의 다양한 물성치를 파라미터로 조정하며 계측된 고유진동수와 일치시키는 MTM(Manual Tuning Method)이 사용되고 있다. MTM은 파라미터의 초기치 설정에 따른 임의성이 높고 여러 수렴점을 가질 수 있어 분석에 상당한 노력이 소요된다. 본 연구는 버페팅해석에 널리 적용되고 있는 단일모드 주파수영역 해석법이 구조물의 모드형상, 고유진동수 및 감쇠비의 동적특성만을 이용하는 점에 착안하여 MTM과정 없이 설계모델의 버페팅 응답을 공용교량의 버페팅 응답으로 보정하는 BRCM(Buffeting Response Correction Method)을 제안하였다. BRCM은 설계모델의 모드형상 별 버페팅 응답을 공용교량의 고유진동수만으로 보정하는 방법이다. 공용교량의 고유진동수는 상시진동에 의한 계측 가속도로부터 산정하였다. BRCM의 적용성을 단순보 모델의 시간이력 버페팅해석을 수행하여 수치적으로 평가하였으며 공용교량모델을 이용한 버페팅해석결과, BRCM과 MTM의 응답 차이는 3% 이하로 나타났다. 공용교량의 실시간 계측시스템에 BRCM을 도입할 경우 사장교의 유지관리 효율성을 높일 수 있을 것으로 기대된다.

• 한국전자파학회논문지
• /
• 제20권10호
• /
• pp.1091-1096
• /
• 2009

본 논문에서는 공진 MTM-TL(Metamaterial Transmission Line) 등가 회로를 이용하여 방사 및 회로 파라미터의 추출 식을 제시하였다. 특히 개방 또는 단락 상태에서 방사 소자인 직렬 $R_0$와 병렬 $G_0$를 EM 시뮬레이션 또는 측정을 통해 얻은 S-parameterd(|$S_{11}$|)를 이용하여 추출한다, EM 시뮬레이션의 결과, 추출한 파라미터를 이용한 회로 시뮬레이션의 결과 그리고 측정 결과가 매우 일치함을 확인하였다.