• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.71-71
• /
• 2009

전자제품의 다양한 기능들의 융복합화 및 휴대 편의성 경향은 이제 더 이상 새로운 것이 아니다. 이러한 추세에 따라 전자부품들은 모듈화 되고, 휴대하기 용이해 지고 있다. 또한 다양한 제품 디자인에 적용하기 위해 제품에 장착되는 부품의 기구적 위치 배열의 한계 또한 제약 받고 있다. 따라서 최근의 전자부품은 모듈화 되고 있으며, 기구적 한계를 극복하기 위한 Flexible 모듈의 사용이 증가하고 있다. 또한 양산측면에서 Roll-to-Roll(R2R) 방식을 적용함으로써 생산성을 극대화 하고 있다. 이때 R2R 적용을 위해서는 제품이 굴곡 될 수 있도록 유연성이 보장되는 Bendable 전자모듈의 개발이 필수적으로 요구되고 있다. Flexible 기판은 더 이상 새로운 기술이 아니지만, Felxible 기판 내부에 칩이 내장되고, 회로가 형성되어 자체적으로 기능을 수행할 수 있도록 한 Bendable 전자모듈을 R2R 방식으로 제조하는 기술은 매우 새로운 접근이라 할 수 있다. 이러한 기술개발이 현실화 된다면, Wearable Electronics 및 Flexible Display 등 다양한 전자제품에 응용될 수 있을 것으로 기대된다. 그러나 이러한 제품의 상용화를 위해서는 Bendable 전자모듈에 대한 신뢰성이 확보되고, 제품으로써의 수명이 보증되어야 한다. 신규 개발되는 제품의 신뢰성 검증항목이나 수명평가 모델은 현재까지 제안되지 않고 있는 실정이다. 또한 다양한 사용 환경에서 고장(Failure) 발생을 유발하는 스트레스 인자(Stress Factor)를 도출함으로써, 가속시험 또는 신뢰성 검증을 위한 인가 스트레스를 선정할 수 있다. 그러나 이러한 고장물리를 기반으로 스트레스 인자를 해석한 결과는 아직 보고되고 있지 않다. 따라서 본 연구에서는 $50{\mu}m$ 두께의 Si Chip에 저항변화를 관찰하기 위한 회로를 형성한 후 폴리이미드 기판을 이용하여 Si Chip이 임베딩된 Bendable 전자모듈을 제작하였다. 전자모듈의 실사용 환경에서의 수명예측을 위한 사전단계로써 고장물리에 기반한 고장모드와 고장메카니즘을 해석하는 것이 최우선 수행되어야 하며, 이를 바탕으로 고장을 유발하는 스트레스 인자를 도출 하였다. 고장도출을 위해 시제품은 JEDEC J-STD-020C의 MSL시험, 고온가압시험, 열충격시험 및 고온저장시험을 각각 수행하였으며, 이로부터 발생된 각각의 고장유형을 분석함으로써 스트레스 인자를 도출하였다. 또한 모아레(Moire) 간섭계를 이용하여 제작된 샘플의 온도변화에 따른 변형해석을 수행하였고, 동시에 Half Symetry Model을 이용한 유한요소해석(FEA)을 수행하여 변형해석 및 스트레스 유발원인을 도출하였다. 이 결과로 부터 고장물리 기반의 고장해석과 Moire 분석 그리고 시뮬레이션 해석 결과를 바탕으로 Bendable 전자모듈의 고장유발 스트레스 인자를 해석할 수 있었다.

• Journal of agriculture & life science
• /
• v.52 no.6
• /
• pp.27-36
• /
• 2018

Recently, the demand for new cultivar of oriental mustard(Brassica juncea) is increased as the consumption of oriental mustard has increased dramatically in the market due to Kimchi is attracting the world's attention. However, absence of seed supply system can cause many problems including inbreeding depression due to self seed production, deterioration of the seed purity and heterogeneity of commercial seed. To establish the $F_1$ variety breeding system of oriental mustard, pure line and inbred lines were screened from inbreeding genetic resources. Male-sterile line was also selected from breeding combinations for the quality improvement of mustard. The combining ability from(Indojasai ${\times}$ Goheungdamyang) combinations and isolation line of(MS910 ${\times}$ Japan red mustard 8 ${\times}$ Ganghwa mustard 9) was highest, thus these lines were selected as parental lines. PCR(Polymerase Chain Reaction) and gene sequence analysis revealed that the genes related to CMS(orf263, orf220, and orf288) were distributed in mitochondria. The isolated lines from this study also showed good performance in yield test and farmhouse prove test.

• Journal of The Geomorphological Association of Korea
• /
• v.23 no.1
• /
• pp.17-33
• /
• 2016

Samples from newly exposed outcrop of sedimentary layers forming Jeongdongjin coastal terrace in Gangreung area are collected and analyzed to find the sedimentary environment. The site are located at the gentle hillslope of the terrace surface area. The height of the outcrop is about 8m and the altitude of it's highest part is 68~73m MSL. The lowest part of this out crop is the partly consolidated sand layer with gravel veneer within it. It is found that this part is not in-situ weathered sand stone through the OSL method. This sand layer is overlain by the gravel layer with sand matrix. The shapes of the gravels from this part are mainly 'platy', 'elongated', and 'bladed' by the index of Sneed and Folk(1958). In addition, mean roundness is not so high. It is sceptical to regard this part as marine sediments which are continuously exposed to erosional processes. The boundary between the lowest sand layer and gravel layer showing the abrupt change in forming material without any mixture or transitional zone, so gravels are seemed to deposited after some degree of consolidation of the lowest sand layer. In addition, the hight of the boundary between layers are changed by the place, so the surface of the partly consolidated sand layer is not flat and has irregularity on topography when it buried by gravels. Main part of this out crop is the poorly sorted coarse gravel(22.4mm) with sand matrix($1.36{\phi}$) layer with at least 2m thick covering the relatively fine gravels discussed above. Over 20% of particles have 'very platy', 'very elongated' and 'very bladed' shape and only less than 5% of particles have 'compact' shape, So this particles are also very hard to be regard as marine gravels which are abraded by marine processes. It can be concluded that this gravel layer formed by fluvial processes rather than coastal processes base on the form of the clast and sedimentary structure. The gravel layer is covered by fine($3{\sim}4{\phi}$) material layers of psudo-gleization which showing inter-bedding of red and white layers. Chemical composition of matrix and other fine materials should be analyzed in further studies. It is attempted to fine the burial ages of the sediment using OSL method, but failed by the saturation. So it can be assumed that these sediments have be buried over 120ka.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.6
• /
• pp.446-457
• /
• 2020

Crescentic sand bar in the coastal zone of eastern Korea is a common morphological feature and the rhythmic patterns exist constantly except for high wave energy events. However, four consecutive typhoons that directly and indirectly affected the East Sea of Korea from September to October in 2019 impacted the formation of longshore uniform sand bar and overall shoreline retreats (approx. 2 m) although repetitive erosion and accretion patterns exist near the shoreline. Widely used XBeach to predict storm erosions in the beach is utilized to investigate the morphological response to a series of storms and each storm impact (NE-E wave incidence). Several calibration processes for improved XBeach modeling are conducted by recently reported calibration methods and the optimal calibration set obtained is applied to the numerical simulation. Using observed wave, tide, and pre & post-storm bathymetries data with optimal calibration set for XBeach input, XBeach successfully reproduces erosion and accretion patterns near MSL (BSS = 0.77 (Erosion profile), 0.87 (Accretion profile)) and observed the formation of the longshore uniform sandbar. As a result of analysis of simulated total sediment transport vectors and bed level changes at each storm peak Hs, the incident wave direction contributes considerable impact to the behavior of crescentic sandbar. Moreover, not only the wave height but also storm duration affects the magnitude of the sediment transport. However, model results suggest that additional calibration processes are needed to predict the exact crest position of bar and bed level changes across the inner surfzone.

• Journal of Advanced Navigation Technology
• /
• v.25 no.3
• /
• pp.248-255
• /
• 2021

The main causes of the July 2013 OZ 214 accident were poorly performed approach and the failure to recognize the autothrottle in the HOLD position which the automated speed control was not provided. The pilots late decision for go-around was also a critical factor leading to the accident. The B777 POM restricts the use of FLCH mode beyond the FAF. This research utilized the QAR data of an airline's B777 fleet in the period of two years where 44 cases were found. In many cases, the FLCH mode was used for rapid descent from an higher than normal situation. In addition, in the base turn, continuous use of FLCH mode even when the path was below the glide path were observed. Airports with elevation above 500 ft MSL had a higher rate of occurrence. In this research, the proper descent planning and vertical path monitoring, and the adherence to the limitation set in the manuals and the stabilized approach criteria were re-emphasized as mitigation to reduce event occurences.

• Mass Spectrometry Letters
• /
• v.14 no.4
• /
• pp.153-159
• /
• 2023

The copper ion, Cu(II), binding sites for amyloid fragment Aβ1-16 (=Aβ16 ) were investigated to explain the biological activity difference in the Aβ16 aggregation process. The [M+Cu+(z-2)H]^z+ (z = 2, 3 and 4, M = Aβ16 monomer) and [D+Cu+(z-2)H]^z+ (z = 3 and 5, D = Aβ16 dimer) structures were investigated using electrospray ionization (ESI) mass spectrometry (MS) and tandem mass spectrometry (MS/MS). Fragment ions of the [M+Cu+(z-2)H]^z+ and [D+Cu+(z-2)H]^z+ complexes were observed using collision-induced dissociation MS/MS. Three different fragmentation patterns (fragment "a", "b", and "y" ion series) were observed in the MS/MS spectrum of the (Aβ16 monomer or dimer-Cu) complex, with the "b" and "y" ion series regularly observed. The "a" ion series was not observed in the MS/MS spectrum of the [M+Cu+2H]⁴⁺ complex. In the non-covalent bond dissociation process, the [D+Cu+3H]⁵⁺ complex separated into three components ([M+Cu+H]³⁺, M³⁺, and M²⁺), and the [M+Cu]²⁺ subunit was not observed. The {M + fragment ion of [M+Cu+H]³⁺} fragmentation pattern was observed during the covalent bond dissociation of the [D+Cu +3H]⁵⁺ complex. The {M + [M+Cu+H]³⁺} complex geometry was assumed to be stable in the [D+Cu+3H]⁵⁺ complex. The {M + fragment ion of [M+Cu]²⁺} fragmentation pattern was also observed in the MS/MS spectrum of the [D+Cu+H]³⁺ complex. The {M + [y₉+Cu]¹⁺} fragment ion was the characteristic fragment ion. The [D+Cu+H]³⁺ and [D+Cu+3H]⁵⁺ complexes were likely to form a monomer-monomer-Cu (M-M-Cu) structure instead of a monomer-Cu-monomer (M-Cu-M) structure.

• Korean Journal of Environment and Ecology
• /
• v.16 no.1
• /
• pp.34-45
• /
• 2002

Of the four tidal flat areas(Yeocha-ri, Dongmak-ri, Sundu-ri and Donggum-ri) on Southern Ganghwa Island, the distribution of migratory waterbirds showed a difference in the numbers of individuals and species. Higher numbers of individuals and species were observed on the Yeocha-ri tidal flat. The dominant waterbirds species at the four areas was the Dentin(Calidris alpina). This species showed an occupancy rate(42.0-79.1%) on the Yeocha-ri tidal flat, which was much higher relative to the other areas. The Yeocha-ri tidal flats were higher relative to MSL than the other tidal flats. When the Dongmak-ri tidal flat was covered by sea water, the Yeocha-ri tidal flat was 0.0317$\textrm{km}^2$ in area and on this space we observed many resting waterbirds. The biomass of the waterbirds' potential prey on the Yeocha-ri tidal flat was higher(1.6~2.5$\times$) than other tidal flats. Twenty-three species and 266 individuals were found on the Yeocha-ri tidal flat, which was higher than the tidal flats. The food of Dunlin, which was the dominant species in these four areas, was mainly Reticunassa festiva and Umbonium thomasi(Gastropoda) and Perinereis aibuitensis(Polychaeta). A Dunlin(38.11g) used to eat 1,295 individuals of these food items for daily basal energy. Gastropod, its density was highest on Yeocha-ri tidal flats. The distribution of waterbirds seemed to be closely related with the distribution of the benthos, space and safety of resting site. We suggest that the environments of tidal flats, which are rich foraging habitats, are important factors for conservation of waterbirds.

• Journal of Wetlands Research
• /
• v.17 no.1
• /
• pp.26-37
• /
• 2015

Halophyte distribution pattern and area in the Suncheon-bay and Beolgyo estuary coastal wetlands were analyzed using KOMPSAT-2 landsat images were taken in 2008 and 2009, and field investigations were fulfilled for confirming the precise boundaries of individual halophyte areas. The salt-marsh vegetation in those areas can be classified mainly into two dominant communities: Suaeda japonica-dominant and Phragmites communis-dominant communities. In order to identify sedimentary characteristics, tidal-flat surface leveling and sedimentary facies analysis had been conducted. The sedimentary facies of marsh area are mostly silty clayey and clay facies with a little seasonal change and its slope is very gentle (0.0007~0.002 in gradient). Phragmites communis and Suaeda japonica communities were distributed in the mud-flat zone between 0.7 m and 1.8 m higher than MSL (mean sea level): zone of 1.1~1.8 m in the former and zone of 0.7~1.3 m in the latter. In the Suncheon-bay estuarine wetland, on the basis of 2009 distribution, Phragmites communis-dominant and Suaeda japonica-dominant communities are about $0.79km^2$ and $0.22km^2$ in distribution area, respectively. On the other hand, Bulgyo estuarine marsh shows that the distribution areas of Phragmites communis-dominant and Suaeda japonica-dominant communities are about $0.31km^2$ and 0.031km2 in distribution area, respectively. Individual 105 and 60 dominant community areas and their distribution patterns can be well defined and indicated in the Suncheon-bay and Bulgyo estuarine marshes, respectively. The distribution pattern and area of hylophyte communities analyzed in this study based on 2008/2009 satellite images would be valuable as a base of future monitoring of salt-marsh related studies in the study area which is the most important salt-marsh research site in Korea.