• Journal of Electrical Engineering and Technology
• /
• v.9 no.1
• /
• pp.259-267
• /
• 2014

This paper presents a simple, consistent and reliable technique to identify detected partial discharges (PD) using an acoustic ultrasonic method. A new reliable algorithm named 'Simple Partial Discharge Identifier' (SPDI) is proposed to perform identification process of the detected ultrasonic signals of PD. Experimental works based on recommended practices were setup and the ultrasonic signals of the PD were recorded. The PD data is then employed as the reference data. The SPDI developed has been tested against commonly used models in Neural Network (NN). Results from the SPDI algorithm shows more reliable results compared to NN models results. Comparison made on the mean square error (MSE) results shows SPDI produces the desired outcome with lower MSE in 97.17% of trials. Low error of SPDI indicates a high reliability to be applied in the identification of PD.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.8
• /
• pp.1497-1505
• /
• 2010

The present study was performed to investigate the effect of aging on muscular activity of older subjects under the condition of fixed load muscle contraction. SEMG signals were recorded from old (46 women) and young (45 women) groups performing sustained isometric elbow flexion contraction with a fixed load during 30 seconds. Linear regression and mean square error (MSE) analysis with four characteristic variables (ARV, RMS, MDF, MNF) were used to compare the age-related difference (of local muscle fatigue and fluctuation of the amplitude and frequency) in the SEMG signal. The main results can be summarized as follows: During sustained muscle contraction with a fixed load: i) the MSE values of amplitude (ARV, RMS) and frequency (MDF, MNF) variables were more than 30% higher for the young than for the old adults; ii) the measures of local muscle fatigue (slope of the MDF and MNF) indicated greater fatigue in the old; and iii) the rate of increase of the SEMG amplitude was higher for the young than the old.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.04b
• /
• pp.598-600
• /
• 2001

대용량의 동영상 데이터 이용에 있어 효과적인 동영상 검색을 위해서는 동영상 데이터의 색인과정이 필요하다. 본 논문은 AVI영상에서 동여상 장면 전환점 검출에 관한 효과적인 방법을 제안한다. 제안된 방법은 프렝미을 대각선 방향의 픽셀 값을 추출하고 정지영상으로 변환하여 동영상의 전체 구조를 파악할 수 있으며, 장면 전한점을 한눈에 확인할 수 있다. 각각의 프레임에서 추추란 픽셀의 칼라 값을 A행렬 i(프레임 수)xj(프레임 영상 높이)로 저장하고, MSE(Mean Square Error)를 용해서 일정의 임계값에 도달하지 못할 경우 이 프레임을 장면 전환점으로 검출한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.04a
• /
• pp.289-292
• /
• 2002

동영상 검색 시스템은 사용자가 전체 동영상 정보를 한눈에 파악할 수 있어야 한다. 필요한 경우 원하는 지점부터 직접 재생할 수 있도록 해야 한다. 이에 대한 많은 연구가 수행되고 있다. 그러나 데이터를 처리하는데 시간이 오래 걸리는 등의 몇가지 문제점이 있다. 따라서 본 논문은 내용기반 색인에 기초가 될 동영상의 장면전환점 검출에 관한 효과적인 방법을 제안하였다. 제안된 방법은 프레임의 수평방향, 수직방향 또는 대각선 방향으로 나누어 일정한 픽셀 값을 추출하여 정지영상으로 변환하였다. 각각의 프레임에서 추출한 픽셀의 칼라값을 저장하고 MSE(Mean Square Error)를 이용하여 일정한 임계값에 도달하지 못한 프레임을 장면전환점으로 검출하였다. 검출된 장면전환점을 이용하여 변화된 프레임의 장면전환을 검색하는 시스템을 구현하였다.

• Computers and Concrete
• /
• v.10 no.4
• /
• pp.379-390
• /
• 2012

In this paper, the mechanical strength of different lightweight mortars made with 0, 5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95 and 100 percentage of scoria instead of sand and 0.55 water-cement ratio and 350 $kg/m^3$ cement content is investigated. The experimental result showed 7.9%, 16.7% and 49% decrease in compressive strength, tensile strength and mortar density, respectively, by using 100% scoria instead of sand in the mortar. The normalized compressive and tensile strength data are applied for artificial neural network (ANN) generation using generalized regression neural network (GRNN). Totally, 90 experimental data were selected randomly and applied to find the best network with minimum mean square error (MSE) and maximum correlation of determination. The created GRNN with 2 input layers, 2 output layers and a network spread of 0.1 had minimum MSE close to 0 and maximum correlation of determination close to 1.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.638-642
• /
• 2002

User in video data utilization of high-capacity can grasp whole video data at a look. Offer frame list that summarize information of video data to do so that can remake video from branch that want when need. Need index process of video data for effective video retrieval. This treatise wishes to propose effective method about scene change point detection of video that is been based on contents base index. Proposed method video data so that can grasp whole structure of video detection color value of schedule pixel for diagonal line direction in image sampling do. Data that get into sampling could grasp scene change point on one eye. Color value of pixel that detection in each frame is i frame number by i$\times$j procession to procession A, j stores to reflex height of frame. Introduce MSE and calculate mean error of each frame. If exceed mean error and schedule critical value, wish to detect the frame for scene change point.

• Journal of Convergence for Information Technology
• /
• v.11 no.12
• /
• pp.14-21
• /
• 2021

In this paper, it is shown how the performance of the monopulse algorithm in the presence of an additive noise can be obtained analytically. In the previous study, analytic performance analysis based on the first-order Taylor series and the second-order Taylor series has been conducted. By adopting the third-order Taylor series, it is shown that the analytic performance based on the third-order Taylor series can be made closer to the performance of the original monopulse algorithm than the analytic performance based on the first-order Taylor series and the second-order Taylor series. The analytic MSE based on the third-order Taylor approximation reduces the analytic MSE error based on the second-order Taylor approximation by 89.5%. It also shows faster results in all cases than the Monte Carlo-based MSE. Through this study, it is possible to explicitly analyze the angle estimation ability of monopulse radar in an environment where noise jamming is applied.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.5
• /
• pp.2197-2204
• /
• 2015

In recent years, medical image diagnosis has growing significant momentous in the medicinal field. Brain and lung image of patient are distorted with salt and pepper noise is caused by moving the head and chest during scanning process of patients. Reconstruction of these images is a most significant field of diagnostic evaluation and is produced clearly through techniques such as linear or non-linear filtering. However, restored images are produced with smaller amount of noise reduction in the presence of huge magnitude of salt and pepper noises. To eliminate the high density of salt and pepper noises from the reproduction of images, a new efficient fuzzy based median filtering algorithm with a moderate elapsed time is proposed in this paper. Reproduction image results show enhanced performance for the proposed algorithm over other available noise reduction filtering techniques in terms of peak signal -to -noise ratio (PSNR), mean square error (MSE), root mean square error (RMSE), mean absolute error (MAE), image enhancement factor (IMF) and structural similarity (SSIM) value when tested on different medical images like magnetic resonance imaging (MRI) and computer tomography (CT) scan brain image and CT scan lung image. The introduced algorithm is switching filter that recognize the noise pixels and then corrects them by using median filter with fuzzy two-sided π- membership function for extracting the local information.

• Journal of Korean Association for Spatial Structures
• /
• v.23 no.3
• /
• pp.87-94
• /
• 2023

Chloride is one of the most common threats to reinforced concrete (RC) durability. Alkaline environment of concrete makes a passive layer on the surface of reinforcement bars that prevents the bar from corrosion. However, when the chloride concentration amount at the reinforcement bar reaches a certain level, deterioration of the passive protection layer occurs, causing corrosion and ultimately reducing the structure's safety and durability. Therefore, understanding the chloride diffusion and its prediction are important to evaluate the safety and durability of RC structure. In this study, the chloride diffusion coefficient is predicted by machine learning techniques. Various machine learning techniques such as multiple linear regression, decision tree, random forest, support vector machine, artificial neural networks, extreme gradient boosting annd k-nearest neighbor were used and accuracy of there models were compared. In order to evaluate the accuracy, root mean square error (RMSE), mean square error (MSE), mean absolute error (MAE) and coefficient of determination (R2) were used as prediction performance indices. The k-fold cross-validation procedure was used to estimate the performance of machine learning models when making predictions on data not used during training. Grid search was applied to hyperparameter optimization. It has been shown from numerical simulation that ensemble learning methods such as random forest and extreme gradient boosting successfully predicted the chloride diffusion coefficient and artificial neural networks also provided accurate result.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.12
• /
• pp.2762-2770
• /
• 2012

In this paper, we propose a novel approach to effectively compress the sub-images transformed from the picked-up elemental images in integral imaging, in which motion vectors of the object in each sub-image are fast and accurately estimated and compensated by combined use of MSE(mean square error)-based TSS(tree-step search) and FS(full search) schemes. This is, the possible object areas in each sub-image are searched by using the fast TSS algorithm in advance, then the these selected object areas are fully searched with the accurate FS algorithm. Furthermore, the sub-images in which all object's motion vectors are compensated, are transformed into the residual images by using the difference image method and finally compressed with the MPEG-4 algorithm. Experimental results reveal that the proposed method shows 214% improvement in the compression time per each image frame compared to that of the conventional method while keeping the same compression ratio with the conventional method. These successful results confirm the feasibility of the proposed method in the practical application.