• The KIPS Transactions:PartC
• /
• v.9C no.4
• /
• pp.581-588
• /
• 2002

In this paper, we newly propose the optical CDMA routing scheme for the radio access network. At the radio base station (RBS), the received radio signals are multiplied by the PN codes and converted to the CDMA radio signals. In the next optical CDMAS are performed and multiplxed by using the PN codes which are the addresses of the routing mobile switching center (MSC). At the MSC, the CDMA radio signals are routined to another MSC by the CDM receiver at the routing node. In the case MSC is equal to the desired MSC, the radio signal is correlated by the two-layerd spectrum despreading at a time. Finally we theoretically analyze the signal-to-interference and noise power ratio of regenerated signal and the routing error probability and show the availability of proposed scheme.

• Journal of Engineering Education Research
• /
• v.17 no.3
• /
• pp.51-58
• /
• 2014

The main objective of this research lies in estimating how much importance the educators of professional general education and MSC curriculum put on assessment, and, thereafter, take what support should be provided for the efficient assessment of education. The subjects of this research are educators of professional general education and MSC curriculum in the engineering education enrichment program at the 58 universities out of 72 universities where the accreditation for engineering education is implemented. Accordingly questionnaires were distributed to a total of 58 universities among which 136 questionnaires were collected. The data analysis methods, mean and response sample T test, were used in this research. The following conclusions were drawn from the results of this research. First, tile mean of importance and performance in the 'assessment activities' were relatively high. However, in tile assessment, the assessment performance was relatively lower than the assessment importance. Second, the results of the Importance-Performance Matrix in the 'assessment activities' was analyzed by two ways. First, Analyzed with the scale mean, The result means that Keep up the Good Work (KGW) sector included all factors. Second, Analyzed with the actual mean, The result means that KGW sector included 5 factors A, J, B, D, C. Possible Overkill(PO) sector included factors C, I. Low Priority(LP) sector included 4 factors K, E, H, L. Concentrate Here (CH) sector included factor G.

• Journal of Veterinary Clinics
• /
• v.37 no.5
• /
• pp.261-269
• /
• 2020

The purpose of this study is to investigate the clinical effects of carboxymethyl chitosan (CMC) and adipose-derived mesenchymal stem cells (MSCs) on osteoarthritis (OA). Thirty New Zealand white rabbits were used as cranial cruciate ligament transection and partial meniscectomy models. The rabbits were divided into five groups (n = 6) according to the intra-articular injection materials: the control group with PBS, the HA group with hyaluronic acid, the CMC group with CMC, the MSC group with MSCs emerged in PBS, and the MSC+CMC group with CMC and MSCs. Knee thickness, extension angle, gross morphology, histopathology and immunohistochemistry were performed to evaluate the effects of CMC and MSCs on rabbit OA. On the morphologic and histologic examination, the articular surfaces of the femur and tibia were markedly damaged in control group with higher Mankin score and lower cartilage surface thickness. However, OA related cartilage defects were alleviated by the treatment of MSC and/or CMC. The expressions of apoptotic and inflammatory cytokines were decreased and cartilage extracellular matrix (ECM) related collagens I and II were enhanced by the treatment of MSC and/or CMC. In conclusion, this study showed that CMC and MSC treatments have a beneficial effects on OA via the protection of cartilage damage, the stimulation of ECM, and the inhibition of inflammatory and apoptotic reaction.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.5
• /
• pp.1057-1063
• /
• 2010

Development of e-navigation strategy which was proposed by seven member states coordinated by United Kingdom in MSC committee of IMO has been conducted for user needs definition, gap analysis cooperating with NAV, COMSAR and STW sub-committee. After prominent progress of development was done in Correspondence group, MSC 85 has approved the result of the group and conducted the development of e-navigation implementation plan to be finished in 2012. It is necessary to prepare the strategy and plan of our country identifying and perceiving the core objects and basic concept of e-navigation developed in the international community. This paper presents the progress of e-navigation development work until this stage and gives some recommendations for the domestic plan to cope with e-navigation.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.229-234
• /
• 2002

Under the hostile influence of the extreme space environmental conditions due to the deep space and direct solar flux, the thermal control in space applications is especially of major importance. There are tight temperature range restrictions for electro-optical elements while on the other hand there are low power consumption requirements due to the limited energy sources on the spacecraft. So, we usually have strong requirement of thermal and power control module in space applications. In this paper, the design concept of a thermal and power control module in the MSC(Multi-Spectral Camera) system which will be a payload on KOMPSATII is described in terms of H/W & S/W. This thermal and power control module, called THTM(Thermal and Telemetry Module) in MSC, resides inside the PMU(Payload Management Unit) which is responsible for the proper management of the MSC payload for controlling and monitoring the temperature insides the EOS(Electro-Optic System) and gathering all the analog telemetry from all the MSC sub-units, etc. Particularly, the designed heater controller has the special mode of "duty cycle" in addition to normal closed loop control mode as usual. THTM controls heaters in open loop according to on/off set time designed through analysis in duty cycle mode in case of all thermistor failure whereas it controls heaters by comparing the thermistor value to temperature based on closed loop in normal mode. And a designed THTM provides a checking and protection method against the failure in thermal control command using the test pulse in command itself.

• Molecules and Cells
• /
• v.44 no.8
• /
• pp.580-590
• /
• 2021

Patients with severe asthma have unmet clinical needs for effective and safe therapies. One possibility may be mesenchymal stem cell (MSC) therapy, which can improve asthma in murine models. However, it remains unclear how MSCs exert their beneficial effects in asthma. Here, we examined the effect of human umbilical cord blood-derived MSCs (hUC-MSC) on two mouse models of severe asthma, namely, Alternaria alternata-induced and house dust mite (HDM)/diesel exhaust particle (DEP)-induced asthma. hUC-MSC treatment attenuated lung type 2 (Th2 and type 2 innate lymphoid cell) inflammation in both models. However, these effects were only observed with particular treatment routes and timings. In vitro co-culture showed that hUC-MSC directly downregulated the interleukin (IL)-5 and IL-13 production of differentiated mouse Th2 cells and peripheral blood mononuclear cells from asthma patients. Thus, these results showed that hUC-MSC treatment can ameliorate asthma by suppressing the asthmogenic cytokine production of effector cells. However, the successful clinical application of MSCs in the future is likely to require careful optimization of the route, dosage, and timing.

• Clinical and Experimental Pediatrics
• /
• v.52 no.7
• /
• pp.824-831
• /
• 2009

Purpose : We aimed to investigate the efficacy of and functional recovery after intracerebral transplantation of different doses of mouse mesenchymal stem cells (mMSCs) in immature rat brain with hypoxic-ischemic encephalopathy (HIE). Methods : Postnatal 7-days-old Sprague-Dawley rats, which had undergone unilateral HI operation, were given stereotaxic intracerebral injections of either vehicle or mMSCs and then tested for locomotory activity in the 2nd, 4th, 6th, and 8th week of the stem cell injection. In the 8th week, Morris water maze test was performed to evaluate the learning and memory dysfunction for a week. Results : In the open field test, no differences were observed in the total distance/the total duration (F=0.412, P=0.745) among the 4 study groups. In the invisible-platform Morris water maze test, significant differences were observed in escape latency (F=380.319, P<0.01) among the 4 groups. The escape latency in the control group significantly differed from that in the high-dose mMSC and/or sham group on training days 2-5 (Scheffe's test, P<0.05) and became prominent with time progression (F=6.034, P<0.01). In spatial probe trial and visible-platform Morris water maze test, no significant improvement was observed in the rats that had undergone transplantation. Conclusion : Although the rats that received a high dose of mMSCs showed significant recovery in the learning-related behavioral test only, our data support that mMSCs may be used as a valuable source to improve outcome in HIE. Further study is necessary to identify the optimal dose that shows maximal efficacy for HIE treatment.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1081-1083
• /
• 2003

The CC's main objective is to manage and control the various operation of the MSC camera. The CC has capability to control the various camera operation modes such as INIT mode, WAIT mode, STANDBY mode, READY IMAGING, DEFAULT READY IMAGING, IBIT and IMAGING mode as well as to manage the interface of the PMU. This paper also shows not only the design concepts in the both of the hardware and the operational software, but also the implementation results for the various CC functions.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.489-492
• /
• 2005

As a former level of MSC(Multi Spectral Camera) telescope of the KOMPSA T2satellite, the several performance tests of EOS(Electro Optical Subsystem) were performed in the EOS level. By these tests, not only the design requirement of payload can be verified but also the test result can be the important criterion to estimate the performance of payload in the launch and space orbit environment. The EOS Geometric Mapping test is to verify the accuracy of the alignment & assembly on the Subsystem of the MSC by measurement like these; LOS(Line of Sight), LOD(Line of Detector), Band to Band Registration, Optical Distortion and Reference Cube. This paper describes the test results and the analysis for the EOS Geometric Mapping.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.12 s.117
• /
• pp.1244-1251
• /
• 2006

The objective of this paper is to get excitation forces of the engine at each of the brackets for the prediction of the vehicle interior noise by the powertrain. A powertrain geometry model is produced by CATIA and its FE model is made by MSC/Patran. A vibration mode analysis and a running mode analysis are experimentally implemented. After getting a satisfied MAC value by doing a correlation about a measured mode analysis value and analyzed value through MSC/Nastran software, all components are assembled through MSC/ADAMS software which is a dynamic analysis tool. We can predict the vibration of brackets which is the last points to occur the force of the engine combustion by analyzing the combustion force produced by engine mechanism.