• Proceedings of the KIEE Conference
• /
• 대한전기학회 2004년도 학술대회 논문집 전문대학교육위원
• /
• pp.80-83
• /
• 2004

Previously, in order to send information from the local controller to the display board, the hardware or software had to be handled and run through 3-phases, which include the PC-card or PC-add Board, I-F card and Sub board. This study will attempt to design a board that handles information by connecting the USB port of the PC directly to the Sub board. In addition, an MPU will be attached to the previously complex hardware circuit to design a software drive engine module, which allows for the development of new products by modifying only the software engine and not the hardware.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 한국산업정보학회 2006년도 춘계 국제학술대회 논문집
• /
• pp.407-410
• /
• 2006

최근 들어 반도체의 기술적인 성장과 네트워크의 발전으로 유비쿼터스 컴퓨팅 환경이 대두되고 있으며 이에 따라 RFID라는 신기술이 등장과 응용에 관한 연구가 활발히 진행되고 있다. 이에 본 논문에서는 기존 RFID 시스템에서 유선망을 사용한 데이터 전송으로 인하여 발생될 수 있는 공간 및 이동성의 제약을 극복하기위하여 저가의 무선전송모듈을 적용하여 휴대형 상품정보제공 시스템을 개발하였다. 무선전송 모듈은 900MHz 대역의 Texas Instruments 사의 TRF6901 chipset을 이용하였고, 이를 제어하는 MPU는 TI사의 MSP430F149로 설계하였다. 본 논문에서 개발한 시스템은 도서관리, 출입통제 시스템등에 범용적으로 적용될 수 있을 뿐 아니라 핸드 헬드형 RFID 시스템에 혁신적인 기대 효과를 예상할 수 있다.

• Journal of Biomedical Engineering Research
• /
• 제17권1호
• /
• pp.129-138
• /
• 1996

This paper describes design techniques of general purpose thermal array printer, especially easily applicable to medical measurement equipment. The'general'means that the proposed thermal array printer can be applied to not only medical field but other industrial field by establishing the eligible protocol. The thermal array printer is composed of i)MPU and its peripherals ii)printer head control, iii)diverse protection circuits, and iv)serial communication. In this paper the performance of the proposed thermal array printer was evaluated by applying to an 3 channel electrocardiogram recorder. The propped system can support'Hangul'text as well as alphanumeric characters and any bitmap image.

• Journal of information and communication convergence engineering
• /
• 제17권3호
• /
• pp.205-212
• /
• 2019

Motion tracking and localization devices are an important building block of motion tracking systems in a virtual reality (VR) environment. This study is about improving the accuracy of motion and location for enhancing user immersion in experience type VR environment to position tracking technique. In this study, we propose and test a design of such a device. The module data test of the attitude and heading reference system shows that the implementation with the MPU-9250 sensor is successful and adequate to be used with short operation time. We consider various sensor hardware dependencies of VR, and compare various correction methods and filtering methods to lower the motion to photon (MTP) time that user movement is fully reflected on the display using sensor devices. The Kalman filter is used to combine the accelerometer with the gyroscope in the sensing unit.

• The KIPS Transactions:PartA
• /
• 제19A권1호
• /
• pp.51-60
• /
• 2012

IC(Integrated circuits)card, generally be named smard card, embedded MPU(Micro Processor Unit) of small-size, memory, EEPROM, Card Operating System(COS) and security algorithm. The IC card is used in almost all industry such as a finance(credit, bank, stock etc.), a traffic, a communication, a medical, a electronic passport, a membership management and etc. Recently, a application field of IC card is on the increase by method for payments of T-commerce, as T-commerce is becoming a new growth engine of the broadcating industry by trend of broadcasting and telecommunication convergence, smart mechanization of TV. For example, we can pay in IC credit card(or IC cash card) on T-Commerce. or we can be provided TV banking service in IC cash card such as ATM. However, so far, T-commerce payment services have weakness in security such as storage and disclosure of card information as well as dropping sharply about custom ease because of taking advantage of card information input method using remote control. To solve this problem, This paper developed processing payment module for implementing TV electronic payment system using IC credit card payment standard, EMV.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국정보통신학회 2017년도 춘계학술대회
• /
• pp.684-685
• /
• 2017

FMCW radar, which is widely used as a front collision warning system for vehicles, is now being commercialized. In this study we develope the radar signal processing system using MPC5775K that is specialized for high performance ADAS. That has special features for ADAS such as 10Msps 12bit ADC, 50MHz Radix-4 FFT, CTE(Cross Triggering Engine) for synchronized triggering between DAC and ADC. The baseband processing board is implemented and shows the result in Matlab.

• International Journal of Aeronautical and Space Sciences
• /
• 제9권2호
• /
• pp.121-128
• /
• 2008

Modularized GPS software defined radio (SDR) has many advantages of applying and modifying algorithm. Hardware based GPS receiver uses many hardware parts (such as RF front, correlators, CPU and other peripherals) that process tracked signal and navigation data to calculate user position, while SDR uses software modules, which run on general purpose CPU platform or embedded DSP. SDR does not have to change hardware part and is not limited by hardware capability when new processing algorithm is applied. The weakness of SDR is that software correlation takes lots of processing time. However, in these days the evolution of processing power of MPU and DSP leads the competitiveness of SDR against the hardware GPS receiver. This paper shows a study of modulization of GPS software platform and it presents development of the GNSS software platform using MATLAB Simulink™. We focus on post processing SDR platform which is usually adapted in research area. The main functions of SDR are GPS signal acquisition, signal tracking, decoding navigation data and calculating stand alone user position from stored data that was down converted and sampled intermediate frequency (IF) data. Each module of SDR platform is categorized by function for applicability for applying for other frequency and GPS signal easily. The developed software platform is tested using stored data which is down-converted and sampled IF data file. The test results present that the software platform calculates user position properly.

• Design & Manufacturing
• /
• 제14권3호
• /
• pp.8-16
• /
• 2020

In this study, the vibration signal of the mold was measured and analyzed to monitoring the process time and characteristics during injection molding. A 5 inch light guide plate mold was used to injection molding and the vibration signal was measured by MPU6050 acceleration sensor module attached the surface of fixed mold base. Conditions except for injection speed and packing pressure were set to the same value and the change of the vibration signal of the mold according to injection speed and packing pressure was analyzed. As a result, the vibration signal had a large change at three points: "Injection start", "V/P switchover", and "Packing end". The time difference between "injection start" and "V/P switchover" means the injection time in the injection molding process, and the time difference between "V/P switchover" and "Packing end" means the packing time. When the injection time and packing time obtained from the vibration signal of the mold are compared with the time recorded in the injection molding machine, the error of the injection time was 2.19±0.69% and the error of the packing time was 1.39±0.83%, which was the same level as the actual value. Additionally, the amplitude at the time of "injection start" increased as the injection speed increased. In "V/P switchover", the amplitude tended to be proportional to the pressure difference between the maximum injection pressure and the packing pressure and the amplitude at the "packing end" tended to the pressure difference between the packing pressure and the back pressure. Therefore, based on the result of this study, the injection time and packing time of each cycle can be monitored by measuring the vibration signal of the mold. Also, it was confirmed that the level and trend of process variables such as the injection speed, maximum injection pressure, and packing pressure can be evaluated as the change of the mold vibration during injection molding.