• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.7
• /
• pp.1071-1077
• /
• 2022

A security SoC that can be used to implement elliptic curve cryptography (ECC) based public-key infrastructures was designed. The security SoC has an architecture in which a hardware accelerator for the elliptic curve digital signature algorithm (ECDSA) is interfaced with the Cortex-A53 CPU using the AXI4-Lite bus. The ECDSA hardware accelerator, which consists of a high-performance ECC processor, a SHA3 hash core, a true random number generator (TRNG), a modular multiplier, BRAM, and control FSM, was designed to perform the high-performance computation of ECDSA signature generation and signature verification with minimal CPU control. The security SoC was implemented in the Zynq UltraScale+ MPSoC device to perform hardware-software co-verification, and it was evaluated that the ECDSA signature generation or signature verification can be achieved about 1,000 times per second at a clock frequency of 150 MHz. The ECDSA hardware accelerator was implemented using hardware resources of 74,630 LUTs, 23,356 flip-flops, 32kb BRAM, and 36 DSP blocks.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10c
• /
• pp.402-405
• /
• 2006

멀티프로세서 환경에서 동작하는 임베디드 시스템을 개발하기 위해서는 소프트웨어 모델분만 아니라 하드웨어 플랫폼에 대한 모델이 필요하다. 이는 개발하고자 하는 소프트웨어가 하드웨어 플랫폼에 어떻게 배치되어 실행할 것인가에 대한 고려가 요구되기 때문이다. 특히 MPSoC(Multiprocessor SoC)에서는 소프트웨어를 배치할 하드웨어 플랫폼에 대한 정보가 필요하기 때문에 설계 과정에서 이들에 대한 모델링이 요구된다. 따라서 본 연구에서는 하드웨어 플랫폼 아키덱처를 정의할 수 있는 이클립스 기반의 플러그인을 개발하고, 이를 이용한 PSM 모델링 방안을 제시한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.04a
• /
• pp.674-677
• /
• 2009

반도체 기술에 발달로 SoC, MPSoC와 같은 기술이 주목을 받고 있다. 이와 함께 soft error의 증가, 설계복잡도와 같은 문제점이 나타나고 있다. 본 논문은 FT_ARM(Fault Tolerant ARM)을 설계하여, soft error에 대응 하고자한다. 또한 오류주입 시뮬레이션을 통해 설계한 FT_ARM의 성능을 비교한다.

• Journal of information and communication convergence engineering
• /
• v.17 no.4
• /
• pp.279-284
• /
• 2019

This paper presents processing-node status-based message scattering and gathering algorithms for multi-processor systems on chip to reduce the communication time between processors. In the message-scattering part of the message-passing interface (MPI) scatter function, data transmissions are ordered according to the proposed linear algorithm, based on the processor status. The MPI hardware unit in the root processing node checks whether each processing node's status is 'free' or 'busy' when an MPI scatter message is received. Then, it first transfers the data to a 'free' processing node, thereby reducing the scattering completion time. In the message-gathering part of the MPI gather function, the data transmissions are ordered according to the proposed linear algorithm, and the gathering is performed. The root node receives data from the processing node that wants to transfer first, and reduces the completion time during the gathering. The experimental results show that the performance of the proposed algorithm increases at a greater rate as the number of processing nodes increases.

• Journal of IKEEE
• /
• v.25 no.1
• /
• pp.156-167
• /
• 2021

In this paper, we propose a digital transceiver unit design for in-building of 5G optical repeaters that extends the coverage of 5G mobile communication network services and connects to a stable wireless network in a building. The digital transceiver unit for driving the proposed 5G optical repeater is composed of 4 blocks: a signal processing unit, an RF transceiver unit, an optical input/output unit, and a clock generation unit. The signal processing unit plays an important role, such as a combination of a basic operation of the CPRI interface, a 4-channel antenna signal, and response to external control commands. It also transmits and receives high-quality IQ data through the JESD204B interface. CFR and DPD blocks operate to protect the power amplifier. The RF transmitter/receiver converts the RF signal received from the antenna to AD, is transmitted to the signal processing unit through the JESD204B interface, and DA converts the digital signal transmitted from the signal processing unit to the JESD204B interface and transmits the RF signal to the antenna. The optical input/output unit converts an electric signal into an optical signal and transmits it, and converts the optical signal into an electric signal and receives it. The clock generator suppresses jitter of the synchronous clock supplied from the CPRI interface of the optical input/output unit, and supplies a stable synchronous clock to the signal processing unit and the RF transceiver. Before CPRI connection, a local clock is supplied to operate in a CPRI connection ready state. XCZU9CG-2FFVC900I of Xilinx's MPSoC series was used to evaluate the accuracy of the digital transceiver unit for driving the 5G optical repeater proposed in this paper, and Vivado 2018.3 was used as the design tool. The 5G optical repeater digital transceiver unit proposed in this paper converts the 5G RF signal input to the ADC into digital and transmits it to the JIG through CPRI and outputs the downlink data signal received from the JIG through the CPRI to the DAC. And evaluated the performance. The experimental results showed that flatness, Return Loss, Channel Power, ACLR, EVM, Frequency Error, etc. exceeded the target set value.

• Journal of information and communication convergence engineering
• /
• v.6 no.2
• /
• pp.122-128
• /
• 2008

Multiprocessor architectures and platforms, such as, a multiprocessor system on chip (MPSoC) recently introduced to extend the applicability of the Moore's law, depend upon concurrency and synchronization in both software and hardware to enhance design productivity and system performance. With the rapidly approaching billion transistors era, some of the main problem in deep sub-micron technologies characterized by gate lengths in the range of 60-90 nm will arise from non scalable wire delays, errors in signal integrity and non-synchronized communication. These problems may be addressed by the use of Network on Chip (NOC) architecture for future System-on-Chip (SoC). We have modeled a concurrent architecture for a customizable and scalable NOC in a system level modeling environment using MLDesigner (from MLD Inc.). Varying network loads under various traffic scenarios were applied to obtain realistic performance metrics. We provide the simulation results for latency as a function of the buffer size. We have abstracted the area results for NOC components from its FPGA implementation. Modeled NOC architecture supports three different levels of quality-of-service (QoS).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.1
• /
• pp.57-64
• /
• 2006

Multiprocessor system on chip (MPSoC) platforms has set a new innovative trend for the SoC design. Quality of service parameters and performance matrix are leading to the adoption of new design methodology for SoC, which will incorporate highly scalable, reusable, predictable, cost and energy efficient platform not only for underlying communication backbone but also for the entire system architecture of NOC. Like the layered architecture for the communication backbone of NOC, we have proposed the entire system architecture for NOC to be a seven layered architecture in itself. Such a platform can separate the domain specific issues which will model concurrency along with the synchronization issues more effectively. For such a layered architecture, model of computation will provide a framework to that can model concurrency and synchronization issues which are natural for any application. Therefore it becomes extremely important to use a right computation model in a specific NOC region.

• The KIPS Transactions:PartD
• /
• v.15D no.1
• /
• pp.87-98
• /
• 2008

In company with the demand of powerful processing units for embedded systems, the method to develop embedded software is also required to support the demand in new approach. In order to improve the resource utilization and system performance, software modeling techniques have to consider the features of hardware architecture. This paper proposes a partitioning technique of UML-based software models, which focus the generation of the allocatable software components into multiprocessor architecture. Our partitioning technique, at first, transforms UML models to CBCFGs(Constraint-Based Control Flow Graphs), and then slices the CBCFGs with consideration of parallelism and data dependency. We believe that our proposition gives practical applicability in the areas of platform specific modeling and performance estimation in model-driven embedded software development.

• Journal of Sensor Science and Technology
• /
• v.32 no.4
• /
• pp.246-251
• /
• 2023

Internet of Things (IoT) systems process signals from various sensors using signal processing algorithms suitable for the signal characteristics. To analyze complex signals, these systems usually use signal processing algorithms in the frequency domain, such as fast Fourier transform (FFT), filtering, and short-time Fourier transform (STFT). In this study, we propose a multi-mode sensor signal processor (SSP) accelerator with an FFT-based hardware design. The FFT processor in the proposed SSP is designed with a radix-2 single-path delay feedback (R2SDF) pipeline architecture for high-speed operation. Moreover, based on this FFT processor, the proposed SSP can perform filtering and STFT operation. The proposed SSP is implemented on a field-programmable gate array (FPGA). By sharing the FFT processor for each algorithm, the required hardware resources are significantly reduced. The proposed SSP is implemented and verified on Xilinxh's Zynq Ultrascale+ MPSoC ZCU104 with 53,591 look-up tables (LUTs), 71,451 flip-flops (FFs), and 44 digital signal processors (DSPs). The FFT, filtering, and STFT algorithm implementations on the proposed SSP achieve 185x average acceleration.

• Journal of KIISE:Computer Systems and Theory
• /
• v.35 no.9_10
• /
• pp.429-440
• /
• 2008

As embedded system becomes more complex, software development becomes more important in the entire design process. Most embedded applications consist of multi -tasks, that are executed in parallel. So, dataflow model that expresses concurrency naturally is preferred than sequential programming language to develop multitask software. For the execution of multitasking codes, operating system is essential to schedule multi-tasks and to deal with the communication between tasks. But, it is needed to execute multitasking code without as when the target hardware platform cannot execute as or target platforms are candidates of design space exploration, because it is very costly to port as for all candidate platforms of DSE. For this reason, we propose the serialized multitasking code generation technique from dataflow specification. In the proposed technique, a task is specified with dataflow model, and generated as a C code. Code generation consists of two steps: First, a block in a task is generated as a separate function. Second, generated functions are scheduled by a multitasking scheduler that is also generated automatically. To make it easy to write customized scheduler manually, the data structure and information of each task are defined. With the preliminary experiment of DivX player, it is confirmed that the generated code from the proposed framework is efficiently and correctly executed on the target system.