• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1482-1484
• /
• 2002

Transparent conductive oxides (TCO) are necessary as front electrode for most thin film solar cell. In our paper, transparent conducting aluminum-doped Zinc oxide films (ZnO:Al) were prepared by rf magnetron sputtering on glass (Corning 1737) substrate as a variation of the deposition condition. After deposition, the smooth ZnO:Al films were etched in diluted HCI (0.5%) to examine the electrical and surface morphology properties as a variation of the time. The most important deposition condition of surface-textured ZnO films by chemical etching is the processing pressure and the substrate temperature. In low pressures (0.9mTorr) and high substrate temperatures $({\leq}300^{\circ}C)$, the surface morphology of films exhibits a more dense and compact film structure with effective light-trapping to apply the silicon thin film solar cells.

• The Korean Journal of Pesticide Science
• /
• v.14 no.2
• /
• pp.138-147
• /
• 2010

Nematicidal activity against pine wood nematode, Bursaphelenchus xylophilus, was tested in the pot and field by the treatment of microbial formulation after media optimization. The optimized media composition was glycerol 10 g, soybean meal 10 g, NaCl 1 g, $CaCO_3$ 2 g, $K_2HPO_4$ 0.125 g per liter and microbial complex formulation was made with liquid and powder type. Most effective antibiotics against symbiotic microorganism with nematode, kanamycin, was added to the formulation. The control effects against pine wood nematodes were checked by pot test and field test. In the result of treatment by trunk injection, five times treatment was more effective than one time and the treatment with the formulation of concentrated culture supernatant was the most effective in the nematicidal activity showing below 10% mortality in pine tree.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.863-867
• /
• 2008

Value Engineering is one of the most effective too13 to achieve the required cost and time reduction, quality and safety improvement. The role and importance of design value engineering is expected to be high, so the research is needed for its effective accomplishment. Therefore, in this research we have suggested the method of checklist development for the effective accomplishment of design value engineering work. Also, the way of development is that derives major elements from drawing information category and from the base of the derived elements, the research lists up the checklist items. At last, it developed design value engineering checklist based the item that listed up throughout the experts.

• Journal of Information Technology Applications and Management
• /
• v.15 no.3
• /
• pp.91-110
• /
• 2008

Trust is emphasized as one of the most important factors in various e-commerce related studies. It is no exaggeration to say that in the area of e-commerce, trust-building with customers determines a company's success or failure. That is why most e-commerce based companies spare no time and effort in building trust with customers. Without exception, trust is one of the most critical factors influencing a customer's decision making process of whether to purchase Internet automobile insurance. This study attempts to provide useful guidelines for the sales-enhancing strategies of Internet automobile insurers, by delving into research questions concerning 1) gender differences in Internet automobile insurance customers' recognition of trust, and 2) gender differences in the effective trust factors influencing one's intention to purchase of Internet automobile insurance. The study finds that while the shape of trust-recognition toward three types of trust factors is very similar for both gender groups, the intensity of trust for each gender group in overall is pretty different. The results indicate that there exist gender differences in the trust factors influencing one’s intent to purchase Internet automobile insurance. The results of this study will provide useful guidelines for Internet automobile insurers in establishing effective and differentiated marketing strategies.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.149-152
• /
• 1999

Computer-Aided Engineering (CAE) is one of the most effective method in design of golf clubs for determination of optimum shapes in short lead time. A new design of golf club drive with gas-filled titanium head has been carried out using two FEM softwares MARC and DYNA-3D. The main research work focuses on the decision of face thickness and the effect of filled gas pressure by analyzing the change of the kinematic energy of the ball during impact.

• Earthquakes and Structures
• /
• v.12 no.5
• /
• pp.515-527
• /
• 2017

Recently, Friction dampers become popular due to the desirable performance in the energy dissipation of lateral loads. A lot of research which has been conducted on these dampers results in developing friction dampers with low sensitivity to the number of cycles and temperature increases. Friction dampers impose high residual drifts to the buildings because of low post-yield stiffness of the damper which results from increasing lateral displacement and period of buildings. This issue can be more critical under strong aftershocks which results in increasing of structural damages. In this paper, in addition to the assessment of aftershock on steel buildings equipped with friction dampers, methods for controlling residual drifts and decreasing the costs of retrofitting are investigated. Utilizing rigid connections as a lateral dual system and activating lateral stiffness of gravity columns by adding elastic braces are as an example of effective methods investigated in this research. The results of nonlinear time history analyses on the low to medium rise steel frames equipped with friction dampers illustrate a rise in residual drifts as the result of aftershocks. In addition, the results show that different slip loads of friction damper can affect the residual drifts. Furthermore, elastic stories in comparison to rigid connections can reduce residual drifts of buildings in an effective fashion, when most slip loads of friction dampers are considered.

• ETRI Journal
• /
• v.39 no.2
• /
• pp.222-233
• /
• 2017

Debugging in distributed environments, such as wireless sensor networks (WSNs), which consist of sensor nodes with limited resources, is an iterative and occasionally laborious process for programmers. In sensor networks, it is not easy to find unintended bugs that arise during development and deployment, and that are due to a lack of visibility into the nodes and a dearth of effective debugging tools. Most sensor network debugging tools are not provided with effective facilities such as real-time tracing, remote debugging, or a GUI environment. In this paper, we present a hybrid debugging framework (HDF) that works on WSNs. This framework supports query-based monitoring and real-time tracing on sensor nodes. The monitoring supports commands to manage/control the deployed nodes, and provides new debug commands. To do so, we devised a debugging device called a Docking Debug-Box (D2-Box), and two program agents. In addition, we provide a scalable node monitor to enable all deployed nodes for viewing. To transmit and collect their data or information reliably, all nodes are connected using a scalable node monitor applied through the Internet. Therefore, the suggested framework in theory does not increase the network traffic for debugging on WSNs, and the traffic complexity is nearly O(1).

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.5
• /
• pp.866-872
• /
• 2010

This study investigates the methods of the natural dyeing of silk fabrics with Machilus thunbergii cortex extract. After the dyeing of silk with a Machilus thunbergii cortex extract, the dyeability of the Machilus thunbergii cortex extract was evaluated with the dyeing time, concentration, temperature, the numbers of repeated dyeing, the pH of the dyebath, the changes of the K/S value, and surface colors by the methods of mordanting and color fastness. The effective dyeing conditions with silk fabrics were at a concentration of 120g/L, the dyeing temperature at $80^{\circ}C$, and the dyeing time for one hour ten minutes. The effective number of repeated dyeing was three times. The dyeing operation was carried out in a neutral dyebath of pH 7. The K/S value was higher in most of the pre-mordants (except the Sn mordant) and a high K/S value was shown in the copper pre-mordant. The colors of the silk fabrics with Machilus thunbergii cortex were of various brown shades. The color difference was distinct when using the Fe-mordant and the colorfastness of all the dyed samples was low; however, the dry cleaning fastness was excellent at the 4-5 grade.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.11
• /
• pp.22-35
• /
• 1999

The block assembly process takes more than half of the total shipbuilding processes. Therefore, it is very important to have a practically useful block assembly process planning system which can build plans of maximum efficiency with minimum man-hours required. However, the process plans are often not readily executable in the assembly shops due to severe imbalance of workloads. This problem arises because the process planning is done on block by block basis in current practice without paying any attention to the load distribution among the assembly shops. this paper presents the development of an automated hull block assembly process planning system which results in the most effective use of production resources and also produces plans that enable efficient time management. If the load balance of assembly shops is to be considered at the time of process planning, the task becomes complicated because of the increased computational complexity. To solve this problem, a new approach is adopted in this research in which the load balancing function and process planning function are iterated alternately providing to each other contexts for subsequent improvement. The result of case study with the data supplied from the shipyard shows that the system developed in this research is very effective and useful.

• Journal of Plant Biotechnology
• /
• v.6 no.2
• /
• pp.107-111
• /
• 2004

To establish an efficient acclimation system for regenerated plantlets of soybean, we used various media with hydroponic nutrient solutions before regenerants were transplanted into soil. The hydroponic nutrient solution was essential for the survival of the plantlets. The vermiculite with nutrient solution at pH 5.5 was found to be the best medium with 97-100% survival rate and better growth of regenerants plantlets. Regeneraed grew best in the following order of solutions: Yoshida solution, modified Yoshida solution, SoyI, Soy II, and MS medium. However, Soy I solution (EC 2.9 mS/cm), developed by the Honam Agricultural Research Institute proved to be the most effective for acclimation in terms of the time required for vigorous growth and economical use of chemicals.