• 한국환경과학회지
• /
• 제22권10호
• /
• pp.1353-1361
• /
• 2013

The objectives of this paper are the characterization of the pretreatment of wastewater by microfiltration (MF) membranes for river maintenance and water recycling. This is done by investigation of the proper coagulation conditions, such as the types and doses of coagulants, mixing conditions (velocity gradients and mixing periods), pH, etc., using jar tests. The effluent water from a pore control fiber (PCF) filter located after the secondary clarifier at Kang-byeon Sewage Treatment Plant (K-STP) was used in these experiments. Two established coagulants, aluminum sulfate (Alum) and poly aluminum chloride (PAC), which are commonly used in sewage treatment plants to treat drinking water, were used in this research. The results indicate that the optimal coagulation velocity gradients (G) and agitation period (T) for both Alum and PAC were 200-250 $s^{-1}$ and 5 min respectively, but the coagulation efficiencies for both Alum and PAC were lower at low values of G and T. For a 60 min filtration period on the MF, the flux efficiencies ($J/J_0$ (%)) at the K-STP effluent that were coagulated by PAC and Alum were 92.9 % and 79.9 %, respectively, under the same coagulation conditions. It is concluded that an enhanced membrane process is possible by effective filtration of effluent at the K-STP using the coagulation-membrane separation process.

• 한국식품저장유통학회지
• /
• 제7권3호
• /
• pp.241-244
• /
• 2000

포도 저장중의 가장 큰 문젯점인 부패과 발생을 경감시키기 위하여 acetic acid를 'Campbell Early'와 'Sheridan'품종에 훈증처리하여 그 효과를 조사하였다. 그 결과 포도과실의 탈립정도는 acetic acid를 훈증처리한 후 저장 90일에 두 품종 모두 1.0~1.5%로 나타나 무처리의 2.9~8.0%와 비교하여 탈립억제 효과가 인정되었다. 부패과립은 acetic acid 훈증처리구의 경우 저장 90일에 과방당 0.7~2.9% 발생되어 무처리구의 8.3~27.6%와 비교하여 현저하게 감소되었고, PDA배지상에서 병원균의 생장유무를 관찰할 결과 병발생이 없어, acetic acid 훈증처리가 병발생 억제에 효과적이었다.

• 한국응용과학기술학회지
• /
• 제20권2호
• /
• pp.165-172
• /
• 2003

Fireproofing polyolefin nanocomposite for the application of power distributing panel was prepared by compounding linear low density polyethylene(LLDPE), decabromodiphenyl oxide (DBDPO), $Sb_2O_3$ as flame retardant agents, and modified nano clay as filler. The optimized formulation ratio of compounds to prepare the fireproofing polyolefin nanocomposite was obtained. The flame retardant properties for nanocomposite prepared by compounding 22.5 phr of nano clay and 18 phr of DBDPO based on 100 phr of LLDPE were shown that the combustion time. 10${\sim}$18 s, combustion distance, 12${\sim}$15 mm and non-melt dropping characteristics. In particular. the content of DBDPO in nanocomposite could be decreased to 18 phr from 40 phr DBDPO for fireproofing composite containing 30 phr of clay. The electrical properties measured from tracking test, had an excellent antitracking properties by not showing the phenomenon of leakage current and sparking.

• Elastomers and Composites
• /
• 제55권1호
• /
• pp.46-50
• /
• 2020

Material extrusion (ME)-type 3D printing is the most popular among the 3D printing processes. In this study, the cross-section morphologies of ME-type 3D printing manufactured specimens were observed with respect to the thermal properties of the material. The cross-section morphology of a specimen is related to the deposition strength, and the outside profile of the cross-section is related to the surface roughness. The filaments used in this study, with different thermal conductivities, were the acrylonitrile-butadiene-styrene (ABS), the high impact polystyrene (HIPS), the glycol-modified polyethylene terephthalate (PETG), and the polylactic acid (PLA). The cross-sections and the surfaces of the 3D manufactured specimens were examined. In ME-type 3D printing, the filaments are extruded through a nozzle and they form a layer. These layers rapidly solidify and as a result, they become a product. The thermal conductivity of the material influences the cooling and solidification of the layers, and subsequently the cross-section morphology and the surface roughness.

• Journal of Pharmaceutical Investigation
• /
• 제34권2호
• /
• pp.125-130
• /
• 2004

Paclitaxel is an effective antineoplastic drug for various cancers especially ovarian and breast cancer. This study is to find the optimum condition for the preparation of nanoemulsions and to improve the stability and loading amount of paclitaxel in nanoemulsions. Nanoemulsions were prepared by modified spontaneous emulsification solvent diffusion method. It was composed of phosphatidylcholine:cholesterol:1,2-Distearoyl-sn-Glycero-3-Phosphoethanolamine-N-[Metoxy (Polyethylene glycol)-2000]:paclitaxel at a weight ratio of 5:3:1:1 and the Tween 80 as a surfactant. The particle size and the shape of nanoemulsions were measured by particle analyzer and SEM, respectively. The loading amount of paclitaxel in nanoemulsion was measured by UV-visible spectroscopy at 227 nm. The particle sizes were $80{\sim}120\;nm$ and the loading efficiency of paclitaxel was $8{\sim}39%$. The optimum conditions for the preparation of nanoemulsions were 8% w/w phospholipid, 16% w/v Tween 80 and 2% w/w paclitaxel, respectively.

• 한국식품저장유통학회지
• /
• 제1권1호
• /
• pp.15-20
• /
• 1994

This experiment was carried out to select the optimum thickness of polyethylene film for the nonastringency of astringent persimmon fruits during modified atmosphere(MA) storage of Cheongdo Bansi kept at 0$^{\circ}C$. The experimental plots were divided into 5 plots by film thickness(0.08, 0.10, 0.12, 0.14 and 0.16mm). The experimental items were the changes in concentration of CO2 and O2 in film brig, soluble tannin contents, loss of weight firmness and external appearance of fruits. The nonastringency of persimmon fruits can be achieved all groups excepting the 0.08mm film during MA storage. The sweet persimmon in film bag of 0.10 and 0.12mm maintained a high quality and firmness, but following the deastringency the fruits in 0.14 and 0.16mm developed off-color. The increasing of carbon dioxide level and decreasing of oxygen level in film bag created anaerobic condition at earth stage, and then it kept a constant level during stooge. According to film thickness the obvious difference in the change of soluble tannin contents external appearance and firmness were observed. It could be concluded that the optimum thickness of film for the desirable nonastringency on Cheongdo Bansi was 0.10mm.

• 한국식품과학회지
• /
• 제44권5호
• /
• pp.559-567
• /
• 2012

신선편이 포도 상품의 유통, 판매 중 부패억제 및 품질유지를 위한 환경기체조절포장기법의 활용 가능성을 확인하고자 살균소독, 세척, 절단 과정을 거친 캠벨 포도 시료에 대해 다양한 기체 충진 조건을 적용하여 플라스틱 포장용기에 밀봉한 후 $5^{\circ}C$에 저장하면서 품질변화를 살펴보았다. 고이산화탄소 조건에서 포도의 호흡률은 일반 대기조성에서의 호흡률과 크게 다르지 않았으나, 고산소 조건에서는 산소 소모율이 2배 정도 증가하는 비정상적인 호기호흡이 일어났다. 저온저장 중 포장 내부의 기체조성은 초기 기체충진 조건에 관계없이 $O_2$가 모두 소비되고 고농도의 $CO_2$가 축적되었으나, PE 포장구에서는 약 13% 이상의 $O_2$가 유지되었다. 포도의 품질인자 가운데 생체중량은 대조구인 통기 포장구에서만 1.0% 이상 감소하였고 고산소 처리구에서 가장 낮은 중량감소를 나타내었으며, 과육의 pH, 산도, 가용성 고형분 함량 및 경도, 과피 표면색, 폴리페놀 함량, PPO 활성에서는 기체충진 조건에 의한 유의적 차이를 구분할 수 없었다. 한편 고이산화탄소 처리구에서는 약 $10^1-10^2$ CFU/g 수준의 가장 낮은 미생물 균수를 나타내었으나 저장말기에 이취가 강하게 발생하였고, 고산소 처리구에서는 상대적으로 이취가 적고, 고유의 포도향이 유지되면서 관능검사 평가점수가 다소 높게 나타났다. 결론적으로 적정 농도의 고이산화탄소와 고산소를 병용한 환경기체조절포장은 신선편이 포도의 저장유통 중 품질유지에 효과적임을 확인할 수 있었지만, 최적의 포장조건을 찾기 위해서는 향후 추가적인 연구가 필요하다고 판단된다.

• 한국식품과학회지
• /
• 제18권2호
• /
• pp.130-136
• /
• 1986

'신고' 품종의 배를 두께가 다른$(0.04{\sim}0.08mm)$ 폴리에틸렌 필름으로 밀봉하여 KAIST 제작 농가용 저장고에서 MA저장 가능성을 검토하였다. 저장 5개월 동안에 저장고 내의 온도는 $0{\sim}7^{\circ}C$ 범위에서 상대습도는 $86{\sim}89%$가 유지되었다. 저장기간중 포장 내의 산소농도는 $5{\sim}14%$, 이산화탄소 농도는 $3{\sim}5%$ 범위에서 변화되었다. 배의 부패율은 $1.5{\sim}3.0%$로 포장구와 '비포장구간에 차이가 별로 없었으나 중량감소의 경우 비포장구는 저장 5재월 만에 4.1%까지 중량이 감소되어 위조현상이 나타났고 필름 포장구의 배는 중량감소가 약 1%밖에 발생하지 않아서 외관상 좋은 품질이 유지되었다. 한편, 관능경사 결과 0.07mm 두께의 필름으로 포장되었던 배가 풍미, 조직감, 다즙성 면에서 가장 높은 선호도를 나타냈는데 이는 당도가 가장 높고 산도가 가장 낮았던데 기인한 듯하다. 저장기간이 경과함에 따라 과육의 경도는 계속 감소하는 경향을 보였으며 섬유소 가수분해효소의 활성은 증가되었는데 과일 경도의 감소와는 밀접한 상관관계(상관계수는 -0.946)를 나타내었다. 과일의 세포벽은 점차적인 붕괴현상을 나타내었는데 이는 섬유소 가수분해효소가 작용한 것으로 판단된다.

• Journal of Biosystems Engineering
• /
• 제41권2호
• /
• pp.98-107
• /
• 2016

Purpose: The aim of this study was to find an appropriate polymer film, which could reduce the water condensation for pallet-size modified atmosphere packaging (MAP). Methods: Five different types of films were selected from several commercialized films. Prior to the real food storage test, plastic boxes with wetted plastic balls were used to simulate the high humidity conditions of real food storage. The initial MAP condition was 5% oxygen and 95% nitrogen, and the $O_2$ concentration, the relative humidity and water condensation inside the films were checked on a daily basis. The MAP test for tomatoes was conducted by using the most appropriate film from the five films examined in this study. Results: Every film except Mosspack(R) indicated a similar variation in the $O_2$ concentration over the course of time. The relative humidity near the surfaces of all the films except nylon-6 approached saturation conditions over time. For three kinds of films, namely, low-density polyethylene (LDPE) film, anti-fogging oriented polypropylene (AFOPP) film, and Mosspack(R), the inner surfaces of the films were fully covered with dew after a storage period of a day. Conversely, an area of 4.5% was covered with dew in the case of the poly lactic acid (PLA) film, and there was no dew inside the nylon-6 film. The pallet-size MAP test for tomatoes was conducted by using the nylon-6 film and there was no water condensation inside the nylon-6 film over three weeks of storage. Conclusions: During the pallet scale MAP, water condensation could cause severe fungal infection and wetting of the corrugated box. Hence, it was important to minimize water condensation. This study showed that the MAP films with high WVTR such as nylon-6 and PLA could reduce the water condensation inside the pallet scale MAP.

• 한국식품저장유통학회지
• /
• 제15권2호
• /
• pp.225-230
• /
• 2008

떫은감(Diospyros kaki T.)의 탈삽과 저장 병용 MAP 조건을 설정하기 위하여, '밀양반시'를 0.08 mm, 0.10 mm 또는 0.12 mm 두께의 LDPE 필름으로 열접착 밀봉포장하고 $0^{\circ}C$에서 100일간 저장하면서 포장 내부의 기체조성과 과실의 품질특성을 조사하였다. 포장 내부의 산소와 이 산화탄소농도는 경시적으로 각각 낮아지고 높아져 저장 10일 후 평형상태에 도달하였고, 평형농도는 포장재가 두꺼울수록 산소는 낮고 이산화탄소는 높은 경향을 나타내었다. 과실의 중량감소율은 포장재 두께의 영향이 없이 극미한 값을 보였다. 가용성 탄닌 함량은 포장재가 두꺼울수록 감소가 빠르게 진행되어서, 삽미가 0.10 mm 포장구는 80일경 에 0.12 mm 포장구는 $60{\sim}70$일경에 제거되었으나 0.08 mm 포장구는 저장말기까지 잔존하였다. 과육경도는 0.12 mm 포장구보다 0.08 mm와 0.10 mm 포장구에서 감소가 억제되었다. 외관은 0.12 mm 포장구보다 0.08 mm와 0.10 mm 포장구가 장기간 양호한 상태를 유지하였다. 이로써 MAP는 '밀양반시'의 탈삽과 품질유지에 유용하며, 0.10 mm 두께의 포장재가 적합한 것으로 판단되었다.