• 공업화학
• /
• 제27권6호
• /
• pp.599-605
• /
• 2016

최근 효과적인 암 치료 방법으로 광역학치료(photodynamic therapy)와 광열치료(photothermal therapy)가 주목받고 있다. 본 연구에서는 광열치료에 필요한 광열인자로써의 역할을 할 수 있는 골드 나노로드(AuNR)를 합성하고, 그 표면에 광역학치료를 위한 광증감제(photosensitizer)를 결합하였다. 즉, 골드 나노로드를 체내에 오래 머무르도록 하기 위해 PEG(polyethylene glycol) 및 효과적인 암 표적지향성을 위해 FA (folic acid) 리간드를 도입하였고, FA-PEG와 poly-${\beta}$-benzyl-L-aspartate (PBLA)로 이루어진 블록 공중합체를 3,4-dihydroxy hydrocinnamic acid (HCA) linker를 사용하여 골드 나노로드의 표면개질을 하였다. 또한 $AgNO_3$의 feeding ratio 변화를 통해 다양한 aspect ratio를 갖는 골드 나노로드를 합성하였고, UV-visible spectrophotometer, $^1H$-NMR, XPS, TEM 분석을 통해 FA-PEG-$P(Asp)_{50}$-HCA-AuNR100의 물리 화학적 특성과 morphology를 분석하였고, 성공적인 표면 개질을 확인할 수 있었다. 골드 나노로드의 표면 개질을 통한 생체 적합성 약물전달체의 합성은 효과적인 암 진단 및 다양한 광역학/광열치료 분야에 응용이 될 수 있을 것으로 기대된다.

• Tribology and Lubricants
• /
• 제39권6호
• /
• pp.235-243
• /
• 2023

This paper presents the fabrication process of water-lubricated plastic bearings. Plastic bearings require good mechanical properties and tribological properties as well as elasticity and shock resistance, especially when lubricated in dirty water conditions. In this study, sleeve-type plastic bearings are produced by winding a prepreg sheet, which primary contains nitrile rubber (NBR)-modified epoxy, self-lubricating fillers, and various types of lattice-structured reinforcing fibers such as carbon, Aramid, and polyethylene terephthalate. A thermosetting epoxy is chemically modified with NBR to impart elasticity and low-friction characteristics in water conditions. Experimental investigations are conducted to examine the mechanical and tribological characteristics of the developed bearing materials, and the results are compared with the characteristics of a commercial plastic bearing (Thordon SXL), well known as a water-lubricated bearing. A Thordon bearing (mainly composed of polyurethane) exhibits an extremely low load-bearing capacity and is thus only suitable for medium loading (1~10MPa). The tribological characteristics of the test materials are evaluated through Falex block-on-ring (LFW-1) friction and wear tests. The results indicate that friction exhibited by the carbon-fiber-reinforced NBR-10wt.%-modified epoxy composite material, incorporated with the addition of 20wt.% UHMWPE and 6wt.% paraffin wax, is lower than that of the Thorden bearings, whereas its wear resistance surpass that of Thorden ones. Because of these features, the load carrying capacity of the fabricated composite (>10MPa) is higher than that of the Thorden bearings. These results confirm the applicability of water-lubricated plastic bearing materials developed in this study.

• 한국포장학회지
• /
• 제26권1호
• /
• pp.19-23
• /
• 2020

Al-laminated packaging film incorporating ascorbic acid or tocopherol at inner food contact layer was tested in the potential to improve antioxidative preservation of powdered infant formula under CO₂-enriched atmosphere. Product of 200 g was packaged with the packaging film containing 0.3% antioxidant in sealant layer of low density polyethylene and stored at 30℃ for 286 days with periodic measurement of package atmosphere and product's quality attributes. The CO₂-flushed package resulted in shrinkage of tight contact between the product and the film not allowing gas sampling of package atmosphere after 140 days. Package of tocopherol-incorporated film allowed some ingress of oxygen after 112 days presumably due to its weakening of heat-seal area. The increased oxygen concentration in the tocopherol-added film package led to the concomitant increase of peroxide value, an index of lipid oxidation. On the other hand, packaging of ascorbic acid-added film pouch could suppress lipid oxidation marginally in consistent manner compared to control package without any antioxidant.

• 한국포장학회지
• /
• 제16권2_3호
• /
• pp.59-65
• /
• 2010

Starch was modified with epichlorohydrin(ECH) to improve the miscibility with LDPE and LLDPE. Native starch or epichlorohydrin treated starch was mixed with grycerol and LDPE/LLDPE resin using a kneader and extruded using a single screw extruder to make pallets. The pallets were compression-molded at 145 into composite boards to evaluate their color, oxygen permeation, mechanical and thermal properties, and degradability under UV irradiation. Sheets with epichlorohydrin treated starch generally showed higher L-value than that of native starch blend sheets. The hunter b-values in both native starch blends and epichlorohydrin treated starch blends increased with Increasing starch contents. Tensile strength and percent elongation of sheets decreased with increasing starch contents. Tensile strength and percent elongation of sheets decreased with increasing starch contents. The degradability of blends under UV radiation increased with increasing starch contents in both blend types. The results represents that crosslinking of starch with epichlorohydrin may be a good method to improve miscibility of starch with petroleum-based materials.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1989년도 춘계학술대회
• /
• pp.1-3
• /
• 1989

We have treated polymer surfaces such as polyethylene, polystyrene and polyester by various physicochemical and biological surface modification methods to be suitable for cell adhesion. The physicochemical methods we used were $O_2$ plasma discharge, corona discharge, sulfuric acid and chloric acid treatments. For the biological treatments, blood proteins such as plasma protein, serum protein and fibronectin were adsorbed onto the polymer surfaces. Chinese Hamster Ovary (CHO) cells were cultured on the surface-modified polymers and the cell-compatibility of those surfaces were compared. The chloric acid and fibronectin treatments were found to be the best methods of rendering the polymer surfaces adhesive for CHO cells.

• 한국식품저장유통학회:학술대회논문집
• /
• 한국식품저장유통학회 2003년도 제23차 추계총회 및 국제학술심포지움
• /
• pp.192.1-192
• /
• 2003

The aim of this study was to develop a model that could be used in the design of modified atmosphere packaging (MAP) for Mandarin oranges. Respiratory data at 5, 10, 20$^{\circ}C$ for mandarin oranges were gathered and altered for create useful respiration model. The maximum rate of oxygen uptake increased with increasing temperature. The packaging materials were conventional low density polyethylene and polypropylene with anti-fog, and anti-fungi treatments, and thickness was 30 $\mu\textrm{m}$ and 50 $\mu\textrm{m}$. Permeability tests were performed to find their oxygen, carbon dioxide, water vapor transmission rate as increases in temperature. Test results were then converted to logarithm format for MAP modeling. Optimum gas composition in the package system for fruits were set according to literature and upper or lower limits of oxygen and dioxide established. To predict gas composition at certain storage time, weight of fruits, film thickness, film type, and other variables, respiration rate was studied at various storage conditions. The validity of the model was tested experimentally by observing actual atmospheric changes inside packages. It is concluded that the strategy developed is of use in designing dynamic gas exchange MAP systems, and also has potential uses in similar agricultural products.

• Preventive Nutrition and Food Science
• /
• 제12권4호
• /
• pp.222-228
• /
• 2007

This study was conducted to investigate the minimization of off-flavor occurrence and the maintenance of high quality in modified atmosphere packaged Pleurotus ostreatus during the storage. There are 4 treatments used to preserve high quality and for deodorization of MAP mushroom: Artemisia princeps, Artemisia capillaries, green tea and activated charcoal. The mushrooms were packed in polyethylene film with each treatment and were stored at 5 and $20^{circ}C$. No difference was observed in weight loss, $CO_2\;and\;O_2$ concentration, or color of mushrooms packed with or without treatment. However, the principal component analysis (PCA), electronic nose, revealed differences in off-flavor occurrence between control (MAP mushroom without treatment) and treatment groups at $5^{\circ}C$. This result suggested that Artemisia princeps and Artemisia capillaries was masking the off-flavor in MAP mushroom because the unique flavor of them was strongly revealed and green tea and activated charcoal might have a role of removing the off-flavor by adsorbing ethanol and acetaldehyde, which is known to cause off-flavor. The sensory test showed that Artemisia princeps and Artemisia capillaries dough treatment inhibited microbial growth.

• 한국식품조리과학회지
• /
• 제16권6호
• /
• pp.577-583
• /
• 2000

신선편의화된 신고배를 이용하여 연구를 수행한 결과 처리구 중에서 1% NaCl과 0.2% L-cysteine 용액에 1분간 처리한 절단배의 색도가 가장 적게 변화하였으며, 1% CaCl, 용액처리한 것이 가장 높은 경도를 나타내었다. Vitamin C의 함량은 초기 3.7mg%에서 저장 후에는 무처리구가 1.6mg%로 가장 많이 감소하였으며, 나머지는 처리구간 큰 차이가 없이 모두 2.3-2.9mg%의 범위를 유지하였다. 관능평가 결과 사각거림이나 다즙성, 풍미에 있어서는 큰 차이가 없었으나 외관에 있어서는 0.2% L-cysteine 처리구, 전체적 기호도에서는 1% NaCl 처리구가 각각 높은 선호도를 나타내었다. 신선편의 식품화를 위하여 배추를 절단한 후 저장수명과 품질변화를 관찰한 결과 4$^{\circ}C$에서 1% CaCl$_2$ 처리구와 1% NaCl처리구의 저장수명이 가장 길었으며 전반적인 외관의 유지효과 역시 2$0^{\circ}C$와 4$^{\circ}C$ 모두 1% CaCl$_2$처리구가 대조구와 다른 처리구들에 비하여 줄기절단 부위에 약간의 갈변 발생을 제외하고는 외관이 가장 좋았고, fiber함량, 색도, 산도 등의 생화학적인 변화에 있어서도 역시 다른 처리구에 비하여 효과가 우수하였다. 느타리버섯의 MAP조건은 포장재질, 두께 및 저장온도에 따라 저장수명의 큰 차이를 보여주었다. 포장두께는 사용한 creamic, polypropylene 및 polyethylene film 모두 60$\mu\textrm{m}$ 두께에서 가장 높은 저장수명을, 포장재질로는 polyethylene film이 2$0^{\circ}C$에서 30-50%, $0^{\circ}C$에서 30-125% 증가된 저장수명을 보여주었다. Polyethylene flim을 이용해 버섯의 고품질 유지기간의 연장을 위한 시도로 사용된 potassium permanganate와 SO$_2$발생 처리는 potassium permanganate 처리구가 30-50%, SO$_2$, 발생 처리구는 50-78%의 저장수명 연장 효과를 보여주었다. MA저장시 기체조성은 느타리버섯의 경우 $CO_2$ 10.2-11.6%, $O_2$ 1.2-l.9%, 표고버섯은 $CO_2$, 10.8-16.7%, $O_2$ 1.1-1.9%를 나타내었다.

• Membrane and Water Treatment
• /
• 제6권5호
• /
• pp.379-392
• /
• 2015

Polyvinyl chloride (PVC) ultrafiltration membrane was prepared by blending 12 wt.% of PVC in N, N-dimethylacetimide (DMAc) with polyethylene glycol 400 (PEG400) as an additive. The influence of PEG400 concentration on the PVC membrane morphology, permeability, fouling and rejection were investigated. Fouling and rejection of the PVC membrane were characterized by dextran T-100 filtration. The results showed that membrane water flux was increased up to $682Lm^{-2}h^{-1}$ when 28 wt.% of PEG400 was added into the PVC membrane solution. The best membrane performance with a low fouling and a high selectivity was achieved by adding 12 wt.% concentration of PEG400, which resulted in 90% rejection of dextran and 90% of flux recovery ratio. At further addition of PEG400 concentration, irreversible fouling was starting to increase. A 90% of irreversible fouling was formed in the PVC membrane when more than 22 wt.% of PEG400 is added.

• Korean Membrane Journal
• /
• 제7권1호
• /
• pp.19-27
• /
• 2005

PP hollow fiber membrane was hydrophilized by EVOH dip coating followed by low temperature plasma treatment and UV irradiation. EVOH coating attained high water flux without any prewetting but its stability did not guaranteed at high water permeation rate. At high water permeation rate, water flux declined gradually due to swelling and delamination of the EVOH coating layer causing pore blocking effect. However, plasma treatment reduces the swelling, which suppress delamination of the EVOH coating layer from PP support result in relieving the flux decline. Also, UV irradiation helped the crosslinking of the EVOH coating layer to enhance the performance at low water permeation rate. FT-IR and ESCA analyses reveal that EVOH dip coating performed homogeneously through not only membrane surface but also matrix. Thermogram of EVOH film modified plasma treatment and W irradiation show that crosslinking density of EVOH layer increased. Chemical modification by plasma treatment and UV irradiation stabilized the hydrophilic coating layer to increase the critical flux of the submerged membrane.