• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.336-342
• /
• 2017

Recently, there has been an increasing need for underwater communication systems to monitor ocean environments and prevent marine disasters, as well as to secure ocean resources. Most underwater communication systems adopted acoustic communication with a consideration of attenuation, absorption, and scattering in conductive sea water, and developed fully digital modems based on processors. In this study, a digital up converter (DUC) and a digital down converter (DDC) was developed for an underwater basestation based on underwater acoustic communication systems. Because one of the most important issues in underwater acoustic communication systems is low power consumption due to environmental problems, this study developed a specific hardware module for DUC and DDC. It supported four links of underwater acoustic communication systems and converted the sampling rate and frequency. The systemwas designed and verified using Verilog-HDL in ModelSim environment with the test data generated from baseband layer parts for an underwater base station.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.359-362
• /
• 2001

Analog communication systems using AM, FM modem have been developed. Digital communication systems using digital modems, which is by expansion of digital hardware skill have been recently developed. In order to accomplish a reliable communication it is important to overcome ocean environmental channel characteristics such as transmission loss, ambient noise and multipath effect etc. Specially, the effect of multipath is the most important element that determines the performance of underwater communication system in shallow water. Multipath channel can be divided a vertical and horizontal channel. the former is defined the channel to have large path-delay times between a direct wave and reflected waves. The latter shows relatively small path-delay times between a direct and reflected waves in compared with a vertical channel. In this paper, The performance of FSK, PSK and DPSK modem with respect to the vertical and horizontal multipath communication channels it described and compared.

• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.2
• /
• pp.259-268
• /
• 2016

KEPCO installed AMI (Advanced Metering Infrastructure) metering system for low-voltage customers from 2008. AMI metering system of KEPCO has operated 2.55 million customers and will plan to operate 22 million customers until 2020. KEPCO developed AMI NMS (Network Management System) to operate the meter reading network efficiently. NMS monitors the network status of DCUs (Data Concentration Unit) and modems. NMS provides functionalities of data collection and analysis. It collects property data of network device, network topology information, communication performance information, fault information, and etc. It analyzes collected data and controls network devices by remote access. AMI NMS collects about 370 MIBs (Mangement Information Bases) using SNMP (Simple Network Management Protocol). This paper introduces main functionalities, designed context, and implemented service screen.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.2A
• /
• pp.114-121
• /
• 2005

In this paper, Pipelined A/D converter with multi SHA structure is proposed for high speed operation. The proposed structure incorporates a multi SHA block that consists of multiple SHAs of identical characteristics in parallel to improve the conversion speed. The designed multi SHA is operated by non-overlapping clocks and the sampling speed can be improved by increasing the number of multiplexed SHAs. Pipelined A/D converter, applying the proposed structure, is designed to satisfy requirement of analog front-end of VDSL modem. The measured INL and DNL of designed A/D converter are $0.52LSB{\sim}-0.50LSB\;and\;0.80LSB{\sim}-0.76LSB$, respectively. It satisfies the design specifications for VDSL modems. The simulated SNR is about 66dB which corresponds to a 10.7 bit resolution. The power consumption is 24.32mW.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.4 no.4
• /
• pp.286-294
• /
• 2011

Cable modems typically are implemented by a forward error correction(FEC) scheme. The ITU-T Recommendation J-38 Annex B specifies using 64- and 256- quadrature amplitude modulation (QAM) and extended RS coding scheme. In implementing the cable modem, there are some problems to fabricate and fitting on FPGA chip. First, many clocks are needed in implementing cable modem because of different code rate and different modulation types. To reduce the number of clocks, we use the two memories, which are different clock speed for reading and writing data. Second, this system lost the bit-synchronization and frame-synchronization in decoder, the system recognize that all data is error. This paper solves the problems by using simple 5-stage registers and unique sync-word. Based on solutions for about problems, the cable modem is fabricated on FPGA chip name as Vertex II pro xc2vp30-5 by Xilinx, and we confirmed the effectiveness of the results.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.241-246
• /
• 2006

The paper presents the preparations work and experiences gained from realtime GPS car monitoring during the European Rally Championships organized on 10-12 June 2005 in Poland. The developed system is based on GPS and GSM/GPRS technology. Distribution and teletransmission of data are possible using different GSM operators in Poland, which makes the system fully independent. The system's server collects data from rally cars, processing and send data through VPN connections to the SQL server located in main control room. Data can be collected in real time via Internet or GPRS. Some information on GSM/GPRS range during rally championships are also presented in the paper. The study covered many trials and tests of different software and various configurations of the GPRS modems before finally the system started to work. Information coming from 10 Rally Cars were collected to the SQL Server continuously in one second interval. In real time mode these all data were displayed simultaneously in the rally main control room and in the rally press conference room. Paper describes also adopted emergency procedures and remote reconfiguration of GPS/GPRS boxes inside rally cars made during championships. Some problems and method of practical solutions are presented to avoid active jamming dangerous for a driver and his pilot, having system of communication intercoms jammed by teletransmission of GPRS 900/1800 MHz. In cooperation with rally teams special GPS/GPRS safety boxes were designed and made. Monitoring of all 7 rally stages with GPS receivers and method of calibrations of the maps were presented. GSM signal coverage was also checked in all stages. All data transmitted from rally cars were recorded in the computer. Some of our GPS cars had accidents and dispite them information were continuously sent to server. There is possibility to show in post mission mode the position of chosen cars in our rally application. Some information of best rally cars are presented also in the paper.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.1
• /
• pp.51-57
• /
• 2016

This paper describes the physical layer modem structure of Giga KOREA 5G system which is being developed by ETRI as a 5G telecommunications prototype. The objective of Giga KOREA 5G system is supporting maximum 100 Gbps data rate for each cell with wide-bandwidth baseband station and mobile station prototypes in mmWave (10~40 GHz) environment. To achieve this objective, its physical layer is composed of high performance baseband station as well as mobile station and their OFDM TDD modems. The important features of Giga KOREA 5G physical layer are carrier aggregation, multiple receiving beam searching in mobile station, high data rate channel encoder and decoder and high speed modulation and demodulation functions.

• Journal of Communications and Networks
• /
• v.13 no.5
• /
• pp.518-524
• /
• 2011

A high assurance IP encryption (HAIPE) compliant protocol accelerator is proposed for military networks consisting of red (or classified) networks and black (or unclassified) networks. The boundary between red and black sides is assumed to be protected via a HAIPE device. However, the IP layer encryption introduces challenges for bandwidth on demand satellite communication. The problems experienced by transmission control protocol (TCP) over satellites are well understood: While standard modems (on the black side) employ TCP performance enhancing proxy (PEP) which has been shown to work well, the HAIPE encryption of TCP headers renders the onboard modem's PEP ineffective. This is attributed to the fact that under the bandwidth-on-demand environment, PEP must use traditional TCP mechanisms such as slow start to probe for the available bandwidth of the link (which eliminates the usefulness of the PEP). Most implementations recommend disabling the PEP when a HAIPE device is used. In this paper, we propose a novel solution, namely broadband HAIPE-embeddable satellite communications terminal (BHeST), which utilizes dynamic network performance enhancement algorithms for high latency bandwidth-on-demand satellite links protected by HAIPE. By moving the PEP into the red network and exploiting the explicit congestion notification bypass mechanism allowed by the latest HAIPE standard, we have been able to regain PEP's desired network enhancement that was lost due to HAIPE encryption (even though the idea of deploying PEP at the modem side is not new). Our BHeST solution employs direct video broadcast-return channel service (DVB-RCS), an open standard as a means of providing bandwidth-on-demand satellite links. Another issue we address is the estimation of current satellite bandwidth allocated to a remote terminal which is not available in DVBRCS. Simulation results show that the improvement of our solution over FIX PEP is significant and could reach up to 100%. The improvement over the original TCP is even more (up to 500% for certain configurations).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.9
• /
• pp.2369-2378
• /
• 2009

In this paper, we implement measurement functionality for performance measurement of the GSM (Global System for Mobile Communication) terminal by using software. Generally speaking, the receiving algorithms in normal modems cannot be used directly to the measurement system due to the lack of the algorithm accuracy. In this paper, we propose the new receiver algorithm for precise GSM signal measurements. In the receiving algorithm, 2-stage (coarse stage, fine stage) parameters estimation (symbol-timing, frequency offset, carrier phase) scheme is used. To improve the estimation accuracy, we increase the number of the received signal samples by interpolation. The proposed GSM signal measurement algorithm can be used for verifying the hardware measurement system. In addition, the proposed algorithm can be used for the commercial system through code execution speed optimization.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.9
• /
• pp.1709-1716
• /
• 2007

In this paper, ADC with multi SHA structure is proposed for high speed operation. The proposed structure incorporates a multi SHA block that consists of multiple SHAs of identical characteristics in parallel to improve the conversion speed. The designed multi SHA is operated by non-overlapping clocks and the sampling speed can be improved by increasing the number of multiplexed SHAs. Pipelined A/D converter, applying the proposed structure, is designed to satisfy requirement of analog front-end of VDSL modem. The measured INL and DNL of designed A/D converter are $0.52LSB{\sim}-0.50LSB$ and $0.80LSB{\sim}-0.76LSB$, respectively. It satisfies the design specifications for VDSL modems. The simulated SNR is about 66dB which corresponds to a 10.7 bit resolution. The power consumption is 24.32mW.