• Journal of the Korea Organic Resources Recycling Association
• /
• v.16 no.4
• /
• pp.82-90
• /
• 2008

The generation amounts of manure and urine were total 4.57kg/head/d of 1.49kg manure/head/d and 3.08kg urine/head/d with consideration of 3 seasons and live weight. The finalized mean unit load generation of filth were estimated at BOD 199.5g/head/d, CODCr 413.5g/head/d, T-N 27.8g/head/d, T-P 5.3g/head/d with consideration of seasons and the type of stalls. The unit load generation of manure and urine from korean cow were analyzed as 10.9kg/head/day and 3.3kg/head/day, respectively. The unit load generation of manure from milch cow was analyzed to be 24.6L/head/day which was similar to the report of MOE(2006). The urine generation, 10.5L/head/day, was higher than the results from MOA(2000) and NIAR(2000), but was lower than the results from MOE(2006), NIER(1986) and KIST(1990). The unit load generation from egg layers estimated by discharged amount and concentration analysis increases in due to the difference of planting head numbers, feed stuffs and manure disposal. In case of deer unit load generation by herbivora were calculated to be higher than data from existing references because of the gap between weight per livestock and the generation amounts of manure and urine.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.1
• /
• pp.36-43
• /
• 2012

Purpose: To analyze the stress distribution of the implant and its supporting structures through 3D finite elements analysis for implants with different hexagon heights and to make the assessment of the mechanical stability and the effect of the elements. Materials and methods: Infinite elements modeling with CAD data was designed. The modeling was done as follows; an external connection type ${\phi}4.0mm{\times}11.5mm$ Osstem$^{(R)}$ USII (Osstem Co., Pusan, Korea) implant system was used, the implant was planted in the mandibular first molar region with appropriate prosthetic restoration, the hexagon (implant fixture's external connection) height of 0.0, 0.7, 1.2, and 1.5 mm were applied. ABAQUS 6.4 (ABAQUS, Inc., Providence, USA) was used to calculate the stress value. The force distribution via color distribution on each experimental group's implant fixture and titanium screw was studied based on the equivalent stress (von Mises stress). The maximum stress level of each element (crown, implant screw, implant fixture, cortical bone and cancellous bone) was compared. Results: The hexagonal height of the implant with external connection had an influence on the stress distribution of the fixture, screw and upper prosthesis and the surrounding supporting bone. As the hexagon height increased, the stress was well distributed and there was a decrease in the maximum stress value. If the height of the hexagon reached over 1.2mm, there was no significant influence on the stress distribution. Conclusion: For implants with external connections, a hexagon is vital for stress distribution. As the height of the hexagon increased, the more effective stress distribution was observed.

• Food Science and Preservation
• /
• v.22 no.3
• /
• pp.428-436
• /
• 2015

Five extraction conditions (AE, autoclave extraction; OE, oven extraction; HWSE, hot water and sonication extraction; HWASE, hot water acidified with 0.5% (v/v) acetic acid and sonication extraction; and BE, boiling extraction) were examined to compare the effects of different hot water extraction methods on the antioxidant properties of blueberries. The extraction yields of the AE, OE, HWSE, HWASE, and BE were 7.94%, 8.35%, 8.55% 9.15%, and 8.50%, respectively. The polyphenol and flavonoid contents of AE were 3.47 mg GAE/g and 1.59 mg RE/g, respectively, which were highest centents among others. Those of OE were ranked second to the highest. The total anthocyanin content of HWSE (5.29 mg/g) was significantly higher than that of others whereas that of AE showed the lowest content (0.96 mg/g). The order of ABTS radical and alkyl radical scavenging activities was as follows: AE > BE > OE > HWSE > HWASE. The antioxidant properties were considerably correspondent with the total polyphenol and flavonoid content. DPPH radical scavenging activity was quite high in HWSE, AE, and BE extraction, however, there were no significant differences among the five extraction methods in the aspect of $Fe^{2+}$ ion chelating activities. Moreover, AE showed the highest SOD activity, and protected the dermal fibroblast the best against $H_2O_2$-induced cytotoxicity. In conclusion, it was suggested that the autoclave extraction (AE) would be the most effective method for preparing blueberry hot water extracts with relatively high antioxidant activities.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.39 no.4
• /
• pp.187-194
• /
• 2023

Purpose: A mismatched size in the post and post space is a common problem during post-fixation. Since this discordance affects the bonding strength of the fiber-reinforced composite resin post (FRC Post), a corresponding luting agent is required. The aim of this study was to evaluate the bonding strength of the FRC post according to the fitness of the fiber post and the type of luting agent. Materials and Methods: Thirty mandibular premolar were endodontic-treated and assigned to two groups according to their prepared post space: Fitting (F) and Mismatching (M). These groups were further classified into three subgroups according to their luting agent: RelyX Unicem (ReX), Luxacore dual (Lux), and Duolink (Duo). A push-out test was performed to measure the push-out bond strengths. The fractured surfaces of each cross-section were then examined, and the fracture modes were classified. Results: In the ReX and Duo subgroups, the F group had a higher mean bond strength; however, the Lux subgroup had no significant difference between the F and M groups. In the analysis of the failure modes, the ReX subgroup had only adhesive failures between the cement and dentin. Conclusion: The result of this study showed that the bond strength of an FRC post was influenced by the type of luting agent and the mismatch between the diameter of the prepared post space and that of the post.