• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.109-110
• /
• 2008

본 논문은 MIMO(Multiple Input Multiple Output)- OFDM(Orthogonal Frequency Division Multiplexing) 시스템에서 V-BLAST (Vertical-Ball Laboratories Layered Space Time) 수신기에 대하여 성능을 비교하고 평가한다. 신호는 각각 송신 안테나에서 독립적으로 전송되며 QPSK(Quadrature Phase Shift Keying) 방식을 이용하여 변조 되고, 송 수신단에 각각 2개의 안테나와 각각 4개의 안테나를 사용한다. V-BLAST 수신기로 ZF(zero-Forcing), MMSE(Minimum Mean Squared Error), ZF-OSIC(Zero Forcing - Ordered Successive Interference Cancellation), MMSE-OSIC(Minimum Mean Squared Error - Ordered Successive Interference Cancellation)를 사용한다. 모의실험 결과에서 MMSE 방식이 ZF 방식 보다 좋은 BER(Bit Error Rate)을 보이고, ZF-OSIC 방식은 ZF 방식과 MMSE 방식 보다 더 좋은 BER을 가지는 것을 확인 할 수 있으며, MMSE-OSIC 방식은 사용된 방식 중 가장 좋은 성능을 보인다.

• International journal of advanced smart convergence
• /
• v.6 no.3
• /
• pp.1-8
• /
• 2017

In this paper, an improved ordered block minimum mean squared error (OB-MMSE) detector for generalized spatial modulation (GSM) systems is presented. It is based on an ordered successive interference cancellation (OSIC) technique. Its bit error rate (BER) performance and computational complexity are compared with those of the corresponding original OB-MMSE detector. It is shown that the proposed OSIC-based OB-MMSE detector outperforms the OB-MMSE detector in terms of BER without noticeable complexity increase.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.447-450
• /
• 2009

In this paper, binary pulse-antipodal modulation (2PAM) direct-sequence (DS) ultra-wideband (UWB) system is applied to multiple input multiple output (MIMO) system using vertical bell lab layered space-time (V-BLAST) structure to achieve high-data-rate communications over indoor wireless channels. The relationship between antenna dimension and BER performance of 2PAM DS UWB MIMO system is discussed. In the receiver of UWB-MIMO system, various MIMO detection algorithms such as zero-forcing (ZF), ZF-ordered successive interference cancellation (OSIC), minimum-mean-square-error (MMSE), MMSE-OSIC and maximum likelihood (ML) are comparatively studied.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.07a
• /
• pp.35-35
• /
• 2004

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.113-114
• /
• 2008

In this paper, binary pulse-position modulation (2PPM) time-hoping (TH) ultra-wideband (UWB) system is applied to multiple input multiple output (MIMO) system using vertical bell lab layered space-time (V-BLAST) structure to achieve high-data-rate communications. This UWB-MIMO system and its receivers are analyzed, and its BER performances are evaluated. In the receiver, various MIMO detection algorithms such as zero-forcing (ZF), ZF-ordered successive interference cancellation (OSIC), minimum-mean-square-error (MMSE), MMSE-OSIC and maximum likelihood (ML) are comparatively studied.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.7C
• /
• pp.616-626
• /
• 2007

In spatially multiplexed MIMO systems that enable high data rate transmission over wireless communication channels, the spatial demultiplexing at the receiver is a challenging task, and various demultiplexing methods have been developed recently by many researchers. Among the previous methods, maximum likelihood detection with QR decomposition and M-algorithm (QRM-MM)), and sphere decoding (SD) schemes have been reported to achieve a (near) maximum likelihood (ML) performance. In this paper, we propose a novel signal detection method that achieves a near ML performance in a computationally efficient manner. The proposed method is demonstrated via a set of computer simulations that the proposed method achieves a near ML performance while requiring a complexity that is comparable to that of the conventional MMSE-OSIC. We also show that the log likelihood ratio (LLR) values for all bits are obtained without additional calculation but as byproduct in the proposed detection method, while in the previous QRM-MLD, SD, additional computation is necessary after the hard decision for LLR calculation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.9A
• /
• pp.917-923
• /
• 2008

The D-STTD system obtains the diversity gain through the STTD scheme and the Multiplexing gain through parallel structure of the encoder using the STTD scheme known Alamouti Code. We are difficult to use Combining scheme of the STTD scheme for the D-STTD detection in the decoder because the D-STTD system transmits mutually different data in each other STTD encoder for multiplexing gain. Therefore, in this paper we combine the D-STTD system with Linear algorithm, SIC algorithm and OSIC algorithm known multiplexing detection scheme based on MMSE scheme and compare the performance of each system. And we propose the detection scheme of the D-STTD using MAP Algorithm and analyze the performance of each system. The simulation results show that the detector using iterative algorithm has better performance than Linear MMSE Detector. Especially, we show that the detector using MAP algorithm outperforms conventional detector.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.9C
• /
• pp.771-777
• /
• 2010

This paper proposes a new signal detection method, called QR-OSIC with Candidates (QOC) method, for spatially multiplexed multiple input multiple output (MIMO) systems. By using the ordered successive interference cancellation (OSIC) algorithm and the maximum likelihood (ML) metric, the proposed method achieves near-ML performance without requiring a large number of candidates. Although the proposed method can be used for both hard and soft decoding systems, it is especially useful for soft decoding systems since the LLR values for all the bits can be efficiently computed without using LLR estimation. The proposed method is also suitable for VLSI implementation since it leads to fixed throughput system.

• Journal of information and communication convergence engineering
• /
• v.7 no.2
• /
• pp.235-240
• /
• 2009

This paper combines various detection techniques and analyzes their performances in detecting the transmission information of the D-STTD scheme that uses, in parallel, the STTD scheme known as the Alamouti code. The D-STTD scheme adopts one of the STTD schemes for transmission to acquire diverse effects and uses another form of STTD for multiplexing effects. Due to the multiplexing effect that transmits different data, it is difficult to apply D-STTD to the conventional STTD combining technique. This paper combines the D-STTD system with linear algorithm, SIC algorithm and OSIC algorithm known as multiplexing detection scheme based on MMSE scheme. And we propose the detection scheme of the D-STTD using MAP algorithm and analyze the performance of each system. The simulation results showed that the detector using iterative algorithm has better performance than Linear MMSE Detector. Especially, we can show that the detector using MAP algorithm outperforms conventional detector.

• ETRI Journal
• /
• v.45 no.5
• /
• pp.899-909
• /
• 2023

In mobile communication, the most exploratory technology of fifth generation is massive multiple input multiple output (MIMO). The minimum mean square error and zero forcing based linear detectors are used in multiuser detection for MIMO single-carrier frequency division multiple access (SCFDMA). When the received signal is detected and regularization sequence is joined in the equalization of spectral null amplification, these schemes experience an error performance and the signal detection assesses an inversion of a matrix computation that grows into complexity. Ordered successive interference cancelation (OSIC) detection is considered for MIMO SC-FDMA, which uses a posteriori information to eradicate these problems in a realistic environment. To cancel the interference, sorting is preferred based on signal-to-noise ratio and log-likelihood ratio. The distinctiveness of the methodology is to predict the symbol with the lowest error probability. The proposed work is compared with the existing methods, and simulation results prove that the defined algorithm outperforms conventional detection methods and accomplishes better performance with lower complication.