• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.50
• /
• pp.65-73
• /
• 1999

Most psychophysical studies in manual material handling (MMH) have paid more attention to two-handed MMH activities than to one-handed MMH activities. Also, studies are involved only with single MMH activities - lifting, lowering, carrying, holding, pushing or pulling. Very few studies are reported on the determination of workers' capacities for combinations of one-handed MMH activities (lifting a box, then carrying the box, and lowering the box). The objective of this study was to find the psychophysical and physiological responses of human subjects from a simulated industrial task involving one-handed and two-handed combined tasks. The capacities that were determined as the maximum acceptable weight workloads for 1 hr work period for one-handed and two-handed combined tasks - lifting a box from floor to knuckle height, carrying the box for 4.3 m, and lowering the box from knuckle to floor height - were determined psychophysically under three frequencies: six handlings per minute, one handling per minute and one handling per five minutes. In addition to maximum acceptable weight, heart rate and RPE values on wholebody, back, and arm were also measured as responses.

• Journal of the Ergonomics Society of Korea
• /
• v.36 no.4
• /
• pp.325-341
• /
• 2017

Objective: The purpose of this study is to suggest the guidelines of operation phases to minimize injuries and musculoskeletal disorders in manual material handling (MMH) tasks through literature reviews. The guidelines are presented as the preparing phase, lifting phase, carrying phase, and lowering phase. Also, we summarized the non-numerical general guidelines for MMH tasks. Background: Manual material handling is still a main cause to musculoskeletal disorders. Method: Procedures of a literature review are classified into database selection, keyword search, title review, abstract review related to literature selection, guideline review and arrangement. A total 48 papers and books were analyzed in detail by title and abstract reviews. Results: In the preparing phase, we suggested the basic conditions in MMH, preparing procedure, clothing and protective equipment, and education. In the lifting and carrying phases, we recommended maximal acceptable weight by frequency and body posture. In the lowering phase, we suggested the lowest weight and safety body postures. Finally, we recommended general guidelines and guideline items for MMH. General guidelines are presented to suggest worker selection, technical education, and work design parts. Conclusion: We suggested the guidelines on the four operation phases of MMH tasks such as preparing, lifting, carrying, and lowering phases. Application: The findings of this study can be utilized as guidelines for proactive recommendations according to workers in MMH tasks.

• Proceedings of the ESK Conference
• /
• 1997.04a
• /
• pp.95-99
• /
• 1997

Most studies in manual material handling (MMH) have paid more attention to single MMH activities-lifting, lowering, carrying, holding, pushing or pulling and have ignored combined activities. Also, many studies have been involved with two-handed MMH activities rather than to one-handed MMH activities. Very few studies are reported on the determination of workers' capacities for combinations of one-handed MMH activities (e.g. lifting a box, then carrying the box, and lowering the box). The objective of this study was to utilize the psychophysical approach to examine the combinations of lifting, carrying and lowering activities from a simulated industrial task involving one- handed and two-handed combined tasks and to develop mathematical models for combined tasks. Ten male students served as subjects for the study. The capacities that were determined as the maximum acceptable weight workloads for 1 hr work period for one-handed and two-handed combined tasks-lifting a box from floor to knuckle height, carrying the box for 4.3 m, and lowering the box form knuckle to floor height -were determined psychophysically under three frequencies: six handlings per minute, one handling per minute and one handling per five minutes. Combined MMH capacities models for one-handed tasks were developed. Te advantages and disadvantages of different models are discussed.

• Journal of Korean Elementary Science Education
• /
• v.29 no.2
• /
• pp.166-185
• /
• 2010

Astronomy areas in the elementary science textbooks of Korea and the U.S.A. have been compared to find advantages and disadvantages of Korean textbooks. The analysis objects are the 7th national curriculum science textbooks for Korea and the Macmillan McGraw-Hill(MMH) science textbooks for the U.S.A. The results are as follows: First, in contexts, Korean science textbooks contain mostly inquiry activities and partly reading materials. However, MMH ones contain mostly explanations including photographs, related activities, and various reading materials. Second, in the contents and order, the observation activities of constellations are emphasized in Korean science textbooks, while the MMH ones explain solar system up to the universe in details. In addition, Korean science textbooks deal with one subject only once during the whole elementary course while MMH ones deal with one subject repeatedly in several grades. Third, in the frameworks of the international mathematics and science study (TIMSS) 2007, Korean science textbooks do not introduce some contents presented in TIMSS 2007, whereas MMH textbooks introduce every one of them in time. Fourth, the major subjects such as change of moon phases, constellations, the solar system, and change of seasons are handled independently in Korean science textbooks without strong correlation, while they are systematically done related with the rotation and the revolution of the earth in MMH ones.

• Journal of Broadcast Engineering
• /
• v.22 no.1
• /
• pp.15-27
• /
• 2017

CRA(Conditional Replenishment Algorithm) was proposed to improve the visual quality of SC-MMH(Service Compatible 3DTV using Main and Mobile Hybrid delivery) which is a kind of hybrid 3DTV system and has been standardized by ATSC. In SC-MMH system, reference view and additional view may have different resolutions and/or encoding methods. To reconstruct 3D view, additional view needs to be enlarged as same as reference view. Although the performance of CRA is quite satisfactory, there may exist some blocky artifacts in the enlarged view since it adopts block-shaped processing unit with quad-tree structure. In this paper, we analyze the main causes of blocky artifacts in CRA and show these artifacts can be successfully suppressed by applying the deblocking filter at receiver side.

• Restorative Dentistry and Endodontics
• /
• v.36 no.4
• /
• pp.313-323
• /
• 2011

Objectives: This study investigated the optimal combination of 3-component photoinitiation system, consisting of CQ, p-octyloxy-phenyl-phenyl iodonium hexafluoroantimonate (OPPI), and 2-dimethylaminoethyl methacrylate (DMAEMA) to increase the degree of conversion of resin monomers, and analyze the effect of the ratio of the photoinitiator to the co-initiator. Materials and Methods: Each photoinitiators (CQ and OPP) and co-initiator (DMAEMA) were mixed in three levels with 0.2 wt.% (low concentration, L), 1.0 wt.% (medium concentration, M), and 2.0 wt.% (high concentration, H). A total of nine groups using the Taguchi method were tested according to the following proportion of components in the photoinitiator system: LLL, LMM, LHH, MLM, MMH, MHL, HLH, HML, HHM. Each monomer was polymerized using a quartz-tungsten-halogen curing unit (Demetron 400, USA) for 5, 20, 40, 60, 300 sec and the degree of conversion (DC) was determined at each exposure time using FTIR. Results: Significant differences were found for DC values in groups. MMH group and HHM group exhibited greater initial DC than the others. No significant difference was found with the ratio of the photoinitiators (CQ, OPPI) to the co-initiator (DMAEMA). The concentrations of CQ didn't affect the DC values, but those of OPPI did strongly. Conclusions: MMH and HHM groups seem to be best ones to get increased DC. MMH group is indicated for bright, translucent color and HHM group is good for dark, opaque colored-resin.

• Proceedings of the ESK Conference
• /
• 1994.04a
• /
• pp.105-105
• /
• 1994

신체 부위를 이용한 Manual Materials handling(MMH) 작업시 무리한 작업하중의 취급으로 인하 여 많은 사고 또는 요통이 발생하기 때문에 작업자의 능력에 맞는 적정 하중에 대한 연구가 필요 하다. MMH작업의 적정하중에관한 연구는 미국 등의 나라에서는 많이 이루어져 왔으나 우리나라에서 는 연구되어 있지 않다. 미국의 경우 NIOSH Guideline을 만들어 MMH시 작업지침으로 활용하고 있으 나 이 지침을 그대로 우리나라에 적용하기에는 신체조건이 달라 우리나라 고유의 연구가 필요하겠다. 적정하중의 연구에는 많은 시간과 경비가 필요하기 때문에 외국의 경우 심리 육체적방법(Psychophysical Method)을 사용하여 시간과 경비를 줄이고도 실제 8시간 작업시의 결과와 비슷한 결과를 얻었다. 본 연구에서는 MMH작업의 적정 하중결정에 있어서 심리육체적 방법을 사용하여 한국인 작업자에 대한 하중과 HIOSH Guideline의 RWL값과의 비교를 하였다. 학생군과 실제 작업자군의 피실험자에 대하여 심리육체적 방법을 적용하여 들기작업을 실험하였다. 6가지 들기 작업을 20분 동안 실시하여 피실험자들이 자신에게 적합하다고 생각하는 적정하중을 측정하였다. 그 결과, 학생군은 RWL값보다 평균 2.5배를, 작업자군은 3.4 배를 적정하중으로 정하였다. 따라서 HIOSH Guideline을 적용한 RWL값은 우리나라 작업자에게는 많은 여유가 있는 하중임을 보여 주었다.

• Journal of Korean Elementary Science Education
• /
• v.31 no.4
• /
• pp.463-480
• /
• 2012

This study is intended to investigate the frequency of scientific writing tasks in Korean and American science textbooks, to compare the differences in types of posing the writing tasks according to the level of the children's scientific cognition, and to analyze the differences in the organization and development of writing ones of each chapter and thus to propose an effective way of presenting scientific writing in science textbooks. Korean 'Science' and 'Experiment Observation Workbook'and Macmillan Mcgraw-Hill(MMH) Science for fourth graders were analyzed for the purpose. The results are as follows: First, Korean textbooks contain more science writing tasks per pages, and less per chapters than MMH one. Both text books provide balanced amount of science writing tasks, yet MMH especially does systematic exercises for each chapter. Second, the qualitative analysis of the textbooks' scientific writing shows that both textbooks contain a significant amount of "understanding" and "explanatory" writing, which reflects that the purpose of writing in science textbooks is leaning towards acquiring and verifying scientific concepts. In American textbooks, however, writings utilizing extensive cognition process and materials are also present. It is necessary for textbooks to present diverse and expressive writing assignments including personal opinions. Third, there are differences in organization and development of science writing tasks. Science writing tasks in Korean textbooks are present independently with lesson objectives of the chapters and practices, while those in MMH are systematically developed. Based on these results, it is necessary to systemize the textbooks' way of presenting writing tasks for effective teaching and learning. By organizing the writing materials and thus developing diverse materials, and by implementing extensive cognitive process in the writing activities, textbooks will be able to contribute in attracting the students' interests and in improving their scientific knowledge.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.4
• /
• pp.300-309
• /
• 2017

A spacecraft obtains a reaction momentum required for an orbit correction and an attitude control by exhausting a combustion gas through a small thruster in space. If the exhaust plume collides with spacecraft surfaces, it is very important to predict the exhaust plume behavior of the thruster when designing a satellite, because a generated disturbance force/torque, a heat load and a surface contamination can yield a life shortening and a reduction of the spacecraft function. The purpose of the present study is to ensure the core technology required for the spacecraft design by analyzing numerically the exhaust gas behavior of the 10 N class bipropellant thruster for an attitude control of the spacecraft. To do this, calculation results of chemical equilibrium reaction between a MMH for fuel and a NTO for oxidizer, and continuum region of the nozzle inside are implemented as inlet conditions of the DSMC method for the exhaust plume analysis. From these results, it is possible to predict a nonequilibrium expansion such as a species separation and a backflow in the vicinity of the bipropellant thruster nozzle.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2002.11a
• /
• pp.371-376
• /
• 2002

자동화된 생산시설에도 불구하고, 아직도 여러 현장에는 사람이 직접 bag, box, carton 등을 들고, 내리고, 옮기는 등의 인력운반 (Manual Materials Handling, MMH) 작업으로 생산활동이 이루어지고 있다. 상자 운반 작업에서 있어서 손잡이는 최대허용무게에 영향을 미친다는 연구 결과들이 많이 나왔지만, 자세에 따른 손잡이 형태의 영향에 관한 연구들은 미흡한 실정이다. 따라서 본 연구에서는 MMH 작업시 흔히 사용되는 3가지 자세(구부린 자세, 팔을 편 자세, 팔을 90$^{\circ}$로 굽혔을 때 자세)에서 손잡이 형태에 따라 tote box를 들 때, 작업자세와 손잡이 형태에 따른 Maximum Voluntary Contraction (이하 MVC)를 측정하고 MVC에 대한 작업자세와 손잡이 형태의 상관관계의 통계적 분석, 주관적 평가방법(Borg법)과 MVC와의 유의성을 검증하였다.