• Journal of the Optical Society of Korea
• /
• v.18 no.1
• /
• pp.15-22
• /
• 2014

We present a novel bandwidth measurement scheme for multimode optical fibers. Amplified spontaneous emission (ASE) radiation was utilized for a source of intrinsically modulated light with a wide modulation bandwidth. In our measurement scheme, the continuous-wave (CW) ASE light that passed through a multimode fiber (MMF) under test was analyzed by the fourth-order power with a high-speed photodetector and an electric spectrum analyzer. The modulation transfer function of the multimode fiber could be directly measured with the photoelectric spectra in the modulation frequency domain. The measurement result of our method was experimentally compared to that of the conventional measurement scheme based on the impulse response measurement. It has been found that our scheme provides a stable measurement means of MMF characterization that is suitable for the field testing due to the simplicity of the system.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.2 no.3
• /
• pp.313-320
• /
• 2013

The fractional slot windings are widely used in rotating machine in order to increase the flexibility of design and improve the voltage waveform. However, the MMF wave of fractional-slot windings are found to contain unique harmonic component, which are designated as even order space flux harmonics, fractional number flux harmonics, or both. They may cause stray loss and stator core vibration. This paper proposes new winding methods "novel interspersed windings" and "expanded group windings" to reduce these harmonics. The advantages of two proposed windings are verified by using numerical analysis and measurement test of winding model.

• Journal of Sensor Science and Technology
• /
• v.19 no.3
• /
• pp.184-190
• /
• 2010

In this paper, a remote submersion warning system based on multi-mode optical fiber(MMF) sensors and a wireless sensor network(WSN) are proposed. To improve the reliability and stability of the sensors, the dual optical fiber sensors combined to the optical coupler are demonstrated. A slave zigbee as a wireless sensor module was used as a platform to monitor and record the signal from the MMF sensors and then transmits these information to a master zigbee wirelessly. The monitoring system running the $LabVIEW^{(R)}$ software was connected to the internet to support the short message service(SMS) through extensible markup language(XML) web service. No matter where the managers are, they can always receive the real-time remote-monitoring data for safety check.

• Proceedings of the KSR Conference
• /
• 1998.11a
• /
• pp.601-607
• /
• 1998

This paper presents the efficient 2-D linear brake analysis model which can compensate the lateral leakage flux by changingng the airgap length and magneto-motive force(MMF). The linkage flux of the 2-D analysis is larger than that of 3-D analysis. This is caused by the assumption in 2-D analysis that geometric and physical values are constant along the perpendicular direction(z) to the analysis region. The equivalent MMF have been calculated from the linkage flux difference between the 2-D and 3-D analyses which are performed at zero velocity. The performances of the linear brake have been analyzed effectively by using the compensated 2-D models without using 3-D FEM.

• Journal of Magnetics
• /
• v.16 no.1
• /
• pp.58-63
• /
• 2011

This paper presents design procedures of a transverse flux linear motor (TFLM). The minimum and maximum flux linkage was determined by the simplified equivalent magnetic circuit and estimated average magnetic flux density at the air gap region by considering the shape of applied magnetomotive force (MMF). With this information, the number of turns of each phase winding was calculated based on the amplitude of applied voltage and speed of a mover. The rated current, coil diameter, and winding area were obtained with the aid of an empirical formula for determining the required MMF. The usefulness of the proposed design method for TFLM is verified by the three-dimensional equivalent magnetic circuit network (EMCN) method and the experimental results of prototyped machine.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.43 no.5
• /
• pp.331-335
• /
• 2017

Clinical limitations following closed reduction of an intracapsular condylar fracture include a decrease in maximum mouth opening, reduced range of mandibular movements such as protrusion/lateral excursion, and reduced occlusal stability. Anteromedial and inferior displacement of the medial condyle fragment by traction of the lateral pterygoid muscle can induce bone overgrowth due to distraction osteogenesis between the medial and lateral condylar fragments, causing structural changes in the condyle. In addition, when conventional maxillomandibular fixation (MMF) is performed, persistent interdental contact sustains masticatory muscle hyperactivity, leading to a decreased vertical dimension and premature contact of the posterior teeth. To resolve the functional problems of conventional closed reduction, we designed a novel method for closed reduction through protrusive MMF for two weeks. Two patients diagnosed with intracapsular condylar fracture had favorable occlusion after protrusive MMF without premature contact of the posterior teeth. This particular method has two main advantages. First, in the protrusive position, the lateral condylar fragment is moved in the anterior-inferior direction closer to the medial fragment, minimizing bone formation between the two fragments and preventing structural changes. Second, in the protrusive position, posterior disclusion occurs, preventing masticatory muscle hyperactivity and the subsequent gradual decrease in ramus height.

• Journal of Korean Academy of Nursing
• /
• v.48 no.1
• /
• pp.26-37
• /
• 2018

Purpose: The aim of this study was to evaluate the effects of active mandibular exercise (AME) in patients with limited mouth opening after maxillomandibular fixation (MMF) release. Methods: The study used a quasi-experimental, nonequivalent control group and a pre test-post test design. Sixty-two patients with Maxillomandibular Fixation Release were assigned to the experimental (n=31) or control group (n=31). The AME was performed in the experimental group for 4 weeks. The exercise AME consisted of maximal mouth opening, lateral excursion and protrusive movement. These movements were repeated ten times a day. After the final exercise of the day, the number of tongue blades used for mouth opening was noted. The effect of AME was evaluated after MMF release at different time intervals: a) immediately, b) after 1 week, c) after 2 weeks, d) after 4 weeks, and e) after 12 weeks. The exercise was assessed using the following criteria: a) mandibular movements, b) pain scores associated with maximal mouth opening, c) discomfort scores associated with range of movement, and d) daily life activities that involve opening the mouth. Results: The experimental group showed significant improvement regarding the range of mandibular movements (maximal mouth opening (F=23.60, p<.001), lateral excursion to the right side (F=5.25, p=.002), lateral excursion to the left side (F=5.97, p=.001), protrusive movement (F=5.51, p=.001)), pain score (F=39.59, p<.001), discomfort score (F=9.38, p<.001). Daily life activities that involve opening the mouth were more favorable compared to those in the control group. Conclusion: The AME in patients after MMF release is helpful for increasing mandibular movement range, decreasing pain and discomfort, and improving day life activities that involve opening the mouth. Therefore, AME is highly recommended as an effective nursing intervention.

• Archives of Craniofacial Surgery
• /
• v.9 no.2
• /
• pp.105-109
• /
• 2008

Temporomandibular joint(TMJ) and dental occlusion are important in functional aspect as well as in cosmetic aspect for craniofacial surgery such as orthognathic and traumatic surgery. During these operations, appropriate maxillomandibular fixation(MMF) is especially necessary to conserve or reconstruct, dynamic TMJ and functional occlusion. Arch bar is one of the most popular method to gain proper MMF. Seventeen patients including 5 patients with mandibular fracture, 12 patients with orthognathic surgery(6 patients had relatively normal occlusion, however 6 patients had facial anomalies such as hemifacial microsomia with irregular occlusal plane.) were joined in this study. Arch bar was contoured on the dental cast, which was prepared for model surgery, prior to apply it on the facial anomaly patient. On using pre-contoured arch bar, patients felt better during the procedure and surgeons saved time. Moreover, well-contoured arch bar promises precise transmission of force on the bone, which implies surgeons do not need to worry about the occlusion while fixing bony structures. Authors suggest how to apply arch bar to satisfy basic theories about dental row and occlusion based on the experience. In addition, it is proposed to contour arch bar on the dental impression prior to apply it on the patient who has irregular and complex occlusal plane.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.7A
• /
• pp.535-541
• /
• 2005

This paper proposes a hybrid optical lines composed of single-mode fiber(SMF) and multi-mode fiber(MMF) for gigabit-capable Passive Optical Network(GPON) using a WDM method with a single light source per each channel, and reports the results of transmission performance the proposed lines. The transmission link uses a direct modulated DFB-LD for high speed downstreams at the optical line terminal(OLT) of central office(CO) and a low cost SFP type transceiver for low-speed upstream in optical network unit(ONU). To split or combine the transmission channels, wavelength MUX/DEMUX are used in the optical line section, and MMFs not longer than 1 km are attached to the SMF lines at the ONU side of the WDM-PON links. We have performed the transmission experiment on the downstream of 2.5 Gbit/s, and 1.25 Gbit/s, and the upstream of 1.25 Gbit/s, and 622 Mbit/s which are recommended by ITU-T G.984.2. The transmission margin and feasibility of the proposed links have been tested to be suitable up to 2.5 Gbit/s transmission.

• Journal of Preventive Medicine and Public Health
• /
• v.29 no.2 s.53
• /
• pp.187-198
• /
• 1996

The industrial use of MMMF(man-made mineral fibers), has been increasing, particularly since the banning of most asbestos products. Fibrous minerals can cause health abnormalities currently associated with occupational exposure to glass fiber. This study was conducted to evaluate health risks of glass fiber manufactory workers within the country. We examined questionaries, physical examination including auscultation, chest x-ray, pulmonary function test for 488 male workers, to go through their dermal itching symptoms and respiratory evaluation. we had the results as follows. 1. In 45% of the workers itching had been expressed at their entrance. At that time we was investigating, 18.5% had itching, and most of them complained it when they fall asleep and night. The Sequent itching site is waist and groin, upper and lower extremity in order, and it had been expressed mainly during summer and winter. 2. As the results of ventilatory functions test, 6.0% were obstructive type, 1.0% were restrictive type. So, glass fiber exposures should be controlled or elimination by protective devices in the workplace. 3. The means of FVC, $FEV_1,\;FEV_1%$ were in normal range. As the comparison of ventilatory functions by age groups, MMF was decreased significantly for the group, 50 years old and more than other groups. And the comparison by the serving periods at glass fiber producing factory, MMF was decreased for the workers had worked for $11\sim15$ years. Therefore, MMF be more sensitive index in the evaluation of ventilatory impairments caused by glass fiber workers.