• 전자공학회논문지
• /
• 제51권8호
• /
• pp.3-10
• /
• 2014

최근 폭증하는 모바일 데이터 트래픽을 수용하기 위하여 밀리미터파 (mmWave)가 큰 관심을 받고 있으며, 4 세대 LTE-A(Long Term Evolution-Advanced) 표준을 기반으로 MMB (Millimeter Mobile Broadband) 시스템의 필요성이 대두되고 있다. 현재 mmWave 통신 채널에 대한 많은 연구가 이루어지고 있으며, MMB 채널 환경에 대한 성능 분석 또한 관심의 대상이다. 본 논문에서는 5세대 이동통신을 위한 MMB 시스템을 설계하고 mmWave의 전파 특성 분석을 통한 채널 모델을 제안한다. 또한 MMB 시스템의 28 GHz 대역에서 MMB 채널 환경에 대한 성능을 비교 분석한다.

• Computers and Concrete
• /
• 제14권6호
• /
• pp.675-694
• /
• 2014

Annular and solid concrete specimens with different aspect ratios and static unconfined compressive strengths were studied for impact loading using SHPB test setup. Numerical simulations in LSDYNA were also carried out and results were validated. The stress-strain curves obtained under dynamic loading were also compared with static compressive tests. The mode of failure of concrete specimen was a typical ductile failure at high strain rates. In general, the dynamic increase factor (DIF) of thin solid specimens was higher than thick samples. In the numerical study, the variation of axial, hydrostatic and radial stresses for solid and annular samples was studied. The core phenomenon due to confinement was observed for solid samples wherein the applied loads were primarily borne by the innermost concrete zone rather than the outer peripheral zone. In the annular samples, especially with large diameter inside hole, the distribution of stresses was relatively uniform along the radial distance. Qualitatively, only a small change in the distribution of stresses for annular samples with different internal diameters studied was observed.

• The Plant Pathology Journal
• /
• 제34권4호
• /
• pp.335-340
• /
• 2018

To investigate the difference in the disinfectant efficiency of ozone microbubbles ($O_3MB$) and ozone millibubbles ($O_3MMB$), the morphological change of the treated Fusarium oxysporum f. sp. melonis spores was observed with scanning and transmission electron microscopies (SEM and TEM). The disinfectant efficiency of $O_3MB$ on F. oxysporum f. sp. melonis spores was greater than that of $O_3MMB$. On observation with SEM, it was revealed that morphological change of F. oxysporum f. sp. melonis spores was caused by $O_3MB$ and $O_3MMB$, and damage to the spore surfaces by $O_3MB$ occurred sooner than that by $O_3MMB$. On observation with TEM, it was furthermore confirmed that F. oxysporum f. sp. melonis spores treated with $O_3MB$ induced wavy deformation of cell membrane and the intracellular change different from that with $O_3MMB$. Therefore, the greater disinfection efficiency of $O_3MB$ was suggested to be caused due to the function of the MB in addition to the oxidative power of $O_3$.

• 한국안전학회지
• /
• 제28권4호
• /
• pp.14-18
• /
• 2013

Blades of horizontal axis are nowadays made of composite materials. Generally, composite materials satisfy design provides lower weight and good stiffness, while laminate composites have often damages as like the delamination and cracks at the interface of laminates. The box spar and tail parts of a blade are composed of the CFRP/GFRP hybrid laminate composites. However, delamination and the interfacial crack often occur in the interface of CFRP/GFRP hybrid laminate composites under the mixed mode fracture condition, especially mode I and mode II. Therefore, there is a need for the evaluation of the mixed mode fracture behavior during the delamination of CFRP/GFRP hybrid laminates. This study shows the experimental results for the delamination fracture toughness in CFRP/GFRP hybrid laminate composites. Fracture toughness experiments and estimation are performed by using DMMB(Dissimilar mixed mode bending) specimen. The materials used in the test are a commercial woven type CFRP(Carbon fiber reinforced plastic) prepreg(CF3327) and UD type GFRP(Glass fiber reinforced plastic) prepreg(HD224A). A CFRP/GFRP hybrid laminate composite is composed by the 10 plies CFRP and GFRP prepreg for DMMB. A thickness of CFRP and GFRP layer is 2.5mm and 3.0mm, respectively. Also the fulcrum location which is a loading parameter is changed from 80 to 100mm on the specimen of length 120mm because it defines the ratio of mode I to mode II. In this study, the effects of the fulcrum location are evaluated in the viewpoint of energy release rate in mode I and mode II contribution. The results show that the delamination crack initiates at higher displacement and lower load according to the increase of the fulcrum location ratio. And the variation of the energy release rate for mode I and II contributions for the mode mixity are shown.

• Archives of Plastic Surgery
• /
• 제42권6호
• /
• pp.735-740
• /
• 2015

Background Botulinum toxin (BT) chemodenervation and anterior belly of digastric muscle (ABD) transfer are both treatment options in the management of an isolated marginal mandibular branch of the facial nerve (MMB) palsy. We compare the patient satisfaction following either BT injections or ABD transfer in the management of their isolated MMB palsy. Methods Patients in the ABD-arm of the study were identified retrospectively from September 2007 to July 2014. The patients in the BT-arm of the study were identified prospectively from those attending the clinic. Both groups of patients completed a validated patient satisfaction survey. Statistical analysis was performed and a P-value <0.05 was considered statistically significant. Results Seven patients were in the ABD-arm and 11 patients in the BT-arm of the study. The patient satisfaction in both groups was high with 45% of ABD-arm patients and 40% of BT-arm patients rating their overall outcome as 'better' or 'much better', which was significantly more than the proportion rating their outcome as 'worse' or 'much worse' (P<0.001), although there was a significant trend towards those in the ABD-arm being more likely to be dissatisfied with their outcome (P=0.01). Conclusions BT therapy is a good first-line intervention in the management of isolated MMB palsy. We have, however, shown that the overall satisfaction in both groups is high. Therefore, in patients who would prefer a more permanent solution to manage their facial asymmetry, ABD transfer remains a satisfactory treatment option with a good level of patient satisfaction.

• 한국식품영양학회지
• /
• 제31권1호
• /
• pp.43-51
• /
• 2018

This study was conducted to investigate the quality of pumpkin paste added with different starches during storage at $4^{\circ}C$ for 8 days. Pumpkin paste was evaluated for pH, carotenoid, syneresis, color values, texture, and sensory characteristics. The properties of the pumpkin paste were studied on three different starches (CON: control, MCP: cow pea starch, MMB: mung bean starch, and MSP: sweet potato starch). The initial pH of the pumpkin paste with starches were 6.13~6.16. The pH of pumpkin paste increased as the starches added increased. The carotenoid content of CON was higher in the pumpkin paste processing. The change of syneresis significantly increased with the storage period, and the amount of change of MCP and MMB added with starch was smaller than CON without the added starch. The Hunter's L-values of the pumpkin paste increased, whereas the a- and b-value decreased as the amount of starches added increased. The results of the textural analysis showed that the hardness of MCP and MMB was different from that of other pumpkin paste, showing a lower value such as 38.26 g, 38.93 g, while CON and MSP was 40.43 g and 42.49 g, respectively. A sensory evaluation indicated that starches could enhance the overall texture characteristics of pumpkin paste. In terms of the overall acceptance of the pumpkin paste, the experimental group with MCP scored the best.

• KEPCO Journal on Electric Power and Energy
• /
• 제6권2호
• /
• pp.163-171
• /
• 2020

전력연구원에서 설계한 5 MW급 일괄설치시스템의 예인안정성 및 내항성능 검증을 위해 수조모형시험을 실시하였다. 1/48 축소모형을 만들어 정수 및 파랑 중 시험을 수행하였다. 실선기준 4, 5, 6 knots의 대응속도로 예인하며 예인선의 장력을 계측하고, 실선의 필요 예인 동력을 추정하였다. 또한, 관성계측장치를 이용하여 모형의 6자유도 운동을 계측하였으며, 파랑 중 구속모형시험을 통해 내항성능을 확인하였다.

• 정보처리학회논문지A
• /
• 제16A권4호
• /
• pp.263-272
• /
• 2009

스마트 홈 인프라를 기반으로 유비쿼터스 컴퓨팅 환경을 구축하기 위해, 여러 연구기관과 산업체에서는 홈 네트워크에 대한 다양한 연구를 진행하고 있다. 이로 인해 다수의 홈 네트워크 미들웨어들이 제안되었으며, 이는 홈 네트워크 표준화를 지연시켰고, 이러한 표준화의 지연은 이 기종 미들웨어 간 상호운용성 문제를 해결할 수 있는 미들웨어 브리지를 요구하였다. 현재 두 미들웨어에 대한 상호운용성을 지원하는 일대일 브리지, 다수의 미들웨어에 대한 상호운용성을 지원하는 일대다 브리지 등 여러 미들웨어 브리지에 대한 개발과 상호운용성 지원 기법에 대한 연구가 진행되고 있다. 하지만 기존의 시스템과 기법들은 특히 스마트 홈 환경에서 요구되는 동적 확장성과 성능에 대한 고려가 부족하다. 미들웨어 브리지는 전문적인 지식이 없는 사용자를 위해 브리지의 수정 없이 쉽게 새 미들웨어를 추가할 수 있는 브리지 확장성을 제공해야 한다. 또한 브리지는 메시지 집중을 해결할 수 있는 부하 분산 기법 역시 제공해야 한다. 본 논문에서는 홈 네트워크 환경에서의 동적 확장성과 부하분산을 위한 다중 미들웨어 브리지(Multi-Middleware Bridge, MMB)를 제안한다. MMB는 분산 구조를 통해 브리지 확장성과 부하 분산 기능을 제공한다. 또한 이에 대한 구현과 평가를 통해, 상호운용성 지원 기능과 브리지 확장성, 부하분산 알고리즘의 성능을 검증한다.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제3권1호
• /
• pp.11-14
• /
• 1998

A toluene-oxidizing strain of Pseudomanas mendocina KR1 containing toluene-4-mono-oxygenase (TMO) completely degrades TCE with the addition of toluene as a co-substrate in aerobic condition. In order to construct in situ bioremediation system for TCE degradation without any growth-stimulating nutrients or toxic inducer such as toluene, we used the carbon-starvation promoter of Pseudomonas putida MK1 (Kim, Y. et al., J. bacteriol., 1995). Upon entry into the stationary phase due to the deprivation of nutrients, this promoter is strongly induced without further cell growth. The TMO gene cluster (4.5 kb) was spliced downstream of the carbon starvation promoter of Pseudomonas putida MK1, already cloned in pUC19. TMO under the carbon starvation promoter was not expressed in E. coli cells either in stationary phase or exponential phase. For TMO expression in Pseudomonas strains, tmo and carbon starvation promoter region were recloned into a modified broad-host range vector pMMB67HES which was made from pMMB67HE(8.9 kb) by deletion of tac promoter and lacIq (about 1.5 kb). Indigo was produced by TMO under the carbon starvation promoter in a Pseudomonas strain of post-exponential phase on M9 (0.2% glucose and 1mM indole) or LB. 18% of TCE was degraded in 14 hours after entering the stationary phase at the initial concentration of 6.6 ${\mu}$M in liquid phase.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1986년도 추계학술발표회 논문집
• /
• pp.59-63
• /
• 1986

This paper presents a basic planning of CMDSS(Centrallized Maintenance Decision Support System)for future operation and maintenance of telecommunication network, the main components of CMDSS are MDB, MMB, DSDB, MDBMS, MMAMS, and IGMS. ANd the efficiency and the effectiveness depend on the adequate design of the decision procedure to assisy operation and maintenance persinnels.