• The Journal of Korean Society for Radiation Therapy
• /
• v.29 no.2
• /
• pp.83-91
• /
• 2017

Objectives: The purpose of this study was to evaluate the error of the leaf position accuracy of the MLC due to the gravity effect according to the gantry angle by using picket fence test using EPID and GafChromic EBT3 film. Materials and Methods: A 5 cm solid phantom was placed on the table and the SAD was set to 100 cm. The EBT3 film was placed exactly over the solid phantom and covered a 1.5 cm solid phantom and the picket fence test was performed. The EPID was measured under the same conditions as the EBT3 film at SID 100 cm. The gantry angles were measured at $0^{\circ}$, $90^{\circ}$, $180^{\circ}$ and $270^{\circ}$ in order to evaluate the position of the MLC according to the gantry angle. For the geometric evaluation of the MLC, the leaf position accuracy of the MLC was analyzed using the analysis program. Results: In case of EPID, when the gantry angle was changed to $0^{\circ}$, $90^{\circ}$, $180^{\circ}$, $270^{\circ}$, the difference of the position errors of the leaves was 0.18 mm, 0.31 mm, 0.20 mm, 0.26 mm on the average and the maximum values of the errors were respectively 0.44 mm, 0.54 mm, 0.34 mm, 0.44 mm. In case of EBT3 film, when the gantry angle was changed to $0^{\circ}$, $90^{\circ}$, $180^{\circ}$, $270^{\circ}$, the difference of the position errors of the leaves was 0.19 mm, 0.21 mm, 0.19 mm, 0.31 mm on the average and the maximum values of the errors were respectively 0.35 mm, 0.45 mm, 0.36 mm, 0.48 mm. Conclusion: In this study, we analyzed the position error of the leaf of the MLC according to the gantry angle, and confirmed the position error of the leaf by gravity effect. As a result of comparing the leaf position accuracy using EPID and EBT3 film according to the variation of gantry angle, a larger error occurred in the error analysis method using EPID than that of EBT3 film. Therefore, in the case of IMRT based on MLC, as well as verification of accurate dosimetry should be conducted, it is considered that the quality control and verification for the precise operation of the MLC will be needed. and it is necessary to compare and verify the method of analysis.

• The korean journal of orthodontics
• /
• v.33 no.5 s.100
• /
• pp.339-350
• /
• 2003

The purpose of this study was to investigate the micro-implant height and anterior hook height to prevent maxillary six anterior teeth from lingual tipping and extruding during space closure. We manufactured maxillary dental arch form, bracket and wire, using the computer aided three-dimensional finite element method. Bracket was $.022'{\times}.028'$ slot size and attached to tooth surface. Wire was $.019'{\times}.025'$ stainless steel and $.032'{\times}.032'$ stainless steel hook was attached to wire between lateral incisor and canine. Length of hook was 8mm and force application points were marked at intervals of In. Four micro-implants were implanted on alveolar bone between second premolar and first molar. The heights of them were 4, 6, 8, 10mm starting from wire. We analyzed initial displacement of teeth by various force application point applying force of 150gm to each micro-implant and anterior hook. The conclusions of 4his study are as the following : 1. When the micro-implant height was 4m and the anterior hook height was 5mm and below, anterior teeth were tipped lingually. When the anterior hook height was 6mm and above, anterior teeth were tipped labially. 2. When the micro-implant height was 6mm and the anterior hook height was 6mm and below, the anterior teeth were tipped lingually. When the anterior hook height was 6m and above, the anterior teeth were tipped labially. But lingual tipping of anterior teeth decreased and labial tipping Increased when the micro-implant height was 6mm, compared with 4mm micro-implant height. 3. When the micro-implant height was 8mm and the anterior hook height was 2mm, the anterior teeth were tipped lingually. When the anterior hook height was 3mm and above, labial tipping movement of the anterior teeth increased proportionally. 4. When the micro-implant height was 10mm and the anterior hook height was 2mm and above, labial tipping of the anterior teeth increased proportionally. 5. As the anterior hook height increased, aterior teeth were tipped more labially. But extrusion occurred on canine and premolar area because of the increase of wire distortion. 6. Movement of the posterior teeth was tipped distally during maxillary six anterior teeth retraction using micro-im plant because of the friction between bracket and were Based on the results of this study, we could predict the pattern of the tooth movement according to position of micro-implant and height of anterior hook. It seems that we can find the force application point for proper tooth movement in consideration of inclination of anterior anterior teeth, periodontal condition, overjet and overbite

• Clinics in Shoulder and Elbow
• /
• v.10 no.1
• /
• pp.99-105
• /
• 2007

Purpose: The morphological study and dynamic stability of the ulnar nerve around the elbow joint was investigated in asymptomatic normal population using ultrasonography. The purpose of this study is to provide fundamental data for ultrasonographic diagnosis of ulnar neuropathy in cubital tunnel syndrome. Materials and Methods: Fifty cases of 25 healthy male volunteers, aged between 20 to 30 years, included in this study. High resolution 7.5 MHz linear probe was used to examine the ulnar nerve in axial and longitudinal views. In a longitudinal view, the course, position and the thickness of nerve were monitored, the diameter of ulnar nerve and dynamic stability at elbow flexion and extension were measured in an axial view at four different points; 1cm proximal to medial epicondyle, behind the medial epicondyle, entrance to Osborne ligament, and 1cm distal to Osborne ligament. Results: The short diameters of ulnar nerve at elbow extension at four anatomic points were 2.66 mm, 2.97 mm, 2.64 mm, and 2.69 mm and the long diameters were 4.61 mm, 4.56 mm, 4.36 mm, and 4.37 mm, which showed no significant change at each point. However, at elbow flexion, the short diameters were changed to 2.72 mm, 2.34 mm, 2.65 mm, and 2.41 mm and the long diameters into 4.49 mm, 5.40 mm, 4.16 mm, and 4.66 mm. At elbow flexion, significant morphologic change was observed in the medial epicondyle area, and the diameter of the ulnar nerve was shortest at the entrance of Osborne ligament both at flexion and extension. In terms of dynamic stability, nine subluxations and seven dislocations were observed. Conclusion: This study shows dynamic instability and a morphological change of long and short diameters of ulnar nerve at flexion and extension in a normal person, which should be considered in the ultrasonographic diagnosis of ulnar neuropathy.

• Radiation Oncology Journal
• /
• v.18 no.2
• /
• pp.114-119
• /
• 2000

Purpose : To evaluate the e지ent and frequency of the inter- and intra-treatment isocenter deviations of the whole pelvis radiation field in using small bowel displacement system (SBDS). Methods and Materials : Using electronic portal imaging device (EPID), 302 postero-anterior 232 lateral portal images were prospectively collected from 11 patients who received pelvic radiation therapy (7 with cervix cancer and 4 with rectal cancer). All patients were treated in prone position with SBDS under the lower abdomen. Five metallic fiducial markers were placed on the image detection unit for the recognition of the isocenter and magnification. After aligning the bony landmarks of the EPID images on those of the reference image, the deviations of the isocenter were measured in right-left (RL), cranio-caudal (CC), and PA directions. Results : The mean inter-treatment deviation of the isocenter in each RL, CC, and PA direction was 1.2 mm ($\pm$ 1.6 mm), 1.0 mm ($\pm$3.0 mm), and 0.9 mm ($\pm$4.4 mm), respectively. Inter-treatment isocenter deviations over 5 mm and 10 mm in RL, CC, and PA direction were 2, 12, 24$\%$, and 0, 0, 5$\%$, respectively. Maximal deviation was detected in PA direction, and was 11.5 mm. The mean intratreatment deviation of the isocenter in RL, CC, and PA direction was 0 mm ($\pm$0.9 mm), 0.1 mm ($\pm$ 1.9mm), and 0 mm ($\pm$1.6 mm), respectively. All intra-treatment isocenter deviations over 5 mm in each direction were 0, 1, 1$\pm$, respectively. Conclusions : As the greatest and the most frequent inter-treatment deviation of the isocenter was along the PA direction, it is recommended to put more generous safety margin toward the PA direction on the lateral fields if clinically acceptable in pelvic radiotherapy with SBDD.

• Korean Journal of Ichthyology
• /
• v.32 no.3
• /
• pp.166-181
• /
• 2020

The egg development, early life history and spawning site characters of Korean endemic fish, Coreoleuciscus splendidus (Gobioninae), were investigated at the part of Jo-jong stream in Korea from May 2020. The fertilized eggs were 2.05~2.23 mm (mean, 2.13 mm) in diameter and had no oil globules. The embryo began to hatching about 98 hrs after fertilization under water temperature of 20±1℃. The newly-hatched larvae were 5.03~5.68 mm (mean, 5.31 mm) in total length (TL), and their mouth and anus were not opened. 4 days after hatching, Several rod-like cupulae were observed on the head and lateral side of the body at 6.95~7.89 mm (mean, 7.51 mm). 7 days after hatching, the post-larva stage were 8.39~9.29 mm (mean, 8.78 mm) in total length, and their york were completely absorbed. The cupulae were completely distinguished. They entered the juvenile stage when all fin-rays were formed at 29 days after hatching, and their TL were 14.16~17.04 mm (mean, 14.99 mm). Squamation was initiated on the caudal body at approximately 18.21~23.74 mm (mean, 30.28 mm), 38 days after hatching, and completed at 26.82~33.33 mm (mean, 19.42 mm), 73 days after hatching, the external characteristics from of juveniles were same to adults. The spawning site was characterized by bottom structure of pebble (64~16 mm) and gravel (16~2 mm), environmental conditions of the spawning sites were 6~18 cm in water depth, 0.43~0.73 m/sec in bottom water velocity. In spawning sites, an egg mass or separated eggs were located a small gap of under the pebble and gravel.

• The Journal of Engineering Geology
• /
• v.33 no.1
• /
• pp.169-187
• /
• 2023

Aggregates from 84 cities and counties in Korea were tested for quality to allow analysis of the physical characteristics of aggregates from river, land, and forest environments. River and land aggregates were analyzed for 18 test items, and forest aggregates for 12 test items. They were classified according to watershed and geology, respectively. The observed physical characteristics of the river aggregates by basin were as follows: aggregates from the Geum River basin passed through 2.5, 1.2, 0.6, 0.3, 0.15, and 0.08 mm sieves; clay lumps constituted the Nakdong River basin material; aggregates from the Seomjin River basin passed through 10, 5, and 2.5 mm sieves; those from the Youngsang River basin passed through 1.2, 0.6, 0.3, 0.15, and 0.08 mm sieves; and aggregates from the Han River basin passed through 10, 5, 2.5, 1.2, 0.6, 0.3, and 0.08 mm sieves, Stability; Standard errors were analyzed for the average amount passing through 10, 0.6, and 0.08 mm silver sieves, and performance rate showed different distribution patterns from other physical characteristics. Analysis of variance found that 16 of the 18 items, excluding the absorption rate and the performance rate, had statistically significant differences in their averages by region. Considering land aggregates by basin, those from the Nakdong River basin excluding the Geum River basin had clay lumps, those from the Seomjin River basin had 10 and 5 mm sieve passage, aggregates from the Youngsang River basin had 0.08 mm sieve passage, and those from the Han River basin had 10, 0.6, and 0.08 mm sieve passage. The standard error of the mean of the quantity showed a different distribution pattern from the other physical characteristics. Analysis of variance found a statistically significant difference in the average of all 18 items by region. Analyzing forest aggregates by geology showed distributions of porosity patterns different from those of other physical characteristics in metamorphic rocks (but not igneous rocks), and distributions of wear rate and porosity were different from those of sedimentary rocks. There were statistically significant differences in the average volume mass, water absorption rate, wear rate, and Sc/Rc items by lipid.

• The korean journal of orthodontics
• /
• v.36 no.4
• /
• pp.275-283
• /
• 2006

Objective: Small orthodontic mini-implants are useful as anchorage. However they have some weaknesses such as loosening. This study was carried out to analyze the mechanical effects of the dual pitch and diameter on the insertion and removal torque of mini-implants. Methods: The threads of mini-implants were mono and dual pitch. The diameters of mini-implants were 1.4 mm and 1.6 mm. Four groups were tested (mono 1.4 mm, mono 1.6 mm, dual 1.4 mm and dual 1.6 mm). All were inserted and removed on polyurethane foam with the torques being measured. Results: The maximum torque of the dual pitch groups was higher than the mono pitch groups during removal but lower during insertion. The maximum torque of the 1.6 mm diameter groups was higher than the 1.4 mm diameter groups during insertion and removal. The dual pitch 1.4 mm group showed the lowest insertion torque but had similar or superior levels of removal torque to that of the mono pitch 1.6 mm group. Conclusions: The dual pitch especially showed a continuous high removal torque after the peak. Despite the small diameter, the dual pitch might improve the initial mechanical stability.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.38 no.2
• /
• pp.91-100
• /
• 2002

The field experiments were carried out to examine for the mesh selectivity in trammel net and optimum mesh size, during Aug. 10~13, Non 9~13 2000 in Jumunjin, Kangwon-Do and during Jun. 1~27 2001 in Suyong-Bay, Busan. The experiments in Jumunjin area were conducted by using trammel nets with seven different mesh sizes (60, 75, 90, 105, 135, 150, 180mm) and those in Suyong-Bay were done by using trammel nets and gill nets with three different mesh sizes (60, 75, 90mm) in order to compare two types of nets of same structure. The mesh selectivity analysis was done mainly with flat fish(Eopsetta grigorjewi) that was occupied 60% out of total catches. And the mesh selectivity was written by extension of Kitahara's method included master curve with function type. The results obtained are summarized as follows 1. Total number of catch by, trammel net was 2,331 and that of gill net was 1,433, and flat fishes occupied 59.8 ~60% in total catches. 2. The value of optimum l/m by, trammel net was higher about 0.1 than that of gill net according as trammel net was 2.56, and gill net was 2.47. 3. The 50% selection range by, trammel net was wider about 1.5 time than that of gill net according as trammel net was 1.88~3.36(1.48) and gill net was 2.00~3.02(1.02). 4. The optimum mesh size(OMS) was estimated that trammel net was about 141mm and gill net was about 132mm on first maturity length(FML) 265mm of flat fish. 5. On the optimum mesh size based on the first maturity length of flat fish, The 50% range by, trammel net was wider about 76mm than that of gill net according as trammel net was 265 mm~474mm and gill net was 265mm~398mm.

• Journal of Aquaculture
• /
• v.11 no.1
• /
• pp.49-58
• /
• 1998

The spawning behavior and early life history of the Korean aucha perch, Coreoperca herzi were studied. The eggs were spawned in a one-layer mass, hanging from the underside of a largy stone and guarded by one male. According to the considerable size difference os eggs in the individual ovaries, it was concluded that they spawns several times within a spawning season of May~June. The ripe eggs were demersal and adhesive, and their diameter were 2.60~3.04mm with several oil globule of 0.10~0.64mm. Hatching in the tank with $19.0{\pm}1.0^{\circ}C.$ in men water temperature started from the 380 hours after fertilization. Newly-hatched larvae were measured 6.45~7.34mm in total length (TL, mean : 6.85mm), and mouth and anus were open. Melanophores were present on the head, around the yolk, and on the dorsal part of the abdominal region. 3 days old larvae were measured 7.00~7.40mm in TL (mean : 7.25mm), and they fed Daphnia sp. and Brachionus plicatilis actively. 6 days old larvae transformed to postlarval stage and they were 7.94~10.10mm in TL (mean : 9.00mm). As yolk sac were nearly absorbed, the caudal notochord flex at 45. Aggregate numbers of all fin rays were completed at over 16.90~19.80mm in TL (30 days after hatching), at which time the larvae reached the juvenile stage. In fifty days old larvae(24.60~27.10mm in TL) were similar in body form, lateral line and color to adult.

• Korean Journal of Ichthyology
• /
• v.10 no.2
• /
• pp.207-215
• /
• 1998

Just after hatching the embryo has a yolk sac and straighted digestive tract. Just after parturition in 5.0mm TL the mouth and anus were opened. In the larval stage of 5.2mm TL, digestive tract could be divided into pharynx, esophagus, stomach, pyloric caeca and intestine of the early differentiated state. The esophagus of larvae in 5.3mm TL has a PAS positive mucous cell. From over 5.7mm TL, PAS positive goblet cell recognized in the intestine. PAS positive absorptive cell began to appear in the intestine from 5.9mm TL. Yolky materials were absorbed completely in 6.0mm TL. In the larvae of B.5mm TL, gastric glands were observed in the mucosa, but the surface epithelium did not have PAS positive granules. From over 9.0mm TL, the histological structure of esophagus showed similar to adult. In the juvenile stage from 13.0mm to 15.0mm TL, histological structure of the stomach, pyloric caeca and intestine showed similar to adult. From the ultrastructural and histochemical study, it is concluded that the functional digestive tract is present in the juvenile stage from 18.0mm to 20.0mm TL.