• Journal of the Korean Applied Science and Technology
• /
• v.34 no.3
• /
• pp.545-554
• /
• 2017

This study is concerned with the stability of liquid crystal forming emulsifier with localized depend on change of pH using liquid crystal forming agent of advanced company. The liquid crystal emulsifying agent was localized using Sugar Crystal-LC (bio-tech Co., Ltd., Korea), and comparative samples were measured by using Nikkomulese-LC (Nikko Camicarls, Japan) and Alacel-LC (Croda Camicarls, UK). Liquid crystal formation was confirmed microscopically to show the formation of liquid crystal structure at acidic (pH=4.2), neutral (pH=7.0) and alkaline (pH=11.7). The particles of the liquid crystal were observed with a polarizing microscope according to the stirring speed. The stirring time was all the same for 3 minutes with a homo-mixer, and the stirring speed was increased to 2500 rpm, 3500 rpm and 4500 rpm to observe the liquid crystal state. As a result, it was found that the Korean surfactant was more stable and clear liquid crystal structure was formed than the two foreign acids. In the case of the UK in acid zone, the emulsion particle size was uniform and unstable. In the case of Japanese surfactant, it has similar structure and performance to those of localized Korean. It was found that Korean surfactant had superior emulsifying performance in acid zone compared with foreign products. It is possible to develop various formulations such as liquid crystal cream, lotion, eye cream, etc. using Sugar Crystal-LC emulsifier as an application cosmetic field, and it is expected that it can be widely applied as emulsifying technology for skin care external application in the pharmaceutical industry and the pharmaceutical industry as well as the cosmetics industry.

• Korean Journal of Microbiology
• /
• v.44 no.4
• /
• pp.289-292
• /
• 2008

Trisodium phosphate 12 hydrate and citric acid monohydrate mixture showed the strong anti-sticking effect on Streptococcus mutans, Streptococcus mitis, and Streptococcus salivarius, which are adhered to glass beads. Each Streptococcus species was shaking-cultured in brain heart infusion broth containing three glass beads. After 18 hr, glass beads were slightly washed into normal saline by three-pin-pointed pincette. Each three glass-beads set was put into reagent -containing tubes, which have 40 mg of bits of weighing paper for gaining brushing effect as similar as brushing one's teeth. The tubes were shaken by vortex mixer for 10 min except non-oral microbe, Streptococcus agalactiae (5 min). The samples were colony-counted by serial agar dilution method. Experiment was repeated three times for each Streptococcus species. The relative ratios of bacterial de-adherence by reagents were calculated in comparison with normal saline control. The de-adherence degree of citric acid-trisodium phosphate-saline mixture (CTS, pH 6.0) against Streptococcus mutans came to an average of 12.5 times compared with normal saline control. Trisodium-saline (TS, pH 8.4) showed the average of 7.5 times, and citric acid-saline (CS, pH 4.6) showed 6.0 times compared to the control group. The bacterial de-adherence degree against Streptococcus salivarius was each 7.2,2.6 and 2.8 times in above reagent sequence in comparison with saline control. CTS and TS showed 2.4 and 3.4 times of anti-sticking effect on Streptococcus mitis respectively, but CS had no anti-sticking effect on this bacterium. CTS, TS and CS showed 0.7, 0.6, and 0.6 times on non-oral microbe, Streptococcus agalactiae, separately compared with saline control. These results show that oral Streptococcus mutans, Streptococcus salivarius, and Streptococcus mitis, which are causative of dental caries or subacute endocarditis, may be easily removed from oral cavity by CTS mixture. It is conceivable that our experimental results will enable the development of a new conceptive toothpaste to prevent dental caries or subacute endocarditis after drawing teeth.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.2
• /
• pp.167-176
• /
• 2021

When producing recycled asphalt mix, it is important that the old binder of reclaimed asphalt pavement(RAP) should be well melted during blending in the mixer. The recycled asphalt mix is produced by instant mixing(IM) of all materials(RAP, virgin asphalt and new aggregates) all together in the mixer. However, in the same recycled mix, the binder around RAP aggregate was found to show higher oxidation level than the binder coated around the virgin aggregate because the old binder of RAP was not rejuvenated properly while instant mixing. The partially-rejuvenated RAP binder is assumed to be a high stiffness point in IM recycled mix. In this study, the stage mixing(SM) method was introduced; blending RAP and virgin asphalt for the first stage, and then mixing all together with hot new aggregates for the second stage. To compare the effect of the two mixing methods on moisture resistance of recycled mixes, a statistical t-test was performed between SM and IM using indirect tensile strength(ITS) and tensile strength ratio(TSR). Three conditioning methods were used; a 16-h freezing and then 24-h submerging, 48-h submerging, and 72-h submerging in 60℃ water. It was found that the TSR(=ITS_wet/ITS_dry) values of the mixes prepared by SM was clearly higher than the IM mixes, and coefficients of variation of SM mixes were lower than the IM mixes. It was also observed that the ITS_WET of SM was significantly different from the IM at α=0.05 level by statistical t-test. The ITS_WET of SM mix was reduced less than the IM mix in severer conditioned mixes. Therefore, it was concluded that the stage mixing method was an important blending technique for producing better-quality of recycled asphalt mixes, which would show higher moisture resistance than the recycled mixes produced by conventional instant mixing.

• Elastomers and Composites
• /
• v.35 no.1
• /
• pp.46-52
• /
• 2000

Miscibility improvement between polypropylene(PP) and ethylene-propylene-diene-terpolymer (EPDM) was studied by introducing specific interaction into both polymers. PP was modified by grafting maleic anhydride(MAH) onto backbone, leading to MAH-grafted PP(PP-g-MAH). Sulfonated EPDM ionomer neutralized with bivalent zinc cation(ZnSEPDM) was used as one component. The blends of PP-g-MAH and ZnSEPDM were prepared at $200^{\circ}C$ in Brabender Roller Mixer. Fourier transform-infrared(FT-IR) spectroscopic and dynamic mechanical studies have been performed to investigate the miscibility. FT-IR spectral peak corresponding to carbonyl group in PP-g-MAH and that to sulfonate group in ZnSEPDM were shifted to lower and higher frequency with increasing ZnSEPDM content, respectively, in the blends. Glass transition temperature of ZnSEPDM was increased up to 70wt.% of ZnSEPDM, and again decreased above 70wt.%. It can be concluded from the shift of FT-IR characteristic peaks and the changes of glass transition temperatures that the miscibility between PP and EPDM was improved via introducing specific interaction, i.e., dipole-ion interaction.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.11 s.353
• /
• pp.210-215
• /
• 2006

In this paper, we develop the PLL system of the local oscillator system using Gunn oscillator VCO for millimeter wave band receiving system. The local oscillator system consists of the $86{\sim}115GHz$ Gunn. diode oscillator part, the RF processing part including the diplexer and the harmonic mixer, and the DPLL system including Gunn modulator and controller. Based on this configuration, we verify the frequency and power stability of the developed local oscillator system. We developed system which applied to DPLL technique instead of the existing analog PLL method to accomplish this purpose. The developed system for this purpose is tested the frequency and power stability for a long time to confirm performance. Since we confirmed this system that had frequency characteristic of within ${\pm}10Hz$, very fine output drift power characteristic of $0.2{\sim}0.3dBm$ and about 200MHz locking range, it verified suitable for cosmic radio receiving system through the test result.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.2
• /
• pp.20-30
• /
• 1999

We have made the single side hand filter for the dual channel receiver which is a heterodyne receiver to observe the cosmic radio waves with 100GHz band ranged from 85GHz to 115GHz and 150GHz band ranged from 125GHz to 175GHz simultaneously. We have introduced the filter theory using the principle of the Martion-Puplett interferometer, which has the characteristics of rotated polarization. To reduce the loss of the transmission and beam coupling which are caused from the path difference associated with the intermediate frequency the design and the implementation have been intensely considered. The receiver needs two filters with different characteristics each other. Because each of them has the optimum positions as a function frequency at which the signal frequency is fed to mixer and the image frequency is rejected to the image termination load. The intermediate frequency and its band width have been also evaluated. We have measured the property of two filters using the vector network analyser and the beam measurement system which is made by us. The responses of the filter as a function of the position and the frequency are compared with the theory. It is shown that not only the measured values are very close to the theoretical values, but also the image rejection ratios are better than 22dB for both filters. Through successful observation using a dual channel receiver with two manufactured filters, the performance of the filters has finally verified.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.3
• /
• pp.343-350
• /
• 2012

A planar solid oxide fuel cell (PSOFC) is studied in its application in a high-temperature stationary power plant. Even though PSOFCs with external reformers are designed for application from the distributed power source to the central power plant, such PSOFCs may sacrifice more system efficiency than internally reformed SOFCs. In this study, modeling of the PSOFC with an external reformer was developed to analyze the feasibility of thermal energy utilization for the external reformer. The PSOFC system model includes the stack, reformer, burner, heat exchanger, blower, pump, PID controller, 3-way valve, reactor, mixer, and steam separator. The model was developed under the Matlab/Simulink environment with Thermolib$^{(R)}$ modules. The model was used to study the system performance according to its configuration. Three configurations of the SOFC system were selected for the comparison of the system performance. The system configuration considered the cathode recirculation, thermal sources for the external reformer, heat-up of operating gases, and condensate anode off-gas for the enhancement of the fuel concentration. The simulation results show that the magnitude of the electric efficiency of the PSOFC system for Case 2 is 12.13% higher than that for Case 1 (reference case), and the thermal efficiency of the PSOFC system for Case 3 is 76.12%, which is the highest of all the cases investigated.

• Applied Chemistry for Engineering
• /
• v.24 no.2
• /
• pp.165-170
• /
• 2013

An external gelation method in place of an internal gelation method applied to the fabrication process of an intermediated compound of Uranium Oxy-Carbide (UCO) kernel spheres for Very High Temperature Reactor (VHTR) fuel preparation is under development in Korea. For the preliminary experiments of the UCO kernel sphere preparation using an external gelation method, the carbon black dispersion experiments were carried out using a simulated broth solution. From the selection experiments of various kinds of carbon black through dispersion experiments in a viscous metal salt solution, Cabot G carbon black was selected owing to its dispersion stability, and the homogeneous dispersing state of carbon black particles in our system. For the effective dispersion of nano-size aggregated carbon black particles in a high viscous liquid, the carbon black particles in a metal salt solution were first de-aggregated with ultrasonic force. The mixed solution was then dispersed secondly by the use of the extremely high-speed agitation with a mechanical mixer of 6000 rpm after feeding the Poly Vinyl Alcohol (PVA) in the solution. This results in the broth solution with good stability and homogeneity alongside no further changes in physical properties.

• Journal of Broadcast Engineering
• /
• v.11 no.1 s.30
• /
• pp.116-129
• /
• 2006

The progress of data transmission technology through the Internet has spread a variety of realistic contents. One of such contents is multi-view video that is acquired from multiple camera sensors. In general, the multi-view video processing requires encoders and decoders as many as the number of cameras, and thus the processing complexity results in difficulties of practical implementation. To solve for this problem, this paper considers a simple multi-view system utilizing a single encoder and a single decoder. In the encoder side, input multi-view YUV sequences are combined on GOP units by a video mixer. Then, the mixed sequence is compressed by a single H.264/AVC encoder. The decoding is composed of a single decoder and a scheduler controling the decoding process. The goal of the scheduler is to assign approximately identical number of decoded frames to each view sequence by estimating the decoder utilization of a Gap and subsequently applying frame skip algorithms. Furthermore, in the frame skip, efficient frame selection algorithms are studied for H.264/AVC baseline and main profiles based upon a cost function that is related to perceived video quality. Our proposed method has been performed on various multi-view test sequences adopted by MPEG 3DAV. Experimental results show that approximately identical decoder utilization is achieved for each view sequence so that each view sequence is fairly displayed. As well, the performance of the proposed method is examined in terms of bit-rate and PSNR using a rate-distortion curve.

• Journal of Korea Soil Environment Society
• /
• v.4 no.3
• /
• pp.45-56
• /
• 1999

A biofilter was established to remove the ammonia, which is representative nitrogen-contained malodorous gas. in a compost factory. Removal efficiency of ammonia and hydrogen sulfide also was investigated. A quantity of malodor gas produced in a compost factory was affected greatly by the weather. compost states and working condition of a fertilizing mixer, and the produced gas concentrations doubled by above various parameters. By operating a water scrubbing system for removing water-soluble malodorous gases effectively. we could improve the removal efficiency over three times. We investigated long-term stability of biofilter under continuous gas flow(SV=500h-1) for 100 days. The results showed 30 days of microbial retention time. After the days, deodorization efficiency of biofilter was kept steady state. and the removal efficiency was kept over 95% for ammonia and 97% for hydrogen so]fide. respectively. The electric consumption of the biofilter, which could treat malodorous gas of 100$\textrm{m}^3$/min, applied in the compost factory was evaluated about 80u0day and water consumption was 80~100$\ell$/day. These results concluded that the biofilter is a excellent deodorization technology as well as cost-effective for removing malodorous gas produced in a compost factory.