• Journal of Communications and Networks
• /
• v.5 no.2
• /
• pp.104-115
• /
• 2003

It is well known that Multiple Input Multiple Output (MIMO) systems offer the promise of achieving very high spectrum efficiencies (many tens of bit/s/Hz) in a mobile environment. The gains in MIMO capacity are sensitive to the presence of spatial and temporal correlation introduced by the radio environment. In this paper, we examine how MIMO capacity is influenced by a number of factors e.g., a) temporal correlation b) various combinations of low/high spatial correlations at either end, c) combined spatial and temporal correlations. In all cases, we compare the channel capacity that would be achievable under independent fading. We investigate the behaviour of "capacity fades," examine how often the capacity experiences the fades, develop a method to determine level crossing rates and average fade durations and relate these to antenna numbers. We also evaluate the influence of channel correlation on the capacity autocorrelation and assess the fit of a Gaussian random process to the temporal capacity sequence. Finally we note that the particular spatial correlation structure of the MIMO channel is influenced by a large number of factors. For simplicity, it is desirable to use a single overall correlation measure which parameterizes the effect of correlation on capacity. We verify this single parameter concept by simulating a large number of different spatially correlated channels.

• Journal of electromagnetic engineering and science
• /
• v.19 no.1
• /
• pp.20-30
• /
• 2019

A wide-band multiple-input multiple-output (MIMO) antenna with dual-band (2.4 and 5 GHz) operation is proposed for premium indoor access points (IAPs). Typically, an omni-directional pattern is used for dipole antennas and a directional radiation pattern is used for patch antennas. In this paper, both antenna types were used to compare their performance with that of the proposed $2{\times}2$ MIMO antenna. We simulated and measured the performance of the MIMO antenna, including the isolation, envelope correlation coefficient (ECC), mean effective gain (MEG) for the IAPs, and the throughput, in order to determine its communication quality. The performance of the antennas was analyzed according to the ECC and MEG. The proposed antenna has sufficient performance and excellent characteristics, making it suitable for IAPs. We analyzed the communication performance of wireless networks using the throughput data of a typical office environment. The network throughput of an 802.11n device was used for the comparison and was conducted according to the antenna type. The results showed that the values of the ECC, MEG, and the throughput have unique characteristics in terms of their directivity, antenna gains, isolation, etc. This paper also discusses the communication performance of various aspects of MIMO in multipath situations.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.47-50
• /
• 2008

Multiple-input multiple-output (MIMO) is an efficient technology to increase data rate in wireless networks due to bandwidth and power limitations. Data transmission rate between transmitter and receiver is determined by channel capacity. MIMO has anadvantage of reliable communication over wireless channel because of utilizing the channel capacity properly. In this letter, we drive a new formula, closed form capacity formula, using confluent hypergeometric function.

• Journal of Communications and Networks
• /
• v.14 no.3
• /
• pp.273-279
• /
• 2012

In this paper, we propose an iterative interstream interference cancellation technique for system with frequency selective multiple-input multiple-output (MIMO) channel. Our method is inspired by the fact that the cancellation of the interstream interference can be regarded as a reduction in the magnitude of the interfering channel. We show that, as iteration goes on, the channel experienced by the equalizer gets close to the single input multiple output (SIMO) channel and, therefore, the proposed SIMO-like equalizer achieves improved equalization performance in terms of normalized mean square error. From simulations on downlink communications of $2{\times}2$ MIMO systems in high speed packet access universal mobile telecommunications system standard, we show that the proposed method provides substantial performance gain over the conventional receiver algorithms.

• ETRI Journal
• /
• v.40 no.5
• /
• pp.582-591
• /
• 2018

In this paper, we present a performance analysis of large-scale multi-input multi-output (MIMO) systems for wireless backhaul networks. We focus on fully connected N nodes in a wireless meshed and multi-hop network topology. We also consider a large number of antennas at both the receiver and transmitter. We investigate the transmission schemes to support fully connected N nodes for half-duplex and full-duplex transmission, analyze the achievable ergodic sum rate among N nodes, and propose a closed-form expression of the achievable ergodic sum rate for each scheme. Furthermore, we present numerical evaluation results and compare the resuts with closed-form expressions.

• Journal of information and communication convergence engineering
• /
• v.5 no.3
• /
• pp.229-232
• /
• 2007

This paper investigates on the use of constant-amplitude zero-autocorrelation (CAZAC) sequence for channel estimation in multiple-input multiple-output (MIMO) system over indoor wireless channel. Since the symbol-length of the conventional 4-phase CAZAC sequence is short, there is a limitation to use it for MIMO system in multipath environments. An algorithm which generates longer CAZAC sequences is proposed to overcome that problem. Flexible symbol-length of 4-phase CAZAC sequences can be made by the proposed algorithm. Therefore appropriate symbol-length of CAZAC sequences could be utilized as preambles in accordance with the number of transmit antennas and channel condition. The effect of the number of CAZAC sequences for channel estimation is presented in terms of mean square error (MSE).

• Journal of Communications and Networks
• /
• v.13 no.1
• /
• pp.63-69
• /
• 2011

In this paper, we propose a fixed-complexity sphere encoder (FSE) for multi-user multi-input multi-output (MU-MIMO) systems. The proposed FSE accomplishes a scalable tradeoff between performance and complexity. Also, because it has a parallel tree-search structure, the proposed encoder can be easily pipelined, leading to a tremendous reduction in the precoding latency. The complexity of the proposed encoder is also analyzed, and we propose two techniques that reduce it. Simulation and analytical results demonstrate that in a $4{\times}4$ MU-MIMO system, the proposed FSE requires only 11.5% of the computational complexity needed by the conventional QR decomposition with M-algorithm encoder (QRDM-E). Also, the encoding throughput of the proposed encoder is 7.5 times that of the QRDM-E with tolerable degradation in the BER performance, while achieving the optimum diversity order.

• Journal of Communications and Networks
• /
• v.14 no.2
• /
• pp.199-205
• /
• 2012

This work investigates the progressive linear precoder design for packet retransmissions in multi-input multi-output (MIMO) systems with multiple codewords and automatic repeat request (ARQ) bundling feedback. Assuming perfect channel state information, a novel progressive linear ARQ precoder is proposed in the perspective of minimizing the packet error rate. We devise the ARQ precoder by combining power loading and sub channel pairing between current retransmission and previous transmissions. Furthermore, we extend the design to the case that the channel estimation error exists. Numerical results show that the proposed scheme can improve the performance of MIMO ARQ systems significantly regardless of the channel estimation error.

• Journal of Communications and Networks
• /
• v.9 no.3
• /
• pp.254-264
• /
• 2007

A promising approach to improve the performance of mobile location system is the use of antenna arrays in both transmitter and receiver sides. Using advanced array signal processing techniques, such multiple-input multiple-output (MIMO) communication systems can offer more mobile location information by exploiting the spatial properties of the multipath channel. In this paper, we propose a novel approach to determine the position of mobile terminal based on estimated multipath signal parameters using only one base station in MIMO communication systems. This approach intends to minimize the error occurring from the estimation of multiple paths and gives an optimal estimation of the position of mobile terminal by simultaneously calculating a set of nonlinear location equations. This solution breaks the bottleneck of conventional mobile location systems which have to require multilateration of at least three base stations.

• Journal of KIISE:Information Networking
• /
• v.34 no.1
• /
• pp.27-32
• /
• 2007

Next-generation wireless networks are expected to support a wide range of services, including high-rate data applications, Various service types request differentiated QoSs(Qualities of Service) such as minimum data rate, accuracy, fairness and so on. Although resources of radio systems are limited, for many applications, it is important that certain QoS targets are required to be met. In this paper, we propose a QoS based scheduling algorithm for next generation systems, based on analyzing previous researches, and we develop the proposed QoS algorithm only for MIMO(multi-Input Multi-Output) systems. Moreover, we subsequently prove that the proposed algorithm optimize throughput relative to prespecified target values and converge to certain throughput.