• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.2
• /
• pp.69-76
• /
• 2014

Multiple-input and multiple-output (MIMO) technique is used in many communication fields in order to increase the channel capacity. However, this MIMO system has difficulty of miniaturization of antenna size due to the multiple RF chains Also, multiple RF chain raises some problems which increase power consumption at RF circuit and degrade the system performance due to the interference between RF chains. Because of these reasons, beamspace MIMO (BS-MIMO) technique with only single RF chain was proposed for MIMO transmission. This BS-MIMO system basically uses electronically steerable parasitic array radiator (ESPAR) antenna. Existing ESPAR antenna has a 5-element structure. So, it is possible to do only $3{\times}3$ MIMO transmission. Therefore, in order to extend BS-MIMO dimension, extension of ESPAR antenna structure is essential. In this paper, we show that BS-MIMO dimension can be increased according to the extension of structure of the ESPAR antenna, as in the conventional MIMO techniques. For example, we show that it is possible to design the $7{\times}7$ BS-MIMO transmissions with the 13-element ESPAR antenna. Also, when the number of parasitic elements of ESPAR antenna increases by two elements, MIMO dimension is expanded by 1.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.4
• /
• pp.1-7
• /
• 2013

In the next generation of mobile communication systems, high data rates and high capacity will be possible if multiple antennas are used at new frequencies. This paper presents the correlations between channel parameter path loss (PL), delay spread (DS), angular spread (AS) and K-factor established based on channel measurements. To avoid interference from Korean DTV broadcasting, we measured the channel characteristics in urban/rural/suburban areas on Jeju Island using a channel sounder and $4{\times}4$ antennas. The correlations between channel parameter show that the wireless channel characteristics can be determined and effective communication system design can be produced for use in similar environments.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.1
• /
• pp.70-76
• /
• 2011

LTE Re1-10 aims at peak. data rates of 1Gbits/s for the downlink and 500 Mbits/s for the uplink, which can be accomplished by not only wide spectrum but also advanced MIMO techniques such as precoded MIMO and cooperative relays. Considering some relays can have more direct signal paths than mobile stations do, LoS components are examined to build more efficient codebooks for Rician channels. The proposed codebooks perform better than the existing LTE codebooks as the criterium of LoS, K-factor increases. Conserving the advantages and max-min chordal distance of the existing LTE codebooks, the proposed ones also maximize the minimum chordal distances between codewords over Rician fading channels. Link-level simulation with LTE system parameters confirm the performance improvements as the value of K increases.

• Information and Communications Magazine
• /
• v.22 no.9
• /
• pp.100-111
• /
• 2005

다중안테나 (multiple-input multiple-output: MIMO) 시스템의 장점은 단일안테나에 비해서추가적인 주파수나 송신 전력을 증가시키지 않고 채널 용량을 안테나 수에 비례하여 증가시킬 수 있는 것이다. 본 논문에서는 다중 안테나 시스템의 이론적 용량을 살펴보고, 이를 달성하기 위한 기법들을 소개한다. 다중안테나 기법은 다이버시티 이득을 얻어 전송 신뢰도를 높이는 방식들과, 전송률을 높이는 공간 다중화 방식, 그리고 이 두 가지를 결합한 방식 등으로 크게 나눌 수 있다. 끝으로 휴대 인터넷에 사용되는 다중안테나 기술을 다룬다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.11
• /
• pp.2521-2526
• /
• 2013

In this paper, a novel spatial modulation (SM) with transmit antenna selection (TAS) based on maximizing channel capacity is proposed. Comparing to the conventional TAS technique, the proposed TAS considers the channel capacity of the MIMO channel with antenna selection. The optimal antenna set selection is applied to SM by taking account of the all possible sets, and then, a sub-optimal antenna set selection is also proposed for reducing the computational complexity of the optimal method. Computer simulations show that the proposed TAS significantly outperforms the existing SM scheme based on the magnitude of the channel vectors in terms of bit error rate (BER) in various environments.

• Journal of Convergence for Information Technology
• /
• v.10 no.11
• /
• pp.23-29
• /
• 2020

As IoT devices increase exponentially, minimizing MIMO interference and increasing transmission capacity for sending and receiving IoT information through multiple antennas remain the biggest issues. In this paper, secret key-level distribution mechanism using deep learning is proposed to minimize MIMO-based IoT communication noise. The proposed mechanism minimizes resource loss during transmission and reception process by dispersing IoT information sent and received through multiple antennas in batches using deep learning. In addition, the proposed mechanism applied a multidimensional key distribution processing process to maximize capacity through multiple antenna multiple stream transmission at base stations without direct interference between the APs. In addition, the proposed mechanism synchronizes IoT information by deep learning the frequency of use of secret keys according to the number of IoT information by applying the method of distributing secret keys in dimension according to the number of frequency channels of IoT information in order to make the most of the multiple antenna technology.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.12
• /
• pp.1076-1084
• /
• 2012

In the CS/CB(Coordinated Scheduling/Beamforming) scheme, the cell edge user throughput is increased by selecting MIMO (Multiple Input Multiple Output) precoders which can minimize the interferences from adjacent base stations (BSs). However, in current LTE(Long Term Evolution) systems, the serving cell is selected in the initialization stage by using the synchronization signals and cell specific reference signals transmitted by adjacent BSs with a single antenna. The selected BS in the initialization stage may not be the best one since the MIMO precoding gain has not been considered in the cell selection stage. In this paper, a new cell selection technique is proposed for LTE systems with MIMO precoder by taking into account the effect of the precoder in the initialization stage. The proposed technique enables a user equipment (UE) in the cell boundary to select the serving BS by using the information (channel rank, effective channel capacity, and effective SINR(Signal to Interference plus Noise Ratio)) acquired from cell specific reference signals of candidate BSs. It is verified by computer simulation that the proposed technique can increase the channel capacity significantly in the multi-cell environments, compared with the conventional CS/CB scheme.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.1
• /
• pp.24-31
• /
• 2015

A differential codebook using M-ary phase shift keying (M-PSK) constellation as its codeword elements, is proposed for Long term evolution (LTE), LTE-Advanced (LTE-A), and/or WiMAX systems. Due to the temporal correlation of the adjacent channel, the consecutive precoding matrices are likely to be similar. This approach quantize only the differential information of the channel instead of the whole channel subspace, which virtually increase the codebook size to realize more accurate quantization of the channel. Especially, the proposed codebook has the same properties of LTE release-8 codebook that is, constant modulus, complexity reduction, and nested property. The mobile station can be designed by using a less expensive non-linear amplifier utilizing the constant modulus property. Computer simulations show that the capacity of the proposed codebook performs better than LTE release-8 codebook with the same amount of feedback information.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.5
• /
• pp.61-69
• /
• 2017

The study on interference channel is very important information theoretically and many studies have been done on it. However, even in the simplest case, even in the case of two user interfering channels, the channel capacity is not yet known except in special cases. Recently, research on the multiplexing gain that shows the tendency of the transmission rate in the high signal to noise ratio (SNR) band has been actively carried out, instead of accurately grasping the channel capacity. Obtaining optimal multiplexing gain can reveal trends in channel capacity at high signal-to-noise ratio bands. In an interfering channel with two users, the best multiplexing gain can be obtained by eliminating the interference. However, recent research shows that when the number of users is more than three, the optimal multiplexing gain can not be obtained only by zero forcing and a new technique called interference sorting is needed. There are two types of interference sorting techniques. Beamforming A method of effectively separating signals and interference by properly selecting matrices and constructing structured codes using rational numbers and irrational numbers. The interference alignment technique can achieve optimal multiplexing gain in various environments such as interference channel, X channel, compound broadcast channel, and multi hop network for multi source multi destination. In recent years, it has also been applied to distributed storage. Lee et al., "Lattice Code Interference Alignment in Cooperative Multipoint Transmission (COMP) for Interference Channels of Three Users", Journal of the Institute of Electronics Engineers, vol.49-TC,no.6,2012. In this paper, the DoF of delayed channel information is obtained.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.07a
• /
• pp.126-127
• /
• 2011

최근 다중 사용자 전송 기술에 관한 연구는 단일 사용자 MIMO 시스템에서의 선형적 용량증가가 다중 사용자 MIMO시스템에도 적용 될 수 있다는 것을 보여 주었다. 본 논문에서는 다중사용자 하향 채널에서 Vector Perturbation을 통해 성능 향상을 이끌어 내는 기법을 제안한다. 우리는 동시에 최대 다수의 사용자의 연결을 어느 정도 포기함으로써 서비스의 질(QoS)을 향상시키는데 중점을 두었다. 이렇게 희생한 사용자의 정보와 Perturbation 벡터를 적절히 이용하여 비트당에러율(BER)에서 큰 이득을 얻을 수 있었다. 모의 실험을 통해 Standard Vector Perturbation을 이용한 제안된 방법이 상당한 성능상 이득을 가져오는 것을 확인 할 수 있다.