• Journal of Aerospace System Engineering
• /
• v.15 no.3
• /
• pp.71-78
• /
• 2021

Since most functions of modern aircraft are controlled by software, software errors are directly related to aircraft safety. The criterion in Chapter 15 of the MIL-HDBK-516C addresses safe development and verification of military aircraft software. As the U.S. Air Force repeatedly experienced non-compliance with Chapter 15 criterion of the MIL-HDBK-516C, it published an Airworthiness Circular (AC-17-01) as a guide to meeting the criterion. In this paper, Chapter 15 of MIL-HDBK-516C, AC-17-01 and the SW Qualification Guideline (DO-178C) as applied by the Federal Aviation Administration are compared and analyzed. For the analysis, a matching ratio formula between the MIL-HDBK-516C criteria specified in AC-17-01 and the DO-178C specified in MIL-HDBK-516C criteria is defined. The sections that satisfy MIL-HDBK-516C criterion are derived when AC-17-01 or DO-178C matches. Based on the analysis results, the aircraft software development process is established and examples of application of Chapter 15 of MIL-HDBK-516C are addressed.

• Journal of Applied Reliability
• /
• v.17 no.2
• /
• pp.92-102
• /
• 2017

Purpose: Reliability prediction standards consider environmental conditions, such as temperature, humidity and vibration in order to predict the reliability of the electronics components. There are many types of standards, and each standard has a different failure rate prediction model, and requires different environmental conditions. The purpose of this study is to make a sensitivity analysis by changing the temperature which is one of the environmental conditions. By observing the relation between the temperature and the failure rate, we perform the sensitivity analysis for standards including MIL-HDBK-217F, RiAC-HDBK-217Plus and FIDES. Methods: we establish environmental conditions in accordance with maneuver weapon systems's OMS/MP and mission scenarios then predict the reliability using MIL-HDBK-217F, RiAC-HDBK-217Plus and FIDES through the case of DC-DC Converter. Conclusion: Reliability prediction standards show different sensitivities of their failure rates with respect to the changing temperatures.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.17 no.4
• /
• pp.25-31
• /
• 2009

In development phase of the Aircraft Systems, the reliability prediction of electronic equipments are usually performed using MIL-HDBK-217. The reliability of fielded electronic systems, however, used to be underestimated with MIL-HDBK-217. To solve this problem, some alternatives are suggested and Telcordia SR-332 is among them. In this case study, the reliability of ESU which controls gas turbine engine is predicted using Telcordia SR-332 along with the development test data. The predicted reliabilities of ESU using Telcordia SR-332 and MIL-HDBK-217 are also compared. As a result this case study showed that the predicted reliability using Telcordia SR-332 was better close to field(operation) reliability than MIL-HDBK-217.

• Aerospace Engineering and Technology
• /
• v.6 no.1
• /
• pp.1-6
• /
• 2007

The present study provides the compressive design allowable of a unidirectional glass/epoxy composite laminate processed by wet lay-up at room temperature. The compressive strength values measured from 39 specimens have been assumed to follow the two-parameter Weibull distribution. Following the statistical guidelines provided by MIL-HDBK-17F, the B-basis and A-basis values of the aforementioned laminate are found to be 82.6% and 65.9%, of the mean compressive strength, respectively. The B-basis value is then discounted further at 50% for the in-situ application on the main wing spar caps of an experimental canard aircraft.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.379-388
• /
• 2016

There are various system defects from weapons manufacturing due to the numerous production processes and various production environments. The first kind of defect is patent defects, which can be detected by visual inspection, functional testing, and existing quality control procedures during the manufacturing process. The second kind is latent defects, which cannot be detected though existing quality management approaches because of the complexity of the system and manufacturing process. To minimize the initial defect problems, environmental stress screening (ESS) is needed to detect the defects, remove them, and improve the product conditions based on the environmental stress conditions of temperature and vibration. We implemented a tool for quantitative ESS effectiveness analysis and profile design automation based on MIL-HDBK-344 and verified it using six scenarios with different temperature stress, vibration stress, and test designs.

• Journal of Aerospace System Engineering
• /
• v.16 no.1
• /
• pp.17-27
• /
• 2022

A certain level of stability margin airworthiness criteria should be met to secure robustness against uncertainties between the real plant and the model in a flight control system design. The U.S. Department of Defense (DoD) specification of MIL-F-9490D and airworthiness certification standard of MIL-HDBK-516B uses gain and phase margin criteria of flight control system. However, the same stability margin criteria is applied at all development phases without considering the design maturity of each development phase of the aircraft. Ultimately, a problem arises when the aircraft operation envelope is excessively restricted. This paper proposes the relation of handling qualities and stability margin, and presents re-established stability margin criteria as a development phases and verification methods. The results of the research study are considered to contribute to the verification of the stability margin criteria more flexibly and effectively by applying the method to not only the currently manned developing aircrafts but also the unmanned vehicle to be developed in the future.

• Journal of Aerospace System Engineering
• /
• v.7 no.4
• /
• pp.55-61
• /
• 2013

In recent years, NASA, FAA and the aerospace industry, through MIL-HDBK-17 and the NASA-conceived AGATE(Advanced General Aviation Transport Experiments) program, have worked together to reduce the qualification burden imposed on individual aircraft manufacturers. AGATE is one of the most successful public/private cost-haring partnerships ever conceived, bringing together academia, the FAA, other government agencies and industry to develop affordable new technologies and accompanying industry standards and certification methods. In 2005, NASA established NCAMP(National Center for Advanced Materials Performance) with the purpose of refining and enhancing the AGATE process to a self-sustaining level to serve the entire aerospace industry in partnership with CMH-17, FAA, and SAE. In this paper, I will introduce briefly NCAMP process and explain its organization structure and core NCAMP documents. This paper can provide some help in establishing our certification system for composite materials where the NCAMP process is expected to be the most good model.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.2
• /
• pp.34-40
• /
• 2003

This paper gives an assessment criteria and reliability improvement for high frequency power supply of high efficacy electrodeless fluorescent lamp. The electrodeless fluorescent lamp system consist of electrodeless fluorescent lamp, high frequency power supply and lighting fixtures. The high frequency power supply has a shortest life at the system. Therefore It is need th assess the Failure Rate or mean Time To Failure(MTTF) for the high frequency power supply of electrodeless fluorescent lamp system and improve the reliability at design. We suggest the assessment criteria and improve methods of the reliability on the design basis for the electodeless fluorescent system.