• Economic and Environmental Geology
• /
• v.25 no.3
• /
• pp.297-316
• /
• 1992

The Daebong gold-silver deposits is located in 8 km southwest of Cheongyang, Chungcheongnam-Do, Republic of Korea. The gold-silver-bearing hydrothermal quartz veins was formed within the Precambrian metasediments of Gyeonggi massif. Ore minerals occur as mainly of pyrite, sphalerite (0.78~6.19 wt.% Cd), galena, pyrrhotite and minor amounts of chalcopyrite, arsenopyrite, magnetite, ilmenite, chalcocite, electrum (55.00~89.55 wt.% Au) and argentite. The gangue minerals are quartz, calcite, chlorite, K-feldspar, biotite. Wall-rock alterations such as chloritization, silicification, pyritization, carbonatization and sericitization can be observed near the quartz veins. According to the mineral paragenetic sequence based on vein structure and mineral assemblages, three stage mineralizations can be recognized. Fluid inclusion, sulfur isotope and thermodynamic data show that the ore minerals were dominantly deposited at the between 388 and $204^{\circ}C$ from fluids with salinities of 8.1~0.3 wt.% equivalent NaCl, and sulfur isotope value 4.84 to 6.40 per mil of sulfides indicates igneous sources of sulfur in the hydrothermal system and fluid inclusion salinity data suggest that thermal fluids may have magmatic origin with some degree mixing of meteoric water.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.946-949
• /
• 2010

철강회사의 열연 Slab 표면의 폭 두께를 측정하여 공정시에 이들 측정 데이터를 이용하여 양질의 제품 생산을 위한 공정 제어에 이용하고 있다. 이 경우에 카메라를 사용하여 측정하거나 레이저 스캐너를 이용하여 측정하고 있다. 본 논문에서는 카메라와 레이저를 이용하여 폭 두께를 측정하는 시스템을 구축하고 이렇게 구축된 시스템에서 레이저빔과 LED광원을 사용하였을 때 물체의 실제 길이와의 측정오차를 비교한다. 그 결과 LED광원을 이용하였을 경우 레이저의 경우와 유사하나 가격이나 생산현장의 환경을 고려하면 보다 효과적이라 하겠다. 또한 정밀한 측정을 요구할 경우 이 두 광원을 동시에 사용하면 양호한 결과를 얻을 수 있게 된다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.629-635
• /
• 2019

In this study, we analyzed the effect of FAN and oil cooler application on APU. MIL-STD-810 was applied to the atmospheric environment and radiation dose in order to perform thermal flow analysis. The heat flow was analyzed for the case in which the inlet / outlet fan was applied (Case 1), the case in which the inlet fan and the oil cooler were applied (Case 2), and the case in which the inlet / outlet fan and the oil cooler were applied (Case 3). As a result, it was confirmed that the cylinder head temperature of Case 3 was 21.4 times lower than that of Case 1 and 8.0 times lower than that of Case 2. Experiments were conducted under the same ambient conditions in order to examine the validity of the results. The numerical values and experimental results showed a difference of less than 7%. Through this, we were able to confirm that the APU heat flow optimization model satisfies the design conditions. The results of this study are expected to be used as basic data for optimizing heat flow of APU.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.10
• /
• pp.186-194
• /
• 1996

The SliM (sliding memory plane) array processor has been proposed to alleviate disadvantages of existing mesh-connected SIMD(single instruction stream- multiple data streams) array processors, such as the inter-PE(processing element) communication overhead, the data I/O overhead and complicated interconnections. This paper presents the deisgn and implementation of SliM image processor ASIC (application specific integrated circuit) chip consisting of mesh connected 5 X 5 PE. The PE architecture implemented here is quite different from the originally proposed PE. We have performed the front-end design, such as VHDL (VHSIC hardware description language)modeling, logic synthesis and simulation, and have doen the back-end design procedure. The SliM ASIC chip used the VTI 0.8$\mu$m standard cell library (v8r4.4) has 55,255 gates and twenty-five 128 X 9 bit SRAM modules. The chip has the 326.71 X 313.24mil$^{2}$ die size and is packed using the 144 pin MQFP. The chip operates perfectly at 25 MHz and gives 625 MIPS. For performance evaluation, we developed parallel algorithms and the performance results showed improvement compared with existing image processors.

• Korean Journal of Materials Research
• /
• v.31 no.8
• /
• pp.465-470
• /
• 2021

Deuterium is a crucial clean energy source required for nuclear fusion and is a future resource needed in various industries and scientific fields. However, it is not easy to enrich deuterium because the proportion of deuterium in the hydrogen mixture is scarce, at approximately 0.016 %. Furthermore, the physical and chemical properties of the hydrogen mixture and deuterium are very similar. Therefore, the efficient separation of deuterium from hydrogen mixtures is often a significant challenge when using modern separation technologies. Recently, to effectively separate deuterium, studies utilizing the 'Kinetic Quantum Sieving Effect (KQS)' of porous materials are increasing. Therefore, in this review, two different strategies have been discussed for improving KQS efficiency for hydrogen isotope separation performance using nanoporous materials. One is the gating effect, which precisely controls the aperture locally by adjusting the temperature and pressure. The second is the breathing phenomenon, utilizing the volume change of the structure from closed system to open system. It has been reported that efficient hydrogen isotope separation is possible using these two methods, and each of these effects is described in detail in this review. In addition, a specific-isotope responsive system (e.g., 2nd breathing effect in MIL-53) has recently been discovered and is described here as well.

• Korean Journal of Medicinal Crop Science
• /
• v.8 no.4
• /
• pp.291-296
• /
• 2000

To evaluate the biological effects of boxthorn (Lycium chinense Mill.) extracts on the immune response systems, the mitogenic effects were tested by LPS (lipopolysaccharide) and Con A (concanavalin A) using water extracts from various parts of Lycium chinense Mill. The proliferation of B-lymphocytes which were activated by the mitogen, LPS, was markedly increased in the concentration of 0.1mg/ml to 0.5mg/ml, but inhibited in more than 0.5mg/ml. It increased only proliferation of B-lymphocytes but not that of T-lymphocytes by Con A. There was no difference between boxthorn species in immune response. Water extracts of various parts in boxthorn enhanced the humoral immune response which was related to B-lymphocytes.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.1
• /
• pp.60-71
• /
• 2019

Electrical power supply is needed to operate the radar system in the field. In addition, it should not cause performance deterioration under the environmental factors due to characteristics of military equipment, and should not cause malfunction due to electromagnetic waves generated in radar, and then should not cause malfunction in radar equipment. Therefore, By applying a permanent magnet to the rotor of the generator, light weighting and high efficiency of generator were achieved. As a result, electrical performance test of the generator, the rated output power was 80.8 kW, the maximum output power was 88.1 kW, and the output power efficiency was 98.1 % under the full load condition. When the load capacity of the generator was changed from no load to full load, the maximum voltage variation was 3.6 % and the frequency variation was 0.3 %. As a result of the transient response test for measuring the output power of the generator according to the load characteristics change, the maximum voltage variation of 7.9 %, frequency variation of 0.5 % were confirmed, and the transient response time was 2.1 seconds. Environmental tests were conducted in accordance with MIL-STD-810G and MIL-STD-461F to evaluate the operability of the generator groups. Normal operation of radar system generator group was confirmed under high temperature and low temperature environment conditions. Electromagnetic tests were conducted to check if electromagnetic wave generated from both radar system and generator group in operation caused any performance deterioration to each other. As a result, it was confirmed that the performance deterioration due to electromagnetic wave inflow, radiation, and conduction did not occur. It is expected that it should be possible to provide high efficiency power supply and stable power supply by applying to various military system as well as radar system.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.5
• /
• pp.629-637
• /
• 2016

This paper presents a ballistic limit velocity measurement using the support vector machine that classifies two classes, the partial penetration and the complete penetration, by generating a linear separating hyperplane that equally divides the classes. For the ballistic limit velocity measurement, the previous methods(MIL-STD-662F and NIJ-STD-0101.06) have required a large number of experiments that caused high cost and time. However, the proposed method is not only flexible, requiring 0.85 ~ 4.8 times fewer experiments but also reliable, providing less than 2 % difference in results compared to the previous methods. For its validation, live fire experiments were conducted using various thickness SS400 iron plates as a target and two different types of live bullets such as 5.56 mm M193 and 7.62 mm M80.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.167.2-167.2
• /
• 2012

경희대학교와 UC Berkeley, Imperial College London에서 공동으로 진행하는 TRIO-CINEMA Mission(TRiplet Ionosphere Observatory-Cubesat for Ion, Neutral, Electron and MAgnetic fields)은 총 3기의 초소형 위성으로 구성되어 있다. 3기의 위성은 고도 650~800km 상공의 태양동주기 궤도운동을 예상하고 있으며, 지구 근접공간의 입자 검출과 자기장 측정의 과학 임무를 맡게 된다. TRIO-CINEMA 비행 모델(Flight Model)의 환경시험은 진동시험과 열진공시험으로 진행되었다. 진동시험은 X, Y, Z 세 축에 대해 Sine 과 Random 모드로 진행되었다. TRIO-CINEMA가 탑재 될 러시아의 드네프르 로켓의 요구사항은 각 축에서 20Hz 이상의 고유진동수, Sine의 경우 최대 0.8G와 4oct/min Sweep Rate, Random의 경우 5.2Grms 와 35초의 지속시간에서의 안정성을 만족하는 것이다. 시험 결과 TRIO-CINEMA가 요구사항을 모두 만족시키는 것을 확인하였다. 또한, 열 주기 시험(Thermal Cycling Test)을 진행하여 우주공간에서 위성 시스템이 정상 동작하는지에 대한 신뢰성을 검증하였다. 열주기 시험은 미국 MIL표준 값을 참고하여 $10^{-6}Torr$에서 $-20{\sim}30^{\circ}C$의 온도를 주었으며, 시험을 진행하는 동안과 시험 후에 위성이 정상작동 함을 확인하였다. 이에 본 연구의 시험 방법과 그 결과를 기술하였다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.4
• /
• pp.91-99
• /
• 2022

By applying METHOD 514.8 of the US military standard MIL-STD-810H, vibration analysis of the winding core automatic feeding device was performed during vehicle transportation. The contact point between the LM guide and main support frame was weak in the vertical axis, transverse axis, and longitudinal axis during the transportation of the automatic winding core feeder vehicle, and the maximum equivalent stress was 236.31 MPa in the longitudinal axis. When random vibration was applied, the safety margin in the longitudinal direction was 0.26, indicating low safety. The safety margin was changed by increasing the damage factor to 0.1. Finally, the safety margin was improved to 3.48 to secure safety. Resonance occurred with a Q factor of 9.34 in the harmonic response to which the RMS value of the ASD data was input, and the vertical axis safety margin was derived as 0.16. When the damping factor was 0.15, the Q factor was 3.37, and resonance was avoided with a safety margin of 6.62.