• 한국문헌정보학회지
• /
• 제17권
• /
• pp.85-103
• /
• 1989

The purpose of this second one of the two consecutive papers, which carried out for the research, is to evaluate their relative effectiveness regarding instruction with such three presentation methods as video/print+ lecture, print/video, print+lecture/video, with which the library of Duk Sung Women's University applied already for the orientation of the freshmen in 1988. In sum, the major research findings are as follows : First, as the more numerous media were applied for the orientation, the instruction were more effective. Second, it is very interesting to find out that there were wide differences in effectiveness among the three presentation methods applied for the student. Especially, the print+ lecture/video method was more effective in the instruction than the print/video method. Surprisingly, the video/print + lecture method was much more effective than the print+ lecture/video method. With the research findings of this two consecutive papers into consideration, it seems safe to say that the video-tape method was most effective among such three orienting methods as lecture, slide-tape, and video tape, and the video/print+lecture method was most effective among such three presentation methods as video/print+lecture, print/video, and print+lecture/video.

• Nuclear Engineering and Technology
• /
• 제52권1호
• /
• pp.115-122
• /
• 2020

A promising method for removal of Cs ions from water and their incorporation into stable crystal structure ready for safe and permanent disposal was described. Cs-exchanged X zeolite was hot-pressed at temperature ranging from 800 to 950 ℃ to fabricate dense pollucite ceramics. It was found that the application of external pressure reduced the pollucite formation temperature. The effect of sintering temperature on density, phase composition and mechanical properties was investigated. The highest density of 92.5 %TD and the highest compressive strength of 79 MPa were measured in pollucite hot-pressed at 950 ℃ for 3 h. Heterogeneity of samples obtained at 950 ℃ was determined using scanning electron microscopy. The pollucite hot-pressed at 950 ℃ had low linear thermal expansion coefficient of ~4.67 × 10^-6 K^-1 in the temperature range from 100 to 1000 ℃.

• 미생물학회지
• /
• 제54권3호
• /
• pp.295-298
• /
• 2018

Lactobacillus plantarum은 그람 양성, 비운동성의 이형발효세균이며, 다양한 환경에서 서식하고 있다. L. plantarum SK151은 장관상피세포 흡착능이 우수한 균주로서, 김치로부터 분리되었다. SK151 균주의 유전체 길이는 3,231,249 염기쌍이며, G + C 함량은 44.6%이었다. SK151 균주의 유전체에는 비타민 B2 (리보플라빈) 생합성에 필요한 유전자군이 완벽하게 존재하고 있었으며, 세포 흡착과 관련된 유전자도 다수 존재하고 있었다.

• Asian Journal of Business Environment
• /
• 제7권2호
• /
• pp.31-38
• /
• 2017

Purpose - While microfinance institutions(MFIs) from Bangladesh, such as Grameen Bank, received worldwide recognition and the Nobel Peace Prize in 2006, however, there is a paucity of research that provided a comprehensive discussion on the characteristics of the microfinance industry. Hence, the aim of this paper is to discuss some important aspects of the microfinance sector in Bangladesh. Research design, data, and methodology - This study used secondary sources of data, such as annual reports of the Microcredit Regulatory Authority (MRA) and the World Bank database in its descriptive analysis. Results - This study found that Bangladesh has made remarkable progress in her socio-economic and economic development in the last few decades. It is also generally perceived that microfinance has placed significant contribution on such socio-economic development. While microfinance observed unprecedented growth domestically, however, the regulatory framework is still rather weak, and a majority of the MFIs are found to be concentrated in the well-off areas (e.g., Dhaka, Chittagong etc.). Conclusions - The findings are significantly important for the parties who are interested to know the microfinance sector in Bangladesh. To some extent, the findings of this study will provide policy implications that may benefit the industry.

• The Journal of Asian Finance, Economics and Business
• /
• 제6권1호
• /
• pp.241-248
• /
• 2019

The purpose of this study is to investigate empirical evidences of productivity of life insurance institutions in Malaysia. Therefore, this study attempts to explore the productivity of the life insurance institutions in Malaysia. The overall findings show that the total factor productivity (TFP) has progressed by 2.5% per year during the study period from 2012 to 2016 in the Malaysian insurance industry. However, TFP change has declined from 2012 to 2015 and observed a negative growth in 2015-16 (3.3%). The highest productivity progress was documented during 2012-13 at a rate of 11.7% while the minimum productivity progress was during 2014-15 (only 0.2%). The results also indicate that the decomposition of TFP found that overall progress could mainly be attributed to technological change (TC). However, technical efficiency change (TEC) and pure technical efficiency change (PTE) have negative impact on TFP. The findings also show that most of the insurance companies have a steady growth. Therefore, this study will contribute new insights for the policy makers and insurance institutions to take appropriate steps in developing relevant policies for increasing productivity of insurance institutions in Malaysia.

• Nuclear Engineering and Technology
• /
• 제51권4호
• /
• pp.1069-1074
• /
• 2019

A novel fabrication method of oxide dispersion strengthened (ODS) steel cladding tubes for advanced fast reactors has been investigated using the cold spray powder-based materials deposition process. Cold spraying has the potential advantage for rapidly fabricating ODS cladding tubes in comparison with the conventional multi-step extrusion process. A gas atomized spherical 14YWT (Fe-14%Cr, 3%W, 0.4%Ti, 0.2% Y, 0.01%O) powder was sprayed on a rotating cylindrical 6061-T6 aluminum mandrel using nitrogen as the propellant gas. The powder lacked the oxygen content needed to precipitate the nanoclusters in ODS steel, therefore this work was intended to serve as a proof-of-concept study to demonstrate that free-standing steel cladding tubes with prototypical ODS composition could be manufactured using the cold spray process. The spray process produced an approximately 1-mm thick, dense 14YWT deposit on the aluminum-alloy tube. After surface polishing of the 14YWT deposit to obtain desired cladding thickness and surface roughness, the aluminum-alloy mandrel was dissolved in an alkaline medium to leave behind a free-standing ODS tube. The as-fabricated cladding tube was annealed at $1000^{\circ}C$ for 1 h in an argon atmosphere to improve the overall mechanical properties of the cladding.

• 무역학회지
• /
• 제44권3호
• /
• pp.137-154
• /
• 2019

This study analyzes the major provisions of the UK Insurance Act 2015 and Marine Insurance Act 1906 on the duty of disclosure under the doctrine of utmost good faith. Marine insurance contracts are based on "utmost good faith" and one aspect of this is that MIA 1906 imposes a duty on prospective policy holders to disclose all material facts. In the Insurance Act 2015 of the United Kingdom, the contents of the precedent were enacted such that we have borrowed the legal principles of common law until now. The insurer is required to more actively communicate with the insurer rather than passively underwriting and asking questions of the insured. The Act details the insured's constructive knowledge of the material circumstance by reviewing the current case law and introduces a new system for the insurer's proportionate remedy against the insured's breach of the duty of fair presentation of risk. This is a default regime, which may be altered by agreement between the parties.

• Journal of Preventive Medicine and Public Health
• /
• 제55권5호
• /
• pp.444-454
• /
• 2022

Objectives: We aimed to identify the factors related to depression and quality of life in patients with hypertension by using multilevel regression analysis. Methods: In 2019, 229 043 participants in the Korean Community Health Survey were selected as the study group. Individual factors were identified using data from the 2019 Community Health Survey. Regional factors were identified using data from the National Statistical Office of Korea. Multilevel regression analysis was conducted to find individual and local factors affecting depression and quality of life in patients with hypertension and to determine any associated interactions. Results: As individual factors in patients with hypertension, women, those with lower education-levels, recipients of basic livelihood benefits, and those with poor dietary conditions showed stronger associations with depression and quality of life. As regional factors and individual-level variables in patients with hypertension, lower gross regional personal income, fewer doctors at medical institutions, and lower rates of participation in volunteer activities presented stronger associations with depression and quality of life. In addition, the associations of depression with gross regional personal income, the number of doctors at medical institutions, and dietary conditions were significantly stronger in patients with hypertension than in patients without hypertension. The associations of gender and employment status with quality of life were also significantly greater. Conclusions: Policy interventions are needed to adjust health behaviors, prevent depression, and improve quality of life for patients with hypertension, especially for those with the risk factors identified in this study.

• Journal of Information Science Theory and Practice
• /
• 제11권1호
• /
• pp.1-13
• /
• 2023

This study determines how social media users (SMUs) verify the information they come across on the Internet. It determines SMUs' perception of online fact-checking services in terms of their ease of use, usefulness, and trust. By conducting a focus group discussion and key informant interviews, themes were derived in determining fact-checking practices while a survey was further conducted to determine such perceived ease of use, usefulness, and trust in fact-checking services. The thematic analysis revealed major information verification practices, such as cross-checking and verifying with other sources, inspecting comments and reactions, and confirming from personal and social networks. The results showed that SMUs considered fact-checking services easy to use. However, a concern was raised about their usefulness stemming from the delayed action in addressing the information issues that need to be verified. As to perceived trust, it was found that SMUs have reservations about fact-checking services. Finally, it is believed that fact-checking services are expected to be credible and need to be promoted to mitigate any form of fake news, particularly on social media platforms.

• 무역학회지
• /
• 제45권5호
• /
• pp.279-301
• /
• 2020

In the absence of any guidance under statutory law, such as the Rules for Construction of Policy, MIA 1906, judges should follow the general principles of interpretation that apply to all contracts. In simple terms, Contra Proferentem Rule means that if the contents of the terms and conditions are ambiguous, they are interpreted against the writer of the terms and conditions. In the Anglo-American Contract Law, the 'default rule' is an important judicial tool that can supplement defects in contract norms and reinforce the principle of private autonomy through gap-filling techniques related to the interpretation of contracts. In Korea, it is sometimes mentioned in case of precedent, and it has been established as a clear rule. This study analyzes the interpretation of terms and conditions is not in the form that the interpretation of other general contracts and other interpretation principles are valid, but contracts based on terms and conditions are also contracts, and as a general rule, the interpretation of terms and conditions is explained like the general contract interpretation.