• Title/Summary/Keyword: MG paper

Search Result 1,088, Processing Time 0.028 seconds

A empirical study on the Employee's Workplace Satisfaction for Insurance Claim adjusting company (손해사정회사 종업원의 직장만족 결정요인 연구)

  • Kim, Jaetae;Yoo, kyungjin;Choi, Youngjin;Kim, Jongwon
    • Journal of the Society of Disaster Information
    • /
    • v.11 no.2
    • /
    • pp.245-252
    • /
    • 2015
  • Employee's workplace satisfaction of claim adjusting company, who assesses the loss of catastrophe, have a direct influence on the loss evaluation job. Eventually their satisfaction would affect the compensation satisfaction of victims, therefore it is one of important factors for victims's compensation satisfaction. This paper analyzes empirically the determinants of employee's satisfaction to their firm for a claim adjusting company. As a result of the empirical research, it is found that the statistically significant determinant are the psychological factor, the organizational factor, and the individual factor. Among the significant factors, the psychological factor has the biggest positive factor. And the organizational factor and the individual factor is next with similar positive measurement. But the cognitive factor is not statistically significant. A claim adjusting company may use the research result for the improvement of employee's workplace satisfaction.

Optical imaging methods for qualification of superconducting wires

  • Kim, Gracia;Jin, Hye-Jin;Jo, William
    • Progress in Superconductivity and Cryogenics
    • /
    • v.16 no.4
    • /
    • pp.21-25
    • /
    • 2014
  • In order to develop 2nd generation (2G) high-temperature superconducting (HTS) wires as commercial products, it is necessary to perform a high speed investigation of their superconducting performance. Room-temperature and non-contact optical scanning tools are necessary to verify the microstructure of the superconducting materials, the current flow below the critical temperature, and the critical current density. In this paper, we report our results of an inspection of the electrical transport properties of coated conductors. The samples that we used in our study were highly qualified rare-earth based coated conductors produced via co-evaporation, and $SmBa_2Cu_3O_{7-y}$ (SmBCO) was the superconducting materials used in our studies. A film grown on IBAD-MgO templates shows larger than 400 A/cm at 77 K and a self-field. The local transport properties of the films were investigated by room-temperature imaging by thermal heating. The room-temperature images show structural inhomogeneities on the surface of the films. Bolometric response imaging via low-temperature bolometric microscopy was used to construct the local current mapping at the surface. These results indicate that the non-uniform regions on the surface disturb the current flow, and laser scanning images at room-temperature and at a low-temperature suggest a correlation between the structural properties and transport properties. Thus this method can be effective to evaluate the quality of the coated conductors.

Reaction Condition for Biodiesel Production from Animal Fats (동물성 유지를 이용한 바이오디젤 생산의 반응조건)

  • Yang, Hee-Seung;Jeong, Gwi-Taek;Park, Suk-Hwan;Park, Jae-Hee;Park, Don-Hee
    • KSBB Journal
    • /
    • v.22 no.4
    • /
    • pp.228-233
    • /
    • 2007
  • The high cost and lack of vegetable oil are limiting the expansion of biodiesel production. The purpose of research was to investigate the potential of animal fats as biodiesel feedstock. In this paper, transesterification using alkali catalyst and methanol was performed to reaction, we carried out experiments that it was changed variables as reaction temperature, methanol molar ratio, catalyst types, amount of catalyst and reaction time. The optimum reaction condition for biodiesel production was reaction temperature 65$^{\circ}C$, potassium hydroxide 1.0% (w/w), oil to methanol molar ratio 1:15 and reaction time 20 min. In this reaction condition, the contents of fatty acid methyl ester was reached to about 98.7%. Also, properties of biodiesel were measured to correspond to domestic quality standard of acid values, density and viscosity.

A study of characteristics for Image sticking in AC - Plasma Display Panel

  • Han, Yong-gyu;Lee, S.B.;Jeong, S.H.;Son, C.G.;Yoo, N.L.;Lee, H.J.;Lim, J.E.;Lee, J.H.;Jeoung, J.M.;Ko, B.D.;Oh, P.Y.;Moon, M.W.;Choi, Eun-Ha
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 2005.07a
    • /
    • pp.263-265
    • /
    • 2005
  • In the alternative current plasma display panel(AC-PDP) technology, it is very important to remove the image sticking for improving an image quality. In this paper, we have investigated the driving method of alternative current plasma display panel(AC-PDP) for preventing image sticking. We have investigated the driving method of alternative current plasma display panel(AC-PDP) for preventing image sticking. The preventing method of image sticking was proposed by adopting the Sticking Remove Pulse(SRP). The variation of brightness is most affected by the MgO to be formed at the surface of the phosphor layer. As a result, the image sticking is reduced when the driving method adopted an SRP.

  • PDF

Zone-Based Wireless Link-K Network Structure and Routing for Supporting Mission Group (작전임무그룹 지원을 위한 Zone 기반 무선 Link-K 네트워크 구조 및 라우팅)

  • Cheon, Minhwan;Baek, Hoki;Jee, Seungbae;Kim, Sangjun;Lim, Jaesung
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.42 no.1
    • /
    • pp.108-120
    • /
    • 2017
  • To this end, the ROK military is developing a Korean Tactical Data Link (Link-K) in two stages: Basic and Completion types. Currently, the basic type of the Link-K has a limitations for supporting Mission Group(MG)s, such as to share unnecessary information and inefficient routing, because all RICCs simply broadcasts the same information in the basic type of the Link-K. In this paper, we propose a Zone-based Wireless Link-K network structure and a routing algorithm. To improve the effectiveness of the proposed routing algorithm, we have studied a filtering method that adjusts the message data according to the priority of the message and a method of controlling the load of the network. In order to evaluate the performance of the proposed scheme, it is proved that it is effective to support the mission task group compared with the existing wireless Link-K routing algorithm according to the operational scenario situation.

Studies on the Biological .active Substance Produced by a Strain of Streptomyce sp Part II. Biochemical Specificity (Streptomtyces속 균주가 생성한 물질의 생물활성에 관한 연구 제 II 보 생화학적 작용 특이성)

  • 송방호;서정훈
    • Microbiology and Biotechnology Letters
    • /
    • v.3 no.2
    • /
    • pp.69-72
    • /
    • 1975
  • Isolation of the toxic substance which was produced by Streptentyces sp. and it's biorhemical characterestics and toxicity to fishes were reported in the previous paper. The present report includes antibiotic activity of the substance, inhibitory activity of the substance on the succinic dehydrogenase of fishes, and its effect on the blood corpuscles of a rabbit. An evident antibiotic activity of this substance was observed on Candida yeasts, but n$ot^1$on molds or bacteria. The substance inhibited the growth of Candida japonica and C. utilis to the 50% at the concentrations of 7.5 and 10.2ug per ml, respectively. The activity of succinic dehydrogenase obtained from various organs of Cyprinous carpio L. was also found to be inhibited by this substance. Original activities of the enzymes from tht brain, kidney, and liver, were inhibited by 75.4%, 38.2%, and 26.2%, respectively, but not the enzymes from the heart and spleen. Neither leukopenia nor leukocytosis was detected after the intravenous administration of the substince to the rabbit at the level of 6 mg per 2 kg body weight.

  • PDF

A Novel Approach for Sericin-Conjugated Silver Nanoparticle Synthesis and Their Potential as Microbicide Candidates

  • Lv, Xiaowen;Wang, Huanru;Su, Airong;Chu, Ying
    • Journal of Microbiology and Biotechnology
    • /
    • v.28 no.8
    • /
    • pp.1367-1375
    • /
    • 2018
  • Silver nanoparticles have been widely applied for biomedical areas owing to their potent antiviral and antibacterial activities. Synthesis of silver nanoparticles using biomacromolecules is more efficient, environment-friendly, and cost-saving compared with the traditional approach. In this paper, a novel approach was developed to establish a reaction system with $Ag^+-BH4^--sericin$ to synthesize silver nanoparticles conjugated to sericin (AgNPs-Sericin). Sericin could be as a good dispersant and stabilizing agent, which is able to modify nanoscaled AgNPs, the average diameter of which was only $3.78{\pm}1.14nm$ prepared in a 0.3 mg/ml sericin solution. The characterizations of the AgNPs-Sericin were determined by FTIR, thermogravimetry, and XRD analyses. The results showed that the synthesized AgNPs conjugated with sericin as organic phase. Via SAED and XRD analysis, we showed that these AgNPs formed polycrystalline powder with a face-centered cubic structure of bulk metals. Moreover, we investigated the antiviral and antibacterial activities of AgNPs-Sericin, and the results showed that AgNPs-Sericin exhibited potent anti-HIV-1 activity against CCR5-tropic and CXCR4-tropic strains, but no significant cytotoxicity was found toward human genital epithelial cells compared with free silver ions, which are accepted as a commonly used potent antimicrobial agent. Moreover, its antibacterial activity was determined via flow cytometry. The results showed that AgNPs-Sericin could suppress gram-negative (E. coli) and gram-positive (S. aureus) bacteria, but more was potent for the gram-negative one. We concluded that our AgNPs-Sericin could be a potential candidate as a microbicide or antimicrobial agent to prevent sexually transmitted infections.

Effects of the Atmosphere on the Comparative Solderability of Lead-Tin and Lead-Free Solders

  • Bin, Jeong-Uk;S.M.Adams;P.F.Stratton
    • Proceedings of the International Microelectronics And Packaging Society Conference
    • /
    • 2001.04a
    • /
    • pp.45-47
    • /
    • 2001
  • Due to pressure from threatened legislation in Europe, consumer and governmental pressure in Japan, and glob머 market considerations in the US, there is a rapidly growing interest in lead-free solderinger, Although the move to lead free soldering seems inevitable, many problems will arise in production assembly. It is generally acknowledged that the lead-free solders available offer a much s smaller process window than lead/tin, related mainly to the higher soldering temperatures which naturally result from increases of liquidus temperatures of at least 300 C. However, raising reflow temperatures from the current 220-2300 C to 250 2600 C will lead to problems with the boards and components as well as i increasing oxidation effects. There is a need to keep reflow temperatures low without reducing solderablity. Some results on benefits of inert atmospheres are discussed in this paper. For example, testing in a nitrogen atmosphere, with 300 ppm oxygen, by the N National Physical Laboratory (NPU has revealed clear benefits for ine$\pi$mg lead-free alloys, by restoring the solderability to lead/tin levels, by enabling lower soldering temperatures. However, there has been little testing over a range of oxygen levels in nitrogen and this is an important issue in determining n nitrogen supply and oven costs. Some results are reported here from work by NPL conducted for BOC in w which solderability was evaluated for tin기ead and tin/silver/copper eutectic a alloys in a wetting balance over a range of oxygen levels form 10 ppm to 21% ( (air). The studies confirm that acceptable wetting times occur in inert atmospheres a at soldering temperatures 20 to 300 C lower than are possible in air.

  • PDF

Bioequivalence of Commercially available Sustained Release Tablets of Diltiazem Hydrochloride (시판 염산 딜티아젬 서방형 정제의 생물학적 동등성)

  • Lee, Young-Bok;Koh, Ik-Bae;Seo, Se-Min;Yoon, Heong-Tung
    • Korean Journal of Clinical Pharmacy
    • /
    • v.3 no.1
    • /
    • pp.79-88
    • /
    • 1993
  • Bioequivalence(BE) test of commercially available sustained release tablets of diltiazem hydrochloride(DTZ) was performed to give some guidelines to BE test in korea in case of which drugs with low oral bioavaiiability(BA) due to substantial first-pass hepatic loss form pharmacologically active metabolites. In such cases, the pharmacologic activity after oral administration is greater than anticipated from BA data, based on chemical assay of drug alone. Therefore, this paper explores the use and meaning of area under the plasma concentration-time(AUC) data of parent and its metabolites to access BA if sustained release tablets. Normal healthy male volunteers(n=14) were randomly divided into 2 groups, and sustained release reference$(Herbesser^{(R)})$ and test$(Herben^{(R)})$ tablets of DTZ-30mg were given orally by balanced two-period cross-over dosing schedule. The plasma concentration of DTZ and and its active metabolite, desacetyldiitiazem(DAD), were determined by high performance liquid chromatography, and, $AUC_{DTZ},\;AUC_{DAD},\;AUC_{DTZ+DAD},\;C_{max}\;and\;T_{max}$ obtained. Analysis of varlance(ANOVA) showed that $AUC_{DTZ}\;and\;C_{max}$ passed the standard $(\alpha=0.05,\;1-\beta\geq0.8,\;\Delta\leq0.2)$ of BE test of korea, but $AUC_{DAD}$ was not satisfied from the standpoint of power. On the other hand, $AUC_{DTZ\midDAD}$ may be more avaliable than $AUC_{DAD}$ from the standpoint of statistics and pharmacologic equivalence.

  • PDF

A Study for Improving Properties of Antiwashout Underwater Concrete Mixed with Mineral Admixtures (광물질 혼화재를 혼합한 수중불분리성 콘크리트의 물성 향상을 위한 연구)

  • 문한영;신국재;이창수
    • Journal of the Korea Concrete Institute
    • /
    • v.14 no.3
    • /
    • pp.409-419
    • /
    • 2002
  • Nowadays, antiwashout underwater concrete is widely used for constructing underwater concrete structures but they, especially placed in marine environment, can be easily attacked by chemical ions such as SO$\^$2-/$\_$4/ Cl$\^$-/ and Mg$\^$2+/, so the quality and capability of concrete structures go down. In this paper, to solve and improve those matters, flyash and GGBFS(ground granulated blast furnace slag) were used as partial replacements for ordinary portland cement. As results of experiments for fundamental properties of antiwashout underwater concrete containing 10, 20, 30% of flyash and 40, 50, 60 % of GGBFS respectively, setting time, air contents, suspended solids and pH value were satisfied with the "Standard Specification of Antiwashout Admixtures for Concrete" prescribed by KSCE, and also slump flow, efflux time and elevation of head were more improved than that of control concrete. From the compressive strength test, it was revealed that the antiwashout underwater concrete containing mineral admixtures(flyash and GGBFS) is more effective for long term compressive strength than control concrete. An attempt to know how durable when they are under chemical attack has also been done by immersing in chemical solutions that were x2 artificial seawater, 5 % sulphuric acid solution, 10%, sodium sulfate solution and 10% calcium chloride solution. After immersion test for 91days, XRD analysis was carried out to investigate the reactants between cement hydrates and chemical ions and some crystalline such as gypsum ettringite and Fridel′s salt were confirmed.