• Transactions of Materials Processing
• /
• v.20 no.3
• /
• pp.229-235
• /
• 2011

The formability of magnesium alloy sheets at room temperature is generally low because of the inherently limited number of slip systems, but higher at temperatures over $150^{\circ}C$. Therefore, prior to the practical application of these materials, the forming limits should be evaluated as a function of the temperature and strain rate. This can be achieved experimentally by performing a series of tests or analytically by deriving the corresponding modeling approaches. However, before the formability analysis can be conducted, a model of flow stress, which includes the effects of strain, strain rate and temperature, should be carefully identified. In this paper, such procedure is carried out for Mg alloy AZ31 and the concept of flow stress surface is proposed. Experimental flow stresses at four temperature levels ($150^{\circ}C$, $200^{\circ}C$, $250^{\circ}C$, $300^{\circ}C$) each with the pre-assigned strain rate levels of $0.01s^{-1}$, $0.1s^{-1}$ and $1.0s^{-1}$ are collected in order to establish the relationships between these variables. The temperature-compensated strain rate parameter which combines, in a single variable, the effects of temperature and strain rate, is introduced to capture these relationships in a compact manner. This study shows that the proposed concept of flow stress surface is practically relevant for the evaluation of temperature and strain dependent formability.

• Journal of Environmental Science International
• /
• v.20 no.7
• /
• pp.845-855
• /
• 2011

The aim of this paper is to correlate the release characteristics of marine and lake sediment with their vicinal oxic conditions. We performed lab-scale simulation experiments using field sediment and water in order to compare the release concentrations and the release rates one another. To provide a few different kinds of oxic environments we used natural air flow and some oxygen releasing compounds such as $CaO_2$ and $MgO_2$. In case of phosphates, in each oxic condition, removal of phosphorus via biological activity and that via salt precipitation with the metal ions lowered the release rates. The behavior of the nitrogen-origin salts seemed to greatly depend on the typical biological actions - growth of biomass, nitrification, and partial denitrification. Generally speaking, the control of releases of $NH_3$-N, $PO_4$-P, T-N and T-P was successful under the oxic conditions meanwhile COD, nitrates and nitrites were difficult to reduce the releases into the bulk water because of the considerable microbial oxidation. Based on typical diffusive mass transfer kinetics the changes of concentrations of the nutrients were computed for qualitative and quantitative comparisons.

• Journal of Pharmaceutical Investigation
• /
• v.22 no.2
• /
• pp.155-161
• /
• 1992

Although glycosylated liposomes have attracted much attention as targeting delivery systems (DDS) of drugs to specific organs which have glycoside receptors, physical instability of liposomes greatly limits their practical application. In this case, proliposomes might be a potential answer to solve this problem. Utilizing the proliposomes as tageting DDS has been a goal of our series of works; we have tried to develop DDS which form liposomes uppon adding water and can deliver drugs to specific target organs/cells such as hepatocytes. In this paper, preparation of glycosylated liposomes and binding of the liposomes with lectin (agglutinin RCA 120) was studied. Asialoletuin (AF) was selected as a model compound which has galactose terminal and is favorable for binding with galactose receptor on the surface of hepatocytes. AF was obtained by splitting the terminal N-acetylneuraminic acid (NANA) of fetuin. Small unilamellar AF-liposomes were prepared by mixing aqueous solution of AF-palmitate with thin film of phosphatidyl choline and cholesterol (30:10 w/w) formed on the innersurface of the round bottomed flask. They were successively extruded through polycarbonate membranes (0.45 mm). Palmitoyl-AF not incorporated into the liposomal bilayer was separated from liposomes by a Sepharose 4B column equilibrated with 10 mM Tris-HCI buffered saline. Lectin (agglutinin RCA 120) was added to the suspension of AF-liposomes and incubated at $37^{\circ}C$ for 2 hr. After centrifugation, the unbound lectin in the supernatant was assayed for protein. The binding of the lectin to AF-liposomes (AF content 2.8 nmole) at $37^{\circ}C$ was linear at least upto 35 mg of lectin indicating high affinity association of the lectin to AF molecules of the liposomes.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.615-618
• /
• 2003

This paper presents Bi thin films have been fabricated by atomic layer-by-layer deposition and co-deposition at an IBS method. The growth rates of the films was set in the region from 0.17 to 0.27 nm/min. MgO(l00) was used as a substrate. In order to appreciate stable existing region of Bi 2212 phase with temperature and ozone pressure, the substrate temperature was varied between 655 and 820 $^{\circ}C$ and the highly condensed ozone gas pressure(PO$_3$) in vacuum chamber was varied between 2.0$\times$10$^{-6}$ and 2.3$\times$10$^{-5}$ Torr. Bi 2212 phase appeared in the temperature range of 750 and 795$^{\circ}C$ and single phase of Bi 2201 existed in the lower region than 785 $^{\circ}C$. Whereas, PO$_3$ dependance on structural formation was scarcely observed regardless of the pressure variation. And high quality of c-axis oriented Bi 2212 thin film with T$_{c}$(onset) of about 90 K and T$_{c}$(zero) of about 45 K is obtained. Only a small amount of CuO in some films was observed as impurity, and no impurity phase such as CaCuO$_2$ was observed in all of the obtained films.lms.

• New & Renewable Energy
• /
• v.7 no.2
• /
• pp.10-17
• /
• 2011

Korea is the 11th largest energy consumption country and 96% of its total energy consumption depends on imports from overseas. Therefore it is a very important task to secure renewable energy sources which can reduce both the carbon-dioxide emission and dependency on overseas energy imports. Among the various renewable energy sources, organic wastes are important sources. In Korea, 113 million toe of methane is generated from organic wastes annually, but only 3.7% is effectively used for energy conversion. Thus, it is very important to make better use of organic wastes, especially for power generation. The goals of this project are to develope the fuel supplying system of Bio Gasturbine (GT) for 5MW-class co-generation system. The fuel supplying system mainly consists of $H_2S$ removal system, Bio Gas compression system, Siloxane removal system and moisture separating systems. The fuel requirement of 5MW-class GT is at around 60% of $CH_4$, $H_2S$ (<30 ppm), Siloxane(<10 mg/$nm^3$) and supply pressure (> 25 bar) from biogas compressor. Main mechnical charateristics of Bio Gasturbine system have the specific performance; 1) high speed turbine speed (12,840 rpm) 2) very clean emmission NOx (<50 ppm) 3) high efficiency of energy conversion rate. This paper focuses on the development of design technology for food waste biogas pretreatment system for 5MW-class biogas turbine. The study also has the plan to replace the fuel of gas turbine and other distributed power systems. As the increase of bioenergy, this system help to contribute to spread more New & Renewable Energy and the establishment of Renewable Portfolio Standards (RPS) for Korea.

• Toxicological Research
• /
• v.17
• /
• pp.139-144
• /
• 2001

Chewing betel quid is associated with an increased risk of oral cancer. The betel quid chewed in Taiwan includes the inflorescence of Piper betle, which contains high concentrations of safrole (15 mg/fresh weight). Piper betle leaf is also used in betel quid; however, the concentration of safrole in betel leaf has not been documented. Chewing betel quid may contribute to safrole exposure in man (420 mm in saliva). Using $a^{32}$P-postlabeling method, we have recently demonstrated the presence of stable safrole-like DNA adducts in human oral tissues following betel quid chewing. Safrole is a rodent hepatocar-cinogen, and the real nature of safrole-DNA adducts in human tissues beside oral has not been elucidated. In this paper, we tested the safrole DNA adducts forming potential in human hepatic and oral derived cells by the ${32}^P$-postlabeling technique. The results suggest that oral cancer derived cell OC-2 alone is not able to form safrole-DNA adduct. However, safrole DNA adducts can be detected following I'-hydroxysafrole, a proximate safrole metabolite, treatment. In addition, pretreament of cytochrome P450 inducers also enhanced the formation of previously undetectable safrole DNA adducts. This finding couples with our previous results suggest that oral may serve as a target tissue for safrole, and safrole may be involved in oral carcinogenesis.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.6
• /
• pp.1114-1119
• /
• 2004

The biofilms on pipe walls in water distribution systems are of interest since they can lead to chlorine demand, coliform growth, pipe corrosion, and water taste and odor problems. As such, the study described in this paper is part of an AWWARF and Tampa Bay Water tailored collaboration project to determine the effect of blending different source waters on the water quality in various distribution systems. The project was based on 18 independent pilot distribution systems (PDS), each being fed by a different water blend (7 finished waters blended in different proportions). The source waters compared were groundwater, surface water, and brackish water, which were treated in a variety of pilot distribution systems, including reverse osmosis (RO) (desalination), both membrane and chemical softening, and ozonation-biological activated carbon (BAC), resulting in a total of 7 different finished waters. The observations from this study consistently demonstrated that unlined ductile iron was more heavily colonized by a biomass than galvanized steel, lined ductile iron, and PVC (in that order) and that the fixed biomass accumulation was more influenced by the nature of the supporting material than by the water quality (including the secondary residual levels). However, although the bulk liquid water cultivable bacterial counts (i.e. heterotrophic plate counts or HPCs) did not increase with a greater biofilm accumulation, the results also suggested that high HPCs corresponded to a low disinfectant residual more than a high biofilm inventory. Furthermore, temperature was found to affect the biofilms, plus the AOC was important when the residual was between 0.6 and 2.0 mg $Cl_2/l$. An additional aspect of the current study was that the potential of the exoproteolytic activity (PEPA) technique was used along with a traditional so-called destructive technique in which the biofilm was scrapped off the coupon surface, resuspended, and cultivated on an R2A agar. Both techniques indicated similar trends and relative comparisons among the PDSs, yet the culturable biofilm values for the traditional method were several orders of magnitude lower than the PEPA values.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.57 no.2
• /
• pp.27-36
• /
• 2015

The objective of this paper was to quantitatively analyze the effect of concentrated animal feeding operations (CAFO) NPS pollution on a small watershed water quality. Monitoring was conducted from March to October, 2013. Monthly flow rate and selected water quality at each monitoring site were measured during dry days. Rainy day monitoring also was conducted. Modeling was conducted to evaluate the effect of CAFO NPS pollution on the water quality at the watershed outlet. The highest and mean concentration of selected water quality indices during rainy days were higher than those in dry days in general. The highest TN concentration measured at the CAFP pollution discharge point was 237.831 mg/L. The results revealed that the CAFO NPS pollution sources could be equally blamed for the water quality degradation of the stream. However, the effect of the NPS pollution from CAFOs seemed not to be very influential to the watershed water quality at the outlet. SWAT modeling revealed that the TN load was reduced by 18.95 %, 23.39 % and 30.53 % at the watershed outlet if the TN load at the CAFO NPS pollution discharge point reduced by 20 %, 40 % and 60 %, respectively. It was thought that the natural attenuation processes played an important role. The modeling was based only on the assumption of the load reduction and not verified by the monitored data. Therefore, it was suggested that a long term monitoring studies for the evaluation of the impact of CAFO NPS pollution on the watershed water quality be conducted.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.9
• /
• pp.1476-1484
• /
• 2015

Three endoxylanase-encoding genes from the moderately themophilic chemoorganotrophic bacterium Melioribacter roseus were cloned and expressed in Escherichia coli. Genes xyl2091 (Mros_2091) and xyl2495 (Mros_2495) encode GH10 family hydrolases, whereas xyl2090 (Mros_2090) represents the GH30 family. In addition to catalytic domains, Xyl2090 and Xyl2091 contain carbohydrate-binding modules that could facilitate their binding to xylans and Por sorting domains associated with the sorting of proteins from the periplasm to the outer membrane, where they are covalently attached. Recombinant endoxylanase Xyl2495 exhibited a high specific activity of 1,920 U/mg on birchwood xylan at 40℃. It is active at low temperatures, exhibiting more than 30% of the maximal activity even at 0℃. Endoxylanases Xyl2090 and Xyl2091 have lower specific activities but higher temperature optima at 80℃ and 65℃, respectively. Analysis of xylan hydrolysis products revealed that Xyl2090 generates xylo-oligosaccharides longer than xylopentaose. Xylose and xylobiose are the major products of xylan hydrolysis by the recombinant Xyl2091 and Xyl2495. No activity against cellulose was observed for all enzymes. The presence of three xylanases ensures efficient xylan hydrolysis by M. roseus. The highly processive "free" endoxylanase Xyl2495 could hydrolyze xylan under moderate temperatures. Xylan hydrolysis at elevated temperatures could be accomplished by concerted action of two cell-bound xylanases; Xyl2090 that probably degrades xylans to long xylo-oligosaccharides, and Xyl2091 hydrolyzing them to xylose and xylobiose. The new endoxylanases could be useful for saccharification of lignocellulosic biomass in biofuels production, bleaching of paper pulp, and obtaining low molecular weight xylooligosaccharides.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.8
• /
• pp.1084-1091
• /
• 2013

In this paper, two statistical methods were applied to optimize medium components to improve the production of the milk-clotting enzyme by Bacillus amyloliquefaciens D4. First, wheat bran juice, skim milk powder, and $Na_2HPO_4$ were shown to have significant effects on D4 enzyme production using the Plackett-Burman experimental design. Subsequently, an optimal medium was obtained using the Box-Behnken method, which consisted of 3.31 g/l of skim milk powder, 5.0 g/l of sucrose, 0.1 g/l of $FeSO_4{\cdot}7H_2O$, 0.1 g/l of $MgSO_4{\cdot}7H_2O$, 0.1 g/l of $MnSO_4{\cdot}2H_2O$, 0.1 g/l of $ZnSO_4{\cdot}7H_2O$, 1.52 g/l of $Na_2HPO_4$, and 172.45 g/l of wheat bran juice. With this optimal medium, the milk-clotting enzyme production was remarkably enhanced. The milk-clotting enzyme activity reached 3,326.7 SU/ml after incubation of 48 h, which was 1.76-fold higher than that of the basic medium, showing that the Plackett-Burman design and Box-Behnken response surface method are effective to optimize medium components, and B. amyloliquefaciens D4 possessed a high rennet-producing capacity in the optimal medium.