• Journal of Ocean Engineering and Technology
• /
• v.21 no.2 s.75
• /
• pp.42-49
• /
• 2007

It has been known that shallow-water regions, such as tidal flats, sea grass and sea weed beds have water purification capability, and they also serve as nursery grounds for many fishes. On the other hand, tidal flat areas are economically attractive sites for reclamation, to be used for developing industries. When developing shallow-water areas, we have to propose a plan to mitigate the environmental impact associated with such a development plan. However, it is difficult to estimate the affects on the ecosystem and water purification, and the literature related to this matter is insufficient. In order to evaluate the ability of coastal tidal flat and to predict the future changes, it is necessary to develop a reliable prediction technique and construction of data by using a field investigation. In this study, we carried out a numerical model test for the tidal flat ecosystem, using the pelagic system and the benthic system, simultaneously, in order to show a change in the tidal flat ecosystem. The flow of nitrogen, phosphorus and carbon has been identified as a primary consideration of marine ecosystem components, and the capability of water purification and the change of the tidal flat were predicted using this flow. In order to make a more reliable prediction, a field investigation to determine tide, current and creatures of the object coastal area has been done. The purification capability of this shallow-water region is estimated from the model results. According to the results of experiments, the tidal flat has a capability of water purification (Sink) of 11mgN/m2/day, but the other area has a load (Source) of 20mgN/m2/day. As a result, we could confirm that the tidal flat of an object coastal area plays an important role in water purification.

• Plant Journal
• /
• v.15 no.4
• /
• pp.30-35
• /
• 2019

To meet both increasing social demand for reduction of fine dust and the strengthened air pollutant emission standards, this paper indicated performance enhancement of FGD with structural constraints in 500 MW coal fired thermal power plant's. Through modifying internal facilities for flue gases to make swirl in the absorption tower, it made turbulence and increased the efficiency of material transfer, the reaction area and time with the limestone slurry. Therefore, it could reduce dust and enhance the performance of collecting the SO₂. As a result, desulfurization efficiency was improved from 91.61% to 98.43% and dust removal efficiency was improved from 77.4% to 87.08%. Emission density is 7.85 ppm of SO₂ and 4.67 mg/㎥ of dust. This is a level that satisfies emission limit of 25 ppm of SO₂ and 5 mg/㎥ of dust which are the air pollutant emission standards of 2023. The performance enhancement method of this study is expected to be effectively applied to other coal-fired power plants with similar constraints.

• Journal of Plant Biotechnology
• /
• v.34 no.4
• /
• pp.293-298
• /
• 2007

Robinia pseudoacacia var. umbraculifera, commonly called umbrella black locust were regenerated after co-cultivation of internode segments with Agrobacterium tumefaciens which included yeast cadmium factor 1 (YCF 1) gene. The tolerance to cadmium and lead for plants can be increased by the YCF1 gene expression. Moreover, the recent studies have shown that YCF1 gene transgenic plants increase the accumulation of cadmium and lead into plant vacuoles. The effect of plant growth regulator such as 2,4-dichlorophenoxyacetic acid (2,4-D), ${\alpha}$-naphthaleneacetic acid (NAA), 6-benzyladenine (BA), and thidiazuron (TDZ) were studied to evaluate the propagation of plants through internode explants. The efficient induction of multiple adventitious shoots and callus were observed on a medium supplemented with 0.1 mg/L TDZ + 0.2 mg/L BA. To induce shoot elongation and rooting, regenerated shoots were transferred into basal MS medium without any plant growth regulator. Successful Agrobacterium tumefaciens mediated transformation was obtained by 20 min vacuum-infiltration with $50{\mu}M$ acetosyringone on the optimal multiple shoot induction medium with 30 mg/L hygromycin and 300 mg/L cefotaxime. To confirm the integration and expression of transgene, Polymerase Chain Reaction (PCR) and Reverse Transcriptase PCR (RT-PCR) were performed with specific primers. The frequency of transformation was approximately 18.94%. This study can be used to genetic engineering of phytoremediator.

• Journal of Forest and Environmental Science
• /
• v.38 no.4
• /
• pp.263-274
• /
• 2022

Quarrying of rock for construction purposes is a significant industry in any economy but has its negative impact. This study examined the impact of quarry activities on surrounding vegetation in Ogun State. Geographic Information System approach was used to map the various quarry locations present in different Local Government Areas in Ogun State; of which eight sites were selected namely Isara, Idode, Iwaye, Ogbere, Ilagbe, Adelokun Baaki Ake and Igodo. Vegetation composition analyses were carried out on the eight sites using Haga Ultimeter and chlorophyll content analysis. Data were subjected to descriptive and inferential statistics using SAS package (9.4 version). Sixty quarries were identified with Odeda Local Government Area (38.3%) having the highest percentage of quarry. The vegetative compositions analyses showed that Albizia zygia had the highest frequency (7) among identified plants in the quarries. The chlorophyll content of Albizia zygia in the wet season (492.2 mg Chl/m²) was significantly higher than dry season (464.4 mg Chl/m²) in all locations. However, Baaki Ake (Albizia zygia) chlorophyll content was highest among other locations in both seasons. In conclusion Albizia zygia showed highest resistance to quarry activities, hence common among other plants identified around the quarries.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.4
• /
• pp.294-300
• /
• 2013

In this study, major parameter of partial nitritation was investigated for the stable operation. In order to establish partial nitritation system, prevailing parameters such as temperature, BA (bicarbonate alkalinity) and pH were evaluated. As a result, it is inferred that appropriate bicarbonate alkalinity ratio (mg $NaHCO_3{\cdot}L^{-1}/mg$ Inf. $NH_4{^+}-N{\cdot}L^{-1}$) drives stable 50% partial nitritation at $32^{\circ}C$ and ambient temperature, respectively. Alkalinity ratio was proposed as new strategy for 50% partial nitritation without pH control in both temperature regimes. Because of the results, it was added amound of BA required only for 50% nitritation to inhibit nitratation. The effluent $NO_2{^-}-N/NH_4{^+}-N$ ratio reached almost 100% when initial bicarbonate alkalinity ratios (mg $NaHCO_3{\cdot}L^{-1}/mg$ Inf. $NH_4{^+}-N{\cdot}L^{-1}$) were 6.8 (R1) and 6.7 (R2), respectively. Polymerase chain reaction and denaturing gradient gel electrophoresis (PCR-DGGE) results demonstrated that AOB was the dominant nitrifying bacteria and NOB was negligible after adopting process control.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.4
• /
• pp.310-315
• /
• 2019

This study conducted a series of studies to find alternative ways to use Chlorine Bypass System-dust(CBS-dust) in cement production. The results of engineering characteristics of CBS-dust are summarized as follows. First of all, the density of CBS-dust is 2.40, lighter than cement and the pH was 12.50 which was strong alkaline. In terms of particle size, it was 11.70 ㎛ which was finer than cement. With chemical properties, calcium oxide(CaO) was the highest as 35.10%, potassium oxide(K₂O) was 32.43%, potassium chloride(KCl) was 19.46%, sulfur oxide(SO₃) was 6.81%, and the remaining chemical components are SiO₂, Fe₂O₃, Al₂O₃, MgO, and the like. Therefore, if CBS-dust is used as early-strength chemical admixtures in the concrete secondary products that use a large amount of mineral admixtures without rebar, it can be an effective method for increasing the strength of concrete as an alkali activator and preventing early-frost damage of Cold Weather Concrete.

• Journal of Ginseng Research
• /
• v.27 no.1
• /
• pp.37-42
• /
• 2003

For study about introduce of gene connected with disease and transformation system of gingseng, chitinase gene cloned from soybene and disease resistant gene were carried out for expression and transformation of plant using Agrobacterium. The disease resistance gene(DR-49), 35S-35S-AMV, has been constructed. The disease resistance gene and chitinase gene were introduced into the binary vector pRD 400, which were mobilized into Agrobacterium tumefaciens faciens strain MP 90 and LBA 4404 harboring disarmed Ti-plasmid. As a result of induce transformants using ginseng embryo and petiole, multi shoots were formed on MS medium supplemented 1 mg/ι 2,4-D and 0.5 mg/ι kinetin. Also transformation by cotyledonwas effective on MS medium supplemented 1 mg/ι 2,4-D and 0.5 mg/ι kinetin, transformation percent of disease resistant gene and chitinase gene were showed 18%, 14% respectively. As transformed tissue is under pre-embryoid condition, normal shoot is required through the process of matured embryo.

• Journal of Korea Society of Waste Management
• /
• v.35 no.8
• /
• pp.692-700
• /
• 2018

In this study, the results of PBDEs and HBCDs of the products and waste that contain BFRs such as domestic electronic products, automobiles and textile products were compared with international management standards, and their excess rates were calculated. Deca-BDE was detected among the PBDEs in TV rear cover plastics, car seats, automotive interior plastics, and automobile shredding residues of products and waste containing BFRs. The comparison with Basel Convention management standards (1,000 mg/kg) for PBDE-containing wastes (4 types in total) shows that the excess rate of all samples was less than 1.5%. The estimated excess rate compared to the EU and Basel convention management standards (1,000 mg/kg) for PBDEs (4 species + deca-BDE) and TV rear cover plastics was 37.5% (30 of 80 samples exceeded the standards). The estimated excess rate compared to the Basel convention management standards (1,000 mg/kg) for HBCD, building materials products and waste was 15.7% (17 of 108 samples exceeded the standards). In the case of PBDEs, it is necessary to remove only the rear cover of CRT TV among the electric and electronic products and treat it in the flame retardant treatment facility to improve the recycling collection system. In the case of HBCD, it is necessary to appropriately dispose of the recycled materials, heat insulation materials, TV plastics, and styrofoam in marine fishery among construction materials and restrict the use as recycled raw materials.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.491-492
• /
• 2015

계통 미연계 도서지역에 경제적으로 분산전원을 구축하기 위해서는 총 발전량 대비 적정 신재생에너지 발전 비율을 산정해야한다. 도서지역은 소규모 전력계통으로 이루어져 있어, 신재생에너지 출력의 간헐성은 계통에 미치는 영향이 크기 때문에 ESS(신재생에너지 설비용량 ${\times}$ 4h)를 설치하도록 의무화 하고 있다. ESS의 높은 설치단가는 경제성을 하락시키는 요인으로 작용하기 때문에, 적정용량의 신재생에너지 설비를 구축하는 것이 ESS로 인한 경제성 하락을 최소화 할 수 있다. 본 논문은 도서지역의 총 발전량의 30% 이상을 신재생발전으로 공급한다는 조건에서, 경제성을 고려한 신재생에너지 발전 방안을 제시한다.

• Journal of the Korean Society of Urban Environment
• /
• v.18 no.4
• /
• pp.401-408
• /
• 2018

EQPS (Effluent Quality Prediction System, Dynamita, France) was applied to analyze the appropriateness of the design of a bioreactor in A sewage treatment plant. A sewage treatment plant was designed by setting the design concentration of the secondary clarifier effluent to total nitrogen and total phosphorus, 10 mg/L and 1.8 mg/L, respectively, in order to comply with the target water quality at the level of the hydrophilic water. The retention time of the 4-stage BNR reactor was 9.6 hours, which was 0.5 for the pre-anoxic tank, 1.0 for the anaerobic tank, 2.9 for the anoxic tank, and 5.2 hours for the aerobic tank. As a result of the modeling of the winter season, the retention time of the anaerobic tank was increased by 0.2 hours in order to satisfy the target water quality of the hydrophilic water level. The default coefficients of the one step nitrification denitrification model proposed by the software manufacturer were used to exclude distortion of the modeling results. Since the process modeling generally presents optimal conditions, the retention time of the 4-stage BNR should be increased to 9.8 hours considering the bioreactor margin. The accurate use of process modeling in the design stage of the sewage treatment plant is a way to ensure the stability of the treatment performance and efficiency after construction of the sewage treatment plant.