• Proceedings of KOSOMES biannual meeting
• /
• 2017.11a
• /
• pp.274-274
• /
• 2017

• Industrial Engineering and Management Systems
• /
• v.11 no.4
• /
• pp.299-309
• /
• 2012

This paper introduces some of the developments related to the handling equipment in container terminals and various new conceptual handling systems that have been proposed during the last several decades. The basic ideas behind the previous equipment improvements are analyzed to identify future directions that can be used for devising new handling systems. The handling systems in the container terminals include a quayside handling system, transport system, and yard system. In response to the deployment of mega-sized vessels for container transportation systems, productivity improvement has become one of the most urgent issues in the container terminals. This paper analyzes the previous improvements made for achieving higher productivity in the three subsystems of container handling. Some conceptual handling systems are introduced including the linear motor conveyance system (LMCS), automated storage and retrieval systems (AR/RS), overhead grid rail (GRAIL), SPEEDPORT, SuperDock, the automated container system by ZPMC (ACS-ZPMC), and AUTOCON.

• Annual Conference of KIPS
• /
• 2001.10a
• /
• pp.121-124
• /
• 2001

계통수는 특정 객체의 분류 즉 특정 객체로부터 추출한 염기서열을 이용하여 그 객체의 소속 분류 집단을 결정하기 위해서 사용될 수 있다. 만약 특정지역에서 획득한 토끼의 종을 구분하기 위해서 이미 분류된 토끼의 염기서열들을 가지고 염기서열들과의 관계를 표현하는 계통수를 제작함으로써, 객체를 분류 할 수 있다. 계통수 제작은 기존의 계통수 제작 도구들(MEGA등)이 사용되지만, 이러한 계통수 제작 도구는 객체의 어떤 특성에 의해서 종이 나뉘어지는 가는 예측 할 수 없다. 계통수 제작에 이용되는 염기서열 데이터는 기존의 염기서열 데이터 베이스들(EMBL, GenBank, DDBJ)에서 인터넷을 이용하여 찾을 수 있지만, 계통생물학을 위해 누적된 데이터가 아니므로, 계통수 제작을 위해서는 사용이 제한적이다. 또 계통수 제작 도구을 사용하기 위해서는 자신이 관련 염기서열 데이터를 수집하여야 한다. 본 논문은 웹기반 계통수 추론 시스템을 제시한다. 본 시스템은 염기서열 데이터를 검색하여, 계통 분류 즉 계통수 제작을 위한 데이터로 저장하고, 이를 이용하여 계통수를 그릴 수 있다. 또한 이렇게 저장된 데이터는 데이터 마이닝 분류 기법을 사용하여, 각 객체 분류 집단을 모델링하며, 분류 속성을 예측할 수 있다.

• Proceeding of EDISON Challenge
• /
• 2016.11a
• /
• pp.49-54
• /
• 2016

본 연구에서는 유/무인 우주발사체의 재진입모듈에 적용되는 Heat-Shield(열차단막)의 형상에 따른 유동특성을 수치해석으로 분석했다. 재진입모듈이 지구의 대기권을 다시 진입하는 환경(고도 70km)을 기준으로 해석을 진행했다. 열차단막의 형상은 평판, 곡률이 다른 타원으로 나누었으며, 각 형상별 유동특성을 확인했다. 결론적으로 재진입 모듈의 형상에 따라 압력과 속도분포를 기준으로 열적인 분포를 예상했으며, 계산된 항력계수를 비교했다. 단순한 유동으로 열적 분포를 예상한 것에 한계가 있지만 대기권 재진입 모듈의 2차원 설계에 도움이 될 형상기준을 제시했다. 수치해석은 모두 Edison_CFD에서 제공하는 툴을 이용해 수행했으며, 전처리에는 e-mega (structured)을 후처리에는 e-dava를 이용했다. 해석 solver는 '정렬격자기반 2차원 압축성 유동 범용해석 소프트웨어'를 이용했다.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.834-836
• /
• 2003

This paper describes the optimal design, construction and performance evaluation of coaxial shunts used in high current testing laboratory for current measuring system. These shunts, which are of tubular type coaxial shunts, the currents to be measured range from Amperes to several kiloAmperes, and the frequency of the signals has a bandwidth from DC to megaHertz. The shunt must have the mechanical strength to support the forces produced by the transient current, above all, the measuring capabilities of shunt are dependent upon short response time and it must be as free as possible of inductive effects. In this paper presents both characteristic of shunt and design of tubular type coaxial shunt.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.6 no.1
• /
• pp.125-145
• /
• 1998

The term "Privatization" has a different meaning in different contexts and cultures. In this paper, the term "Privatization" in the context of airports is defined as the movement of an entity from the government sector to the private sector. This is the definition that is commonly employed in the U.S. Airport revenue can he divided into two sub-categories of aeronautical revenue and non-aeronautical revenue. At many of the major international airports, however, non-aeronautical revenue has been growing faster than the aeronautical revenue, contributing an increasingly larger share of the total revenue. And the best way to enhance simultaneously the airport operations. With the remarkable growth in the air traffic volume of pssengers and cargo. more and more mega-international airports have been built or are under construction. As the air transport demand is expected to increase at an even greater rate in the 21st century, new types of airports which will be free of current major problems. such as airport congestion and flight delays are badly needed.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.2
• /
• pp.157-162
• /
• 2012

Wind energy is created in mega-sized wind farms situated kilometers off shore. In fact, two possibilities are considered for the transmission system between the offshore wind farm and the onshore grid: high-voltage direct current and high-voltage alternating current. From this point of view, the current paper aims to compare both systems for a 2 GW wind farm situated 80 km from the Point of Common Coupling on an economic basis using a discounted cash flow analysis. A tool is developed in Microsoft Excel to allow for quick insight in the variation of input parameters.

• Journal of Information Technology and Architecture
• /
• v.9 no.1
• /
• pp.11-19
• /
• 2012

Generally, a suffix tree is an efficient data structure since it reveals the detailed internal structures of given sequences within linear time. However, it is difficult to implement a suffix tree for a large number of sequences because of memory size constraints. Therefore, in order to compare multi-mega base genomic sequence sets using suffix trees, there is a need to re-construct the suffix tree algorithms. We introduce a new method for constructing a suffix tree on secondary storage of a large number of sequences. Our algorithm divides three files, in a designated sequence, into parts, storing references to the locations of edges in hash tables. To execute experiments, we used 1,300,000 sequences around 300Mbyte in EST to generate a suffix tree on disk.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.05b
• /
• pp.175-179
• /
• 2009

Researches of current PMIS(Project Management Information System) information searching focus on providing personalized results as well as matching needed queries in an enormous amount of information. This paper aim at discovering hidden knowledge to provide personalized and inferred search results based on the ontology with categorized concepts and relations among construction data. The current PMIS searching occasionally presents too much redundant information or offers no matching results from large volumes of data. In this paper, we propose a service searching system, which becomes aware of users device using iPMIS(Intelligent Program Management Information System). And we design and plant the ontology-based iPMIS, which is aware of the context in its environment.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.441-441
• /
• 2007

As Rhenium-Iridium{Re-Ir) coating possesses such features as, high hardness, high elasticity, abrasion resistance and chemical stability, there have been exerted continuous efforts in research works in a variety of fields, and this technology has also been applied widely to industrial areas. In this research, the optimal grinding condition was identified using Microlens Process Machine in order to contribute to the development of aspheric glass lens for mobile phone module having 3 mega pixel and 2.5X zoom, and molding core(WC) was manufactured having performed ultra-precision machining. Effects of Re-Ir coating on form accuracy (P-V) of molding core and surface roughness(Ra) were measured and evaluated.