• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.6
• /
• pp.603-611
• /
• 2005

• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.6
• /
• pp.457-465
• /
• 2018

Since IMO has discussed the effectuation of the EEDI, EEOI and SEEMP, each country, shipping company, shipbuilding company and research institute have been requested to prepare the design, construction and operation of the efficient ship. From the shipbuilding company's point of view, it was necessary to develop a method based on the maneuvering equations of motion in a bid to estimate the EEOI considering the design, model test results and the calculation results of the ship. In this paper, the estimation method of RPM, power and fuel consumption proposed in the previous research was developed to construct a framework that helps in the estimation of the EEOI. It was possible to estimate the EEOI from the estimated ship speed (distance), LNG cargo mass, fuel consumptions and emission factors according to the type of fuel. The rapid increase of the evaluated EEOI was observed when the LNGC with ME-GI engine executing the course changed with a large difference. This prompted the comparison of the type of fuel on the estimated EEOI by considering HFO, LNG fuel and MGO properties.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.5
• /
• pp.617-626
• /
• 2019

This study analyzes the optimal location of gas detectors through the gas dispersion in a cargo compressor room of a 174K LNG carrier equipped with high-pressure cargo handling equipment; in addition, we propose a reasonable method for determining the safety regulations specified in the new International Code of the Construction and Equipment of Ships Carrying Liquefied Gases in Bulk (IGC). To conduct an LNG gas dispersion simulation in the cargo compressor room-equipped with an ME-GI engine-of a 174 K LNG carrier, the geometry of the room as well as the equipment and piping, are designed using the same 3D size at a 1-to-1 scale. Scenarios for a gas leak were examined under high pressure of 305 bar and low pressure of 1 bar. The pinhole sizes for high pressure are 4.5, 5.0, and 5.6mm, and for low pressure are 100 and 140 mm. The results demonstrate that the cargo compressor room will not pose a serious risk with respect to the flammable gas concentration as verified by a ventilation assessment for a 5.6 mm pinhole for a high-pressure leak under gas rupture conditions, and a low-pressure leak of 100 and 140 mm with different pinhole sizes. However, it was confirmed that the actual location of the gas detection sensors in a cargo compressor room, according to the new IGC code, should be moved to other points, and an analysis of the virtual monitor points through a computational fluid dynamics (CFD) simulation.