• Korean Journal of Medicinal Crop Science
• /
• v.14 no.4
• /
• pp.212-216
• /
• 2006

Root of Scutellaria baicalensis G. was extracted with methanol and water to give the yield of 30.0% in order to find the antioxidant substance. The extract was fractionated with diethyl ether, n-butanol and water to test the inhibitive activity against xanthine oxidase. Three fractions inhibited the activities of xanthine oxidase by 48.2%, 10.2% and 2.8%, respectively, at the amount of $0.1\;{\mu}g$. A component that exhibited strong inhibition of xanthine oxidase was isolated from diethyl ether fraction (SE Fr.) by silica gel column chromatography and HPLC, and then identified by $^1H-NMR$, $^{13}C-NMR$ and MS spectrophotometry. EDA (Electron Donating ability) of the compound was 28.5% at the concentration $100\;{\mu}g/3\;ml$. That was identified to be 3,5,7-trihydroxy-2'-methoxyflavanone by spectrophotometric analysis using $^1H-NMR,\;^{13}C-NMR$ and Mass spectrophotometry.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.154-154
• /
• 2017

Ti-6Al-4V alloys are widely used as metal-lic biomaterials in dentistry and orthopedics due to its excellent biocompatibility and me-chanical properties. However, because of low biological activity, it is difficult to form bone growth directly on the surface of titanium implants. For this reason, surface treatment of plasma electrolytic oxidation(PEO) was used for dental implants. To enhance bioac-tivity on the surface, strontium(Sr) and sili-con(Si) ions can be added to PEO treated sur-face in the electrolyte containing these ions. The presence of Sr in the coating enhances osteoblast activity and differentiation, where-as it inhibits osteoclast production and prolif-eration. And Si has been found to be essen-tial for normal bone, cartilage growth, and development. In this study, electrochemical characteristics of Ca, P, Sr, and Si ions from PEO-treated Ti-6Al-4V alloy surface was re-searched using various experimental instruments. DC power is used and Ti-6Al-4V al-loy was subjected to a voltage of 280 V for 3 minutes in the electrolyte containing 5, 10, 20M% Sr ion and 5M% Si ion. The morphol-ogies of PEO-treated Ti-6Al-4V alloy by electrochemical anodization were examined by field-emission scanning electron micro-scopes (FE-SEM), energy dispersive x-ray spectroscopy (EDS), x-ray diffraction (XRD) and corrosion analysis using AC impedance and potentiodynamic polarization test in 0.9% NaCl solution at similar body tempera-ture using a potentiostat with a scan rate of 1.67mV/s and potential range from -1500mV to + 2000mV.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.6
• /
• pp.835-841
• /
• 1998

The antimicrobial activities of horseradish ( Wasahia japonica) root extract against 4 kinds of food poisoning bacteria and 3 kinds of molfs were examined. The antimutagenic activity of horseradish ( Wasahia japonica) root extracts was also examined by Ames test with Salmonella tyhimurium TA 98 The antimicrobial activities of distilled water extracts from horseradish root were stronger than those of ethanol extracts, and stronger against molds than bacteria. Of the kinds of bacteria, Vibrio parahaemolyticus was best inhibited by the distilled water extracts from horseradish root. The antimicrobial activity of distilled water extracts from horseradish root were stronger against 3-Amino-1, 4-dimethyl-5H-pyrido{4,3-b}indole than 2-Amino-3,-8-dimethylimidazo-[4,5-f]quinoxaline.

• Journal of Microbiology and Biotechnology
• /
• v.12 no.5
• /
• pp.858-863
• /
• 2002

An antimicrobial compound was isolated from the MeOH extract of Catalpa ovata G.$D_{ON}$ fruits, and its structure was Identified as 4,9-dihydroxy-2,2-dimethyl-3,4-Uihydronaphtho[2,3-b]pyran-5,10-dione (HMNP). The antimicrobial activity of the Un was determined by measuring the dose-response inhibiton of microbial growth in liquid cultures and then compared with that of lapachol, a well known antimicrobial 1,4-naphthoquinone. The antimicrobial activity of the HMNP was more effective than that of lapachol over a wide range of test organisms. Gram-positive bacteria, yeast, and fungi ($IC_{50}$ $20-75\muM$) were found to be more sensitive to the HMNP than Cram-negative bacteria ($IC_{50}$ > $100\muM$). The HMNP also inhibited germination of spores of many fungi. The morphological defurmation of the fungal spores was induced by the treatment of HMNP, as illustrated by Scanning Electron Microscopy (SEM).

• Journal of Plant Biotechnology
• /
• v.43 no.3
• /
• pp.332-340
• /
• 2016

Seed size traits are controlled by multiple genes in crops and determine grain yield, quality and appearance. However, the molecular mechanisms controlling the size of plant seeds remain unclear. We performed functional analysis of BrPATL4 encoding Sec14-like protein to determine the genetic architecture of seed size, shape and their association analyses. We used 60 $T_3$ transgenic rice lines to evaluate seed length, seed width and seed height as seed size traits, and the ratios of these values as seed shape traits. Pleiotropic effects on general architecture included small seed size, erect panicles, decreased grain weight, reduced plant height and increased sterility, which are common to other mutants deficient in gibberellic acid (GA) biosynthesis. To test whether BrPATL4 overexpression is deleterious for GA signal transduction, we compared the relative expression of GA related gene and the growth rate of second leaf sheath supplied with exogenous $GA_3$. Overexpression of BrPATL4 did not affect GA biosynthesis or signaling pathway, with the same response shown under GA treatment compared to the wild type. However, the causal genes for the small seed phenotype (D1, SRS1, and SRS5) and the erection of panicles showed significantly decreased levels in mRNA accumulation compared to the wild type. These results suggest that the overexpression of BrPATL4 can control seed size through the suppression of those genes related to seed size regulation. Although the molecular function of BrPATL4 is not clear for small seed and erect panicles of BrPALT4 overexpression line, this study provides some clues about the genetic engineering of rice seed architecture.

• Journal of Welding and Joining
• /
• v.28 no.5
• /
• pp.69-74
• /
• 2010

Irradiation behavior of the reactor pressure vessel SA508 class 3 steel weld metals was examined by Charpy V Notch impact specimens. The specimens were exposed to a fluence of $2.8{\times}1019$ neutrons(n)/$cm^2$(E>1 MeV) at $288^{\circ}C$. The irradiation damage of weld metal was evaluated by comparison between unirradiated and irradiated specimens in terms of absorbed energy and lateral expansion. The specimens for neutron irradiation were welded by submerged arc welding process at a heat input of 3.2 kJ/mm which showed good toughness in terms of weld microstructure, absorbed energy and lateral expansion. The post-irradiation Charpy V notch 41J and 68J transition temperature elevation were $65^{\circ}C$ and $70^{\circ}C$, respectively. This elevation was accompanied by a 20% reduction in Charpy V notch upper shelf energy level. The lateral expansion at 0.9mm irradiated Charpy specimens showed temperature elevation of $65^{\circ}C$ and was greatly decreased due to radiation damage.

• The Journal of Korean Medicine
• /
• v.18 no.1
• /
• pp.299-315
• /
• 1997

The present experiments were designed to investigate the effects of Samsaengyeum. water extracts on the Cardiovascular System in the Experimental Animals. Thus, the changes of blood pressure and heart rate were measured after oral administration. Measurement of Mortality rate was observed for measuring the effect of Samsaengyeum water extract Samsaengyeum water extract against pulmonary thromboembolism induced by collagen the mixture(0.1me/10g, 2mg/kg B.W) plus serotonin(5mg/kg B.W) in mouse. The effect of Samsaengyeiim water extract was examined by observing the change of collagen-induced platelet aggregation, coagulation activity, ex vivo and in vitro fibrinolytic activity of euglobulin fraction in rats. The results were summarized as followings. 1. Samsaengyeum dropped the blood pressure in spontaneous hypertensive rat. 2. The drug increased the auricular blood flow in rabbit. 3. The drug relaxed the artery contraction by pretreated norepinephrine in rat. 4. The drug inhibited the death rate of mouse which was led to thromboembolism by serotonin and collagen. 5. The drug inhibited the platelet aggregation in rat. 6. The drug prolonged the prothrombin time and activated partial thromboplastin time on the test of plasma coagulation factor activity in rat, but was not valuable. 7. The drug reduced the fibrinogen lyses time and increased the lyses area of rat. 8. Samsaengyeum reduced fibrinogen lyses time of rat in vitro assay. According to the above mentioned results, Samsaengyeum increased the blood flow and dropped the blood pressure by the dilation of blood vessel. And the drug inhibited the platelet aggregation.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.6
• /
• pp.297-301
• /
• 2006

In the present work, we investigate the characteristics of new composition material, chalcogenide $Ge_1Se_1Te_2$ material in order to overcome the problems of conventional PRAM devices. The Tc of $Ge_1Se_1Te_2$ bulk was measured $231.503^{\circ}C$ with DSC analysis. For static DC test mode, at low voltage, two different resistances are observed. depending on the crystalline state of the phase-change resistor. In the first sweep, the as-deposited amorphous $Ge_1Se_1Te_2$ showed very high resistance. However when it reached the threshold voltage(about 11.8 V), the electrical resistance of device was drastically reduced through the formation of an electrically conducting path. The phase transition between the low conductive amorphous state and the high conductive crystal]me state was caused by the set and reset pulses respectively which fed through electrical signal. Set pulse has 4.3 V. 200 ns. then sample resistance is $80\sim100{\Omega}$. Reset pulse has 8.6 V 80 ns, then the sample resistance is $50{\sim}100K{\Omega}$. For such high resistance ratio of $R_{reset}/R_{set}$, we can expect high sensing margin reading the recorded data. We have confirmed that phase change properties of $Ge_1Se_1Te_2$ materials are closely related with the structure through the experiment of self-heating layers.

• Journal of Korea Water Resources Association
• /
• v.31 no.6
• /
• pp.675-684
• /
• 1998

This paper presents the empirical formulas for determining the design-width for medium rivers in the Han river basin. The design flood, the watershed ares, and the channel slope of 216 medium rivers in the Han river basin are collected. the design width formulas are then determined by 1) the least squares (LS) method, 2)the least median squares (LMS) method, and 3) the reweighted least squares method based on the LMS (RLS). The six types of formulas are considered to determine the acceptable type for medium streams in the Han river basin. The root mean squared errors (RMSE), the absolute mean (AME) errors, and the mean errors (ME) are computed to test the formulas derived by three regression methods. It si found that the equation related stream width to the watershed area and the channel slope is acceptable for determining the design width for medium streams in the Han river basin. It is expected that the equations proposed by this study be used an index for determining the design-width for medium streams in the Han river basin.

• Polymer(Korea)
• /
• v.35 no.1
• /
• pp.40-46
• /
• 2011

The synthesis of well-defined poly(styrene-b-isobutylene-b-styrene) (SIBS) triblock copolymers was accomplished by cationic sequential block copolymerization of isobutylene (IB) with styrene (St) using 1,4-di(2-chloro-2-propyl) benzene (DCC) /$TiCl_4$/2,6-di-tert-butylpyridine(DtBP) as an initiating system in methyl chloride ($CH_3Cl$)/methylcyclohexane(MeChx) (50/50 v/v) solvent mixture at $-80^{\circ}C$. The triblock copolymers exhibited excellent thermoplastic and elastomeric characteristics. Tensile strengths and Shore hardness increased with increasing polystyrene (PS) content, while elongation at break decreased. The blood-compatibility of SIBS was assessed by SEM observation of the platelet adhesion, blood clotting time and haemolysis ratio. The haemolysis ratios were below 5% which met the medical materials standard. The platelet adhesion test further indicated that SIBS block copolymers had a good blood compatibility.