• Korean Chemical Engineering Research
• /
• v.44 no.2
• /
• pp.121-128
• /
• 2006

Propylene epoxidation by $H_2O_2$ (30％ aqueous) as oxidant was studied in a semi-batch reactor using TS-1 catalyst: Effects of reaction temperature, time, pressure, solvent, catalyst and $H_2O_2$ concentration on $H_2O_2$ conversion (limiting reagent) and product distribution were investigated. Potential inhibition by propylene oxide on the epoxidation rate was also examined. Ti-MCM-22 with MWW zeolytic structure was found to exhibit better performance than TS-1 with MFI structure, provide that a proper choice of solvent(acetonitrile) is made.

• Korean Journal of Food Science and Technology
• /
• v.40 no.4
• /
• pp.419-423
• /
• 2008

The present study examined the effects of different calcium (Ca) sources and concentrations on the growth and Ca absorption of Agrocybe cylindracea mycelia grown in submerged cultures. The dry weights of the mycelia were not significantly different (significance level of 5%) according to the type of Ca added, and increased with increasing Ca concentration until 500 mg/L, and then decreased at concentrations of 1000 mg/L or greater. The Ca contents of groups were significantly different according to the various concentrations of the Ca source, in which the Ca content of the control group cultured without added Ca was 198.3 mg/kg, and in the treatment groups, Ca content increased to a minimum of 273.7 mg/kg (1.4 times) and a maximum of 67246.0 mg/kg (339.1 times) the Ca contents of the groups generally increased with increasing Ca concentration. According to the number of culture days, growth rates were highest during days 8 through 12, and remained relatively high until day 16. In addition, Ca contents per unit dry weight were higher in young mycelia with a shorter culture period than in mature mycelia with a longer culture period. According to pH, the most active growth and highest Ca content occurred in MCM liquid medium at pH 7.0. In conclusion, in order to produce Agrocybe cylindracea mycelia with high Ca content, it is considered most efficient to culture them in MCM liquid medium without a pH adjustment and containing 1,000 mg/L of Ca-lactate, which is commonly used as a Ca additive in food, as well as to use mycelia between 12-16 days of culturing.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.9
• /
• pp.26-34
• /
• 1998

This paper presents a characterization method for faults of circuit patterns on MCM(Multichip Module) or PCB(Printed Circuit Board) substrates with electron beams of a SEM(Scanning Electron Microscope) by inducing voltage contrast on the signal line. The experimentation employes dual potential electron beams for the fault characterization of circuit patterns with a commercial SEM without modifying its structure. The testing procedure utilizes only one electron gun for the generation of dual potential electron beams by two different accelerating voltages, one for charging electron beam which introduces the yield of secondary electron $\delta$ < 1 and the other for reading beam which introduces $\delta$ > 1. Reading beam can read open's/short's of a specific net among many test nets, simultaneously discharging during the reading process for the next step, by removing its voltage contrast. The experimental results of testing the copper signal lines on glass-epoxy substrates showed that the state of open's/short's had generated the brightness contrast due to the voltage contrast on the surface of copper conductor line, when the net had charged with charging electron beams of 7KV accelerating voltages and then read with scanning reading electron beams of 2KV accelerating voltages in 10 seconds. The experimental results with Au pads of a IC die and Au plated Cu pads of BGA substrates provided the simple test method of circuit lines with 7KV charging electron beam and 2KV reading beam. Thus the characterization method showed that we can test open and short circuits of the net nondestructively by using dual potential electron beams with one SEM gun.

• Clean Technology
• /
• v.24 no.1
• /
• pp.55-62
• /
• 2018

The adsorbent used in water-adsorption cooling system utilizing low-temperature heat of below $90^{\circ}C$ is required to exhibit high water uptake capacity at a relative humidity ($P/P_0$) between 0.1 and 0.3. Mesoporous silica (MCM-41) and MOF(MIL-101) exhibit quite large water adsorption capacity under saturated water vapor at $35^{\circ}C$. However, these adsorbents show small water adsorption capacity ($0.027{g_{water}\;g_{ads}}^{-1}$, $0.074{g_{water}\;g_{ads}}^{-1}$, respectively) in the relative humidity ($P/P_0$) range of 0.1 to 0.3. In this study, the surface properties of mesoporous silica and MOF were modified by simple methods to develop an adsorbent having a higher water uptake than the conventional water adsorbents at a relative humidity ($P/P_0$) of 0.1 ~ 0.3. In the case of mesoporous silica (MCM-41) exhibiting mainly water adsorption at $P/P_0=0.5{\sim}0.7$, aluminum species was functionalized on the mesopore walls and then cations existing near the aluminum were exchanged with various cations (e.g., $Na^+$, ${NH_4}^+$, and $(C_2H_5)_4N^+$). In addition, 20 wt% (to total weight of the composites) of hygroscopic inorganic salt ($CaCl_2$) was impregnated on the MCM-41. In the case of the MIL-101 (MOF), 20 wt% of hygroscopic inorganic salt ($CaCl_2$) was impregnated on the MIL-101. The MCM-41 which was ion-exchanged with various cations has main adsorption branch around 0.5 of $P/P_0$ which was slightly shifted with low-pressure direction in comparison with pristine MCM-41. However, tiny increases were observed on the adsorption in the range of $P/P_0$ between 0.1 and 0.3. After salt impregnation on the MCM-41, the adsorption capacity under $P/P_0=0.1{\sim}0.3$ at $35^{\circ}C$ was increased from $0.027{g_{water}\;g_{ads}}^{-1}$ to $0.152{g_{water}\;g_{ads}}^{-1}$. In the case of MIL-101, the amount of water adsorption at $35^{\circ}C$ under $P/P_0=0.1{\sim}0.3$ was increased from $0.074{g_{water}\;g_{ads}}^{-1}$ to $0.330{g_{water}\;g_{ads}}^{-1}$ after the salt impregnation.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.8
• /
• pp.3681-3685
• /
• 2012

Background: In breast cancer, estrogen receptors have been demonstrated to interact with transcription factors to regulate target gene expression. However, high-throughput identification of the transcription regulation relationship between transcription factors and their target genes in response to estradiol is still in its infancy. Purpose: Thus, the objective of our study was to interpret the transcription regulation network of MCF7 breast cancer cells exposed to estradiol. Methods: In this work, GSE11352 microarray data were used to identify differentially expressed genes (DEGs). Results: Our results showed that the MYB (v-myb myeloblastosis viral oncogene homolog [avian]), PGR (progesterone receptor), and MYC (v-myc myelocytomatosis viral oncogene homolog [avian]) were hub nodes in our transcriptome network, which may interact with ER and, in turn, regulate target gene expression. MYB can up-regulate MCM3 (minichromosome maintenance 3) and MCM7 expression; PGR can suppress BCL2 (B-cell lymphoma 2) expression; MYC can inhibit TGFB2 (transforming growth factor, beta 2) expression. These genes are associated with breast cancer progression via cell cycling and the $TGF{\beta}$ signaling pathway. Conclusion: Analysis of transcriptional regulation may provide a better understanding of molecular mechanisms and clues to potential therapeutic targets in the treatment of breast cancer.

• The Korean Journal of Mycology
• /
• v.47 no.4
• /
• pp.359-371
• /
• 2019

To optimize the expression and secretion of ferritin protein associated with ion storage in the mushroom, Pleurotus eryngii, a recombinant secretion vector, harboring the ferritin gene, was constructed using a pPEVPR1b vector under the control of the CaMV 35S promoter and signal sequence of pathogen related protein (PR1b). The ferritin gene was isolated from the T-Fer vector following digestion with EcoRI and HindIII. The gene was then introduced into the pPEVPR1b secretion vector, and it was then named pPEVPR1b-Fer. The recombinant vector was transferred into P. eryngii via Agrobacterium tumefaciens-mediated transformation. The transformants were selected on MCM medium supplemented with kanamycin and its expression was confirmed by SDS-PAGE and western blotting. Expression of ferritin protein was optimized by modifying the culture conditions such as incubation time and temperature in batch and 20 L airlift type fermenter. The optimal conditions for ferritin production were achieved at 25℃ and after incubating for 8 days on MCM medium. The amount of ferritin protein was 2.4 mg/g mycelia, as measured by a quantitative protein assay. However, the signal sequence of PR1b (32 amino acids) seems to be correctly processed by peptidase and ferritin protein may be targeted in the apoplast region of mycelia, and it might not be secreted in the culture medium. The iron binding activity was confirmed by Perls' staining in a 7.5% non-denaturing gel, indicating that the multimeric ferritin (composed of 24 subunits) was formed in P. eryngii mycelia. Mycelium powder containing ferritin was tested as a feed additive in broilers. The addition of ferritin powder stimulated the growth of young broilers and improved their feed efficiency and production index.

• Applied Chemistry for Engineering
• /
• v.19 no.4
• /
• pp.452-456
• /
• 2008

Mesoporous silicate materials have been used as adsorbents due to the advantage of high specific surface area and regular mesopores. In this study, conventional mesoporous silicates (MCM-41, and SBA-15) were utilized as adsorbents for gaseous benzene, one of volatile organic compounds. In the results of the breakthrough curves of gaseous benzene, SBA-15 showed a higher benzene adsorption capacity in adsorption condition of this study. Especially, compared to benzene adsorption of zeolite X, that of SBA-15 was higher by a factor of 2.7. With increasing adsorption temperature, adsorption capacity for benzene of SBA-15 was decreased rapidly. This indicates that benzene adsorbed weakly on SBA-15.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2000.04a
• /
• pp.69-72
• /
• 2000

기판과의 동시소성에 의한 고주파 MCM-C(Multi-Chip-Module-Cofired)용 저항을 제작하고 6 GHz 까지의 RF 특성을 측정하였다. 기판은 저온 소성용 기판으로서 총 8층으로 구성하였으며, 7층에 저항체 및 전극을 인쇄하고 Via를 통하여 기판의 최상부까지 연결되도록 하였다 저항체 Pastes, 저항체의 크기, Via의 길이 변화에 따라서 저항의 RF 특성은 고주파일수록 더욱 DC 저항값에서부터 변화되는 양상을 보였다. 내부저항의 등가회로를 구현한 결과, 저항은 전송선로, Capacitance 성분이 혼재되어 있는 것으로 나타났으며 전극의 형태에 따라 Capacitance 성분이 많은 차이를 나타내었다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.7 no.3
• /
• pp.34-42
• /
• 1997

This paper presents new fuzzy learning algorithms and their applications to time series prediction. During generating fuzzy rules from numerical data, there is a tendency to produce conflicting rules which have same premise but different consequence. To resolve the problem, we propose MCM(Modified Center Method) which is proven to reduce the error in the prediction. We have applied MCM to the analysis of Mackey-Glass time series and Gas Furnace da.ta to verify its efficiency.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.7
• /
• pp.3117-3130
• /
• 2016

High peak-to-average power ratio (PAPR) of transmitted signals is a major drawback in Multicarrier modulation (MCM) systems. Companding transform is a well-known method to reduce the PAPR without restrictions on system parameters such as the number of subcarriers, frame format and constellation type. In this paper, a novel adaptive companding scheme, mainly focuses on compressing the large signals into the desirable distribution, is proposed to reduce the PAPR with low implementation complexity. In addition, formulas to calculate its PAPR and bit error rate (BER) performance are also derived. Simulation results confirm that the proposed scheme can achieve an effective tradeoff between PAPR reduction and BER performance by carefully choosing the companding parameter.