The dehumidifiers were prepared by the impregnation of the zeolites such as MCM 48, USY, beta on the silica ceramic paper. Their capacities for $H_2O$ absorption and regeneration of the bed were tested in a fixed bed reactor system. The $H_2O$ absorption capacities of the dehumidifiers impregnated with the zeolites were $1.5{\sim}2$ times higher than those without the zeolites. Especially, the humidifier using MCM 48 and colloidal silica showed an excellent capacity (42.1g $H_2O/g$ absorbent). It was found that the $H_2O$ absorption capacities of the dehumidifiers were improved because the amount of silica gel, the main component in absorbing $H_2O$, increased due to the large surface area and pore volume of the zeolites. In addition, $H_2O$ was easily desorbed from the dehumidifiers with zeolites at $80^{\circ}C$ of regeneration temperature and the desorption amount of $H_2O$ was the same as that absorbed. It was confirmed that the $H_2O$ absorption capacities of the dehumidifiers impregnated with zeolite were maintained without deactivation through the repeated cyclic experiments.
Proceedings of the International Microelectronics And Packaging Society Conference
/
2000.11a
/
pp.57-57
/
2000
Brazing characteristics of the LTCC(Low Temperature Co-fired Ceramics)/ Kovar(Fe-Ni-Co alloy) was investigated. Kovar is one of the typical material for the lid of MCM and packages. In case of alumina package, Brazing process is done by higher temperature profile than 800 $^{\circ}C$ and Ag-Cu alloy. But, LTCC has sintering temperature near 850 $^{\circ}C$. So, it is difficult to use the same process as alumina brazing. The adhesion strength of the brazed part is affected by brazing alloy and metallization properties between conductor pattern and LTCC material. We investigated brazing characteristics of the LTCC/Kovar using various brazing alloys(Ag-Cu, Au-Sn) and process conditions. And, we examined the influence of the glass contents in conductor on the brazing characteristics of the LTCC/Kovar.
Park, Chang-Kyu;Tu, Qi;Cho, Ju-Hyun;Yu, Kwang-Won;Jeong, Heon-Sang;Lee, Hyeon-Yong;Jeong, Jae-Hyun
Korean Journal of Food Science and Technology
/
v.42
no.1
/
pp.82-89
/
2010
To obtain functional materials from a submerged culture of Hericium erinaceum, a suitable basal medium for flask culture was screened and the optimal culture conditions in a jar fermenter were investigated with the addition of ginseng extracts (GE) to the basal liquid medium. Of all tested basal liquid media, the mushroom complete medium (MCM) supplemented with 0.5% of GE produced the highest mycelial dry weight (MDW) of 5.91 g/L in the flask, which reached a plateau at $25^{\circ}C$, pH 5.5 after 10 days. The submerged culture conditions for the mass production of mycelia in a 50 L jar fermenter were also optimal at $25^{\circ}C$, pH 5.5, 120 rpm agitation speed and 0.4 vvm aeration rate. Under these conditions, the maximum MDW was produced, which reached a value of 4.28 g/L within 5 days. When we investigated the effects of the amount of GE in the MCM on the production of MDW in the jar fermenter, the addition of 5% GE (HE-GE-5) under the optimal culture conditions produced the maximum MDW (4.93 g/L). In addition, the crude polysaccharide of HE-GE-5 contained mainly neutral sugars (63.2%) with considerable amounts of uronic acid (19.3%) and a small amount of proteins (8.8%) and it had potent immunostimulation properties.
Lim, Han Hyuk;Song, Wung Joo;Kim, Gu-Hwan;Watkins, David;Rosenblatt, David S.;Kim, Yoo-Mi;Chang, Mea Young;Kil, Hong Ryang;Kim, Sook Za
Journal of The Korean Society of Inherited Metabolic disease
/
v.19
no.1
/
pp.12-19
/
2019
Purpose: Isolated methylmalonic acidemia (MMA) is an autosomal recessive inherited disorder of propionate metabolism. There are two subtypes of MMUT gene defects. $Mut^0$ represents complete loss of methylmalonyl-CoA mutase (MCM) activity while mut- is associated with residual MCM activity, which can be stimulated by hydroxocobalamin (OHCbl) supplementation. The objective of this study is to investigate cobalamin responsiveness and mutations present in Korean MMA population. Methods: We evaluated 10 MMA patients using somatic cell complementation analysis on their fibroblasts to measure MCM activity and vitamin B12 responsiveness for the optimal treatment. MMUT gene was sequenced to identify the MMA mutations. Results: For all patients, the incorporation of $[^{14}C]-propionate$ was low, and there was no response to OHCbl. The incorporation of $[^{14}C]-methyltetrahydrofolate$ and $[^{57}Co]-CNCbl$ fell within the normal range. There was adequate synthesis of methylcobalamin while the synthesis of adenosylcobalamin was low. The complementation analysis showed all patients were $mut^0$. The sequence analysis identified 12 different MMUT mutations, including 2 novel mutations, p.Gln267Ter and p.Ile697Phe, were identified. All the patients in this study had neonatal onset of symptoms, belonged to $mut^0$ complementation class, and as a result, showed no cobalamin responsiveness. Conclusion: No Korean MMA patient showed cobalamin responsiveness.
The culture conditions were investigated to maximize the production of laccase from Fomitella fraxinea mycelia. Among the tested media, mushroom complete medium (MCM) showed the highest production of the enzyme. The optimum culture medium was 2% dextrose, 0.4% $(NH_4)_{2}HPO_4$, 0.05% $Na_{2}HPO_{4}{\cdot}7H_{2}O$, and 0.05% KCl as carbon, nitrogen, phosphorus, and inorganic salt sources respectively. SDS-PAGE followed by laccase activity staining using 2,6-djmethoxyphenol as the substrate was performed to identify the laccase activity under culture conditions studied. Zymogram analysis of the culture supernatant showed a laccase band with a molecular mass of 50 kDa. The enzyme production from F. fraxinea was reached to the highest level after the cultivation for 10 days at $25^{\circ}C$ and initial pH 8. The enzyme activity of the culture supernatant was most active at $50^{\circ}C$ and pH 5.
Journal of the Korean Crystal Growth and Crystal Technology
/
v.16
no.1
/
pp.43-48
/
2006
In this Part 2, the grain growth processes of $Al_2O_3$ ceramics is numerically simulated using Monte Carlo method (MCM) and finite element method (FEM) and the pore sizes are analyzed. As the green ceramics whose thermal conductivities in high temperatures are generally low are sintered by the plasma heat and are rapidly cooled, the grain growth of the sintered body in the center is different from that in the outer. Also, even in the same sintering temperature, the pore size differs according to the pressing pressure. In order to prove the difference, the temperature distribution of the sintered body was analyzed using the finite element method and then the grain growth process associated with pressing pressures and relative densities was simulated using Monte Carlo method.
Transactions of the Korean Society of Mechanical Engineers
/
v.17
no.6
/
pp.1321-1329
/
1993
Long time creep strength and life prediction of 1% Cr-Mo-V and 12% Cr rotor steel were performed by using round-bar type specimens under static load at 500-600.deg. C TTP (time temperature parameter), MCM (minimum commitment method) and ISM (initial strain method newly devised) as life prediction methods were investigated, and the results could be summarized as follows. (1) The minimum parameter of SEE (standard error) by TTP was proved as LMP (larson-miller parameter), and the minimum parameter of RMS (root mean squares), by data less than 10$^{3}$hrs was MHP (manson-haferd parameter). (2) The parameters of the minimum and the maximum strength values predicted in $10^{5}$hrs creep life of 1% Cr-Mo-V steel by TTP were LMP and MSP, respectively. In case of 12% Cr steel above $550^{\circ}C$ OSDP (orr-sherby-dorn parameter) was minimum and MSP (manson-succop parameter) was maximum, but below $550^{\circ}C$, the inverse phenomena was observed. On the other hand the creep strengths before $10^{3}hrs$ life by MCM were similar to those by TTP, but the strengths after $10^{3}hrs$ life were 10-25% lower than those by TTP. (3) Creep strengths by ISM were maximum 5% lower than those by TTP. Because $10^{5}hrs$ strengths were similar to those of the lower band by TTP, the ISM was safer than the TTP.
티타늄과 산소의 함량이 서로 다른 4가지의 합성 페롭스카이트형(perovskite-type) 광물(($K_2$$La_2$$Ti_{n}$/$O_{2n+4}$, n=3, 4, 5, 6; 14/mcm, 14/mmm, I42 m)을 대상으로 리트벨트(Rietveld)구조분석법을 실시하여 결정구조를 밝히고 티타늄함량에 따른 층상형 구조를 연구하였다. 4가지 합성시료에 대하여 구조분석을 실시한결과 대표적인 페롭스카이트형 광물인 토소나이트(taustonite, $La_{1-x}$ //$K_{x}$ /$TiO_3$, x<0.4)가 주성분으로 나타났으며 토스나이트내에 12개의 산소를 배위하는 A자리 양이온은 자리점유율에 의해 $La^{3+}$ 와 $K^{+}$ /의 치환관계를 보여준다 공간군은 14/mcm, 단위포는 a=5.505(1)~5.510(1)$\AA$, c=7.793(1)~7.796(1)$\AA$ V=236.25~236.66 $\AA^3$ 범위의 값을 갖는다. 구조의 정밀도를 나타내는 R지수를 살펴보면 $R_{B}$ 값은 5.31~9.10 S(GofF)값은 0.86~1.24로 각각 계산되었다. 12배위를 하는 A자리 양이온인 란탄과 산소의 평균거리는 2.755$\AA$이고 6배위를 하는 B자리 양이온인 티타늄과 산소의 평균거리는 1.948 $\AA$의 결과를 얻었다. 합성된페롭스카이트형 광물의 층상구조가 알려져 있지 않아 시뮬레이션을 통해 구조모델을 결정하였으며 그결과 n=3인 R-38시료에서만 두 종류의 층상 페롭스카이트($La_2$$K_2$$Ti_3$$O_{10}$ ) 구조 (A-type: 14/mmm, a=3.8178 $\AA$, c=29.9189 $\AA$, V=436.04 $\AA^3$, B-type: 142 m, a =3.8376 $\AA$, c=28.023 $\AA$, V=412.6 $\AA^3$)가 존재함을 확인하였으나 다른 시료에서는 토소나이트, 금홍석 외에 새로운 합성광물로 제파이트의 존재를 확인하였다.
Yoo, C. S.;Lee, W. S.;Cho, H. M.;Lim, W.;Kwak, S. B.;Kang, N. K.;Park, J. C.
Journal of the Microelectronics and Packaging Society
/
v.6
no.4
/
pp.49-53
/
1999
In this study, the characteristics of the structure of buried type capacitor for RF multi- chip-module are investigated. We developed many kinds of structures to minimize the space of capacitor in module and the value of parastic series inductance without any loss in capacitance, and in this procedure the effect of vias especially position, size, number length are analyzed and optimized. This characteristics of structures are checked through HFSS(high frequency structure simulator) of HP, and the value of parastic series inductance is calculated by equivalent circuit analysis. And ensuing the result of simulation, we made buried type capacitors using LTCC (low temperature cofired ceramic) material. In measurement of this sample, we found out the effective and precise method can be applied to buried type and characteristics of vias and striplines added for measuring are quantified.
The results of examining characteristics of mycelial growth and culture condition for determining the condition of artificially culturing Fomitopsis pinicola are as follows. 1) Mycelial growth and density of F. pinicola. were the highest in the medium of PIDA(Pine Dextrose Agar;66.3mm/10d) followed by the order of GDA, PDA, CDA, PODA, ODA, YM, MCM, MEA(pH 4.7), CHA, and MEA(pH 4.7). 2) Optimal temperature for the mycelial growth and density of F. pinicola were shown to be $30^{\circ}C$, but the mycelia were dead at $40^{\circ}C$. the mycelial growth and density of KNAC9005 strains was the highest at $30^{\circ}C$(66.3mm/10d) followed by the order of 25, 20, 15, 35, 10, and $5^{\circ}C$. 3) Optimal pH for the mycelial growth and density of $40^{\circ}C$ was revealed to be 6.0(88.4mm/10d). above or below pH 6.0, the mycelial growth and density were shown to be retarded. 4) Optimal carbon, nitrogen and organic acid sources for the spawn growth of $40^{\circ}C$ were maltose(331mg/25ml/15d), peptone(347mg/25ml/15d), and glutamic acid(357mg/25ml/15d), respectively. Optimal level of biotin was 370mg/15d and optimal C/N ratio was 40.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.