• Journal of KIISE:Information Networking
• /
• v.37 no.3
• /
• pp.234-242
• /
• 2010

The demand on various broadcasting services has been greatly increasing in the area of mobile communication. In IEEE802.16e standard and mobile WiMAX, the multicast broadcast service (MBS) uses shared downlink channel for efficiently supporting a number of users. In this paper we propose a dynamic modulation and coding scheme with relay network to enhance the performance of MBS. The proposed approach employs the adaptive modulation and coding scheme for both the base station and relay station to achieve consistently high throughput. The result of computer simulation with NS-2 shows that the throughput and transmission time are significantly improved by using the proposed approach compared to the existing schemes having a fixed modulation level for the RSs.

• Journal of Mechanical Science and Technology
• /
• v.19 no.spc1
• /
• pp.461-472
• /
• 2005

A formulation for flexible multibody systems (MBS) is investigated, where rigid MBS substructures are coupled with flexible bodies described by a nonlinear finite element (FE) approach. Several aspects that turned out to be crucial for the presented approach are discussed. The system describing equations are given in differential algebraic form (DAE), where many sophisticated solvers exist. In this paper the performance of several solvers is investigated regarding their suitability for the application to the usually highly stiff DAE. The substructures are connected with each other by nonlinear algebraic constraint equations. Further, partial derivatives of the constraints are required, which often leads to extensive algebraic trans-formations. Handcoding of analytically determined derivatives is compared to an approach utilizing algorithmic differentiation.

• Journal of KIISE:Information Networking
• /
• v.35 no.3
• /
• pp.227-234
• /
• 2008

The development of wireless network technology allows high data rate seamless communication irrespective of the place and time in various emerging mobile service environment. Unlike wired networks, however, wireless networks utilize expensive limited bandwidth. MBS(Multicast Broadcast Service), which is supported by mobile WiMAX system based on IEEE802.16e, overcomes this problem using a shared downlink channel for efficiently supporting a number of users. However. the coverage and throughput of the system are significantly affected by the channel condition. In this paper we propose on MBS system employing Mobile Multi-Hop Relay(MMR) and adaptive modulation and coding(AMC) scheme. The result of NS-2 computer simulation shows that the throughput and transmission time are substantially improved by the proposed approach compared to the existing MBS system.

• Journal of Communications and Networks
• /
• v.16 no.6
• /
• pp.627-638
• /
• 2014

In this paper, we study the joint price and power allocation in spectrum sharing macro-femtocell networks. The proposed game theoretic framework is based on bi-level Stackelberg game where macro base station (MBS) works as a leader and underlaid femto base stations (FBSs) work as followers. MBS has fixed data rate and imposes interference price on FBSs for maintaining its data rate and earns revenue while FBSs jointly adjust their power for maximizing their data rates and utility functions. Since the interference from FBSs to macro user equipment is kept under a given threshold and FBSs compete against each other for power allocation, there is a need to determine a power allocation strategy which converges to Stackelberg equilibrium. We consider two cases for MBS power allocation, i.e., fixed and dynamic power. MBS can adjust its power in case of dynamic power allocation according to its minimum data rate requirement and number of FBSs willing to share the spectrum. For both cases we consider uniform and non-uniform pricing where MBS charges same price to all FBSs for uniform pricing and different price to each FBS for non-uniform pricing according to its induced interference. We obtain unique closed form solution for each case if the co-interference at FBSs is assumed fixed. And an iterative algorithm which converges rapidly is also proposed to take into account the effect of co-tier interference on interference price and power allocation strategy. The results are explained with numerical simulation examples which validate the effectiveness of our proposed solutions.

• The korean journal of orthodontics
• /
• v.52 no.6
• /
• pp.451-460
• /
• 2022

Moebius syndrome (MBS) is a congenital neurologic disorder that causes cranio-facial abnormalities. It involves paralysis of the VI and VII cranial nerves and causes bilateral or unilateral facial paralysis, eye movement disorder, and deformation of the upper and lower limbs. The orofacial dysfunctions include microstomia, micrognathia, hypotonic mimetic and lip muscles, dental enamel hypoplasia, tongue deformity, open bite or deep overbite, maxillary hypoplasia, high arched palate, mandibular hyperplasia or features indicating mandibular hypoplasia. This case report presents a 7-year-old male patient who was diagnosed with MBS at the age 2 years. The patient displayed typical clinical symptoms and was diagnosed with Class II malocclusion with a large overjet/overbite, tongue deformity and motion limitation, and lip closure incompetency. Treatment was initiated using a removable appliance for left scissor bite correction. After permanent tooth eruption, fixed appliance treatment was performed for correction of the arch width discrepancy and deep overbite. A self-ligation system and wide-width arch form wire were used during the treatment to expand the arch width. After 30 months of phase II treatment, the alignment of the dental arch and stable molar occlusion was achieved. Function and occlusion remained stable with a Class I canine and molar relationship, and a normal overjet/overbite was maintained after 9.4 years of retainer use. In MBS patients, it is important to achieve an accurate early diagnosis, and implement a multidisciplinary treatment approach and long-term retention and follow-up.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.96.6-96
• /
• 2001

A high peak power demand at substations will result under Moving Block Signalling (MBS) when a dense queue of trains begins to start from a complete stop at the same time in an electrified railway system. This may cause the power supply interruption and in turn affect the train service substantially. In a recent study, measures of Starting Time Delay (STD) and Acceleration Rate Limit (ARL) are the possible approaches to reduce the peak power demand on the supply system under MBS. Nevertheless, there is no well-defined relationship between the two measures and peak power demand reduction (PDR). In order to attain a lower peak demand at substations on different traffic conditions and system requirements, an expert system is one of the possible approaches to procure the appropriate use of peak demand reduction measures ...

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.6
• /
• pp.205-212
• /
• 2003

Because a wireless ad hoc network does not have fixed infrastructure, a call admission control approach researched in a wireless network is not feasible to this network. In this paper, we propose call admission control scheme to support this problem and the burst handoff traffic due to group mobility in a wireless ad hoc network. This scheme is an adaptive guard channel scheme which adapt the number of guard channels in each MBS(mobile base station) according to the current estimate of the potential handoff call rate derived from the number of ongoing calls within the coverage area of an MBS that initiate group handoff in a wireless ad hoc network. Our simulation studies are performed for comparisons of the proposed scheme with the other channel allocation schemes. Simulation results show that the proposed scheme efficiently reduces handoff call blocking probability in wireless ad hoc networks.

• IE interfaces
• /
• v.10 no.1
• /
• pp.37-45
• /
• 1997

본 연구에서는 웨이퍼 팹공정에서 웨이퍼 로트들이 뱃치공정을 위해 확률적으로 도착되는 상황에서 최적 뱃치크기를 결정하는 뱃칭문제를 다루고 있다. 뱃치공정이란 여러 개의 웨이퍼 로트들을 기계의 용량을 넘지 않는 한도 내에서 하나의 뱃치로 구성하여 한꺼번에 가공하는 공정을 말한다. 목적함수는 생산율을 높이고 재공재고 및 사이클타임을 줄이기 위해 웨이퍼 로트들의 평균 대기시간의 최소화를 채택하였다. 문제의 해결을 위해서, 확률적인 상황변동 하에서 실시간 제어를 위해 많이 활용되고 있는 신경회로망 중 다층 퍼셉트론을 이용한 뱃치크기 결정 모델을 제시하였다. 제시한 모델의 효율성을 확인하기 위해 기존에 잘 알려져 있는 최저뱃치크기(MBS) 규칙과 실험, 비교하였다.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2003.11a
• /
• pp.112-117
• /
• 2003

The purpose of this work is to general approach to numerically simulating wear in rolling and sliding contact area between wheel and rail interface based on the analysis of dynamics with general MBS package. A simulation scheme is developed that calculates the wear at a detailed level. The estimation of material removal follows Archard's wear equation which states that the reduction of volume is linearly proportional to the sliding distance, the normal applied load and the wear coefficient and inverse proportional to hardness. The main research application is the wheel-rail contact of Korea High Speed Railway.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.613-616
• /
• 2012

A multi body simulation (MBS) model is developed for predicting the impact harshness of the vehicle. Impact harshness is the vehicle performance to evaluate the impulsive vibration behavior during driving over an obstacle of the road. Thus, the approach is simulated on the time domain for considering the transient behavior of the vehicle. The validity of vehicle component modeling of bushes, dampers and structure flexibilities is verified. The simulations are compared with the test results in both of vertical and longitudinal directions. In particular, the vertical vibration of the vehicle is significantly affected by the body flexibility. Through the sensitivity analysis, main factors for the impact harshness performance are investigated.