• 한국컴퓨터정보학회논문지
• /
• 제28권5호
• /
• pp.163-170
• /
• 2023

제4차 산업혁명의 가속화에 따라 해운산업에서는 자율운항선박(MASS)의 기술 개발 및 발전이 이루어지고 있으며, 이에 따른 국제 규정의 개발 역시 가속화되고 있다. 특히 IMO 해사안전위원회(MSC) 105차 회의에서는 회원 당사국 간 비강제적 자율운항선박 규정(MASS Code) 개발을 위한 로드맵을 수립하고 본격적으로 규정 개발에 착수하였다. 다수의 국가가 MASS Code 개발 작업에 적극적으로 참여하고 있으며, MASS Code에서 MASS 기능에 대한 상세한 요구사항에 대한 규정 개발 작업이 진행중이다. 특히, 자율운항선박의 자율도와 관련하여 "운항 모드(Mode of Operation)" 개념이 처음으로 언급되었으며, 2023년 4월에 개최될 IMO 자율운항선박 공동작업반(MASS JWG) 회의부터 이 운항 모드에 대한 논의가 진행될 것으로 예상된다. "운항 모드" 개념은 MASS 및 MASS 기능에 대한 설명과 더불어, MASS Code 개발을 위해 지속되어 논의될 것이다. 이 논문은 운항 모드 설정에 대한 기초연구를 수행하기 위해 운항 모드에 대한 지침을 제공하는 IMCA M 220 문서의 내용을 검토한다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2023년도 춘계학술대회
• /
• pp.162-163
• /
• 2023

As the development of the 4^th industiral revolution in the maritime industry has progressed, the technical development of autonomous ships, and the development of international regulations have been accelerated. In particular, the IMO Maritime Safety Committee(MSC) has established a road-map for the development of the non-mandatory goal-based MASS instrument(MASS Code) and started developing a non-mandatory MASS Code at MSC 105^th meeting. Many countries are actively participating in the Correspondence Group on the development of MASS Code, and the development of detailed requirements for MASS functions in the MASS Code is underway. Especially, the concept of "Mode of Operation" for MASS functions was mentioned in the Correspondence Group for the first time, and it is expected that discussions on these modes will be conducted from the IMO MASS JWG meeting to held in April 2023. The concept of "Mode of Operation" will be useful in explaining MASS and MASS functions and will be discussed in the future for the development of MASS Code. This paper reviews the contents of the IMCA M 220 document, which provides guidelines on operating modes, to conduct research on the benchmark for setting the operating modes of MASS.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2023년도 춘계학술대회
• /
• pp.223-224
• /
• 2023

국제해사기구에서는 2024년 초안을 개발하고 25년 승인하기 위한 로드맵을 수립하였고 이를 기반으로 자율운항선박 운항을 위한 MASS Code 개발에 착수하였다. 2025년 승인 이후부터 2028년 발효까지 선급에서는 MASS 코드에 부합하는 규정을 개발해야 한다. 기존 GBS는 기존에 운용되어온 시스템을 대상으로 개발되었으나 MASS Code는 아직 경험해 보지 않은 선박을 대상으로 하기 때문에 합의에 이르는 과정이 순탄하지 않을 것으로 보인다. 따라서, 우선 자율시스템이 적용가능한 시스템을 분석하고 공통적으로 갖는 구조적인 특징을 분석하는 것이 필요하다.

• Journal of Mechanical Science and Technology
• /
• 제17권3호
• /
• pp.457-466
• /
• 2003

In this paper, the numerical finite element formulations were derived for the linearized Navier-Stokes' equations with assumptions of two-dimensional incompressible, homogeneous viscous fluid field, and small oscillation and the FAMD (Fluid Added Mass and Damping) code was developed for practical applications calculating the fluid added mass and damping. In formulations, a fluid domain is discretized with C$\^$0/-type quadratic quadrilateral elements containing eight nodes using a mixed interpolation method, i.e., the interpolation function for the velocity variable is approximated by a quadratic function based on all eight nodal points and the interpolation function for the pressure variable is approximated by a linear function based on the four nodal points at vertices. Using the developed code, the various characteristics of the fluid added mass and damping are investigated for the concentric cylindrical shell and the actual hexagon arrays of the liquid metal reactor cores.

• 국제초고층학회논문집
• /
• 제9권3호
• /
• pp.261-271
• /
• 2020

The 2020 National Building Code of Canada (NBC) and the 2021 International Building Code (IBC) both include Tall Wood Buildings (TWB) and are hailed as documents responsible for the proliferation of Mass Timber construction. Mass Timber construction is critical to reducing the carbon footprint of the construction industry; a sector acknowledged as being one of the greatest contributors of global annual CO₂ emissions. Origine, a 13-storey multi-residential building erected in 2017 in a previously unsuitable site, is currently the tallest all-wood building in North America. This article describes the challenges overcome by the designers and client as they engaged with code officials, building authorities, and fire-service representatives to demonstrate the life-safety performance of this innovative building. It also traces the development of the "Guide for Mass Timber Buildings of up to 12 Storeys" published in Quebec and how it has enabled other significant Tall Wood projects across North America.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2023년도 춘계학술대회
• /
• pp.221-222
• /
• 2023

국제해사기구(IMO)는 자율운항선박(MASS)의 안전한 운항을 위해 해사안전위원회(MSC), 법률위원회(LEG) 및 해상교통간소화위원회(FAL)에서 협약규정식별작업(RSE)을 완료하고 각 위원회별로 MASS의 안전한 운항을 위한 조치방안에 대해 검토 중에 있다. RSE 결과를 반영하여 향후 MASS Code 개발과정에서 원격운항자(Remote Operator)가 중요한 검토사항이 될 것으로 식별됨에 따라 원격운항자가 갖추어야 할 최저역량에 대해 제시하였다. 또한 MASS Code 개발과정에서 논의될 운항모드(Mode of Operation)에서 원격운항자에게 필요한 역량에 대해서도 검토하였다.

• 반도체디스플레이기술학회지
• /
• 제19권3호
• /
• pp.112-117
• /
• 2020

NAND flash memory is a non-volatile memory that retains stored data even without power supply. Internal memory used as a data storage device and solid-state drive (SSD) is used in portable devices such as smartphones and digital cameras. However, NAND flash memory carries the risk of electric shock, which can cause errors during read/write operations, so use error correction codes to ensure reliability. It efficiently recovers bad block information, which is a defect in NAND flash memory. BBT (Bad Block Table) is configured to manage data to increase stability, and as a result of experimenting with the error correction code algorithm, the bit error rate per page unit of 4Mbytes memory was on average 0ppm, and 100ppm without error correction code. Through the error correction code algorithm, data stability and reliability can be improved.

• 전기학회논문지
• /
• 제59권2호
• /
• pp.417-422
• /
• 2010

When memory devices are exposed to space environments, they suffer various effects such as SEU(Single Event Upset). Memory systems for space applications are generally equipped with error detection and correction(EDAC) logics against SEUs. In this paper, several error detection and correction codes - RS(10,8) code, (7,4) Hamming code and (16,8) code - are analyzed and compared with each other. Each code is implemented using VHDL and its performances(encoding/decoding speed, required memory size) are compared. Also the failure probability equation of each EDAC code is derived, and the probability value is analyzed for various occurrence rates of SEUs which the STSAT-3 possibly suffers. Finally, the EDAC algorithm for STSAT-3 is determined based on the comparison results.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2023년도 춘계학술대회
• /
• pp.219-220
• /
• 2023

인공지능(AI), 사물인터넷(IoT) 등 관련 기술의 발전으로 자율운항선박 상용화가 임박하게 되었다. 국제해사기구(IMO)는 새로운 기술도입을 촉진하는 한편, 신기술 도입에 따른 위험을 최소화하기 위하여 자율운항선박 협약(MASS Code)을 개발하고 있다. 대한민국 또한 '자율운항선박 기술개발 사업(KASS)' 추진을 통하여 기술개발과 핵심기술의 국제표준화를 추진하고 있다. 이 연구에서는 현재까지 협약 개발의 국제적 현황을 분석 후 대한민국 핵심기술을 국제적으로 표준화하기 위한 대응방안에 대해 제시하였다.

• 한국해양공학회지
• /
• 제33권5호
• /
• pp.400-410
• /
• 2019

In this study, the numerical code for the 3D nonlinear dynamic analysis of an SLWR (Steel Lazy Wave Riser) was developed using the lumped mass line model in a FORTRAN environment. Because the lumped mass line model is an explicit method, there is no matrix operation. Thus, the numerical algorithm is simple and fast. In the lumped mass line model, the equations of motion for the riser were derived by applying the various forces acting on each node of the line. The applied forces at the node of the riser consisted of the tension, shear force due to the bending moment, gravitational force, buoyancy force, riser/ground contact force, and hydrodynamic force based on the Morison equation. Time integration was carried out using a Runge-Kutta fourth-order method, which is known to be stable and accurate. To validate the accuracy of the developed numerical code, simulations using the commercial software OrcaFlex were carried out simultaneously and compared with the results of the developed numerical code. To understand the nonlinear dynamic characteristics of an SLWR, dynamic simulations of SLWRs excited at the hang-off point and of SLWRs in regular waves were carried out. From the results of these dynamic simulations, the displacements at the maximum bending moments at important points of the design, like the hang-off point, sagging point, hogging points, and touch-down point, were observed and analyzed.