• 전기의세계
• /
• v.14 no.6
• /
• pp.8-13
• /
• 1965

The TRIGA Mark-II Reactor is very simple to analyze the dynamic characteristics, so that the heat transfer function of the reactor fuel rod is able to be considered as a over-all feedback transfer function. The heat transfer dynamics of the fuel rod is derived under some assumptions. And the over-all reactor transfer function is analytically calcu- lated and it is compared with the measured value. The reactor dynamics and the stability are analyzed by means of the Root-Locus and the Nyquist.

• Korean Journal of Medicinal Crop Science
• /
• v.14 no.2
• /
• pp.117-123
• /
• 2006

The purpose is to study the identification method of Huangjinju powder for injection and the medicinal materials by the fingerprint off-ray Diffraction Fourier (XRDF). We used the same method on both the studying of Huangjinju and the medicinal materials. Then we selected a few components alignment to compare. We analyzed the data by setting up the deviation $d({\AA})$ as ${\pm}0.05$ to calculate the rate of special mark on the sample (Px) and on the patent (P). The special XRDF of Huangjinju$[d({\AA})/(I/I_0)]$ have 5 peaks that have not expressed in medicinal materials. Therefore Px is 22.73%. Flos Trollii Chinensis has 3 special marks and Px is 17.65%. Flos Chrysanthemi Indici has 1 special mark and Px is 3.57%. Its coincided interplanar spacing with the patent is $2.907{\AA}$. Flos Lonicerae Japonicae has 6 special marks and Px is 23.08%. Its special mark in the patent are 4.95/14 and 4.50/15, respectively. The P is 9.09%. Its coincided interplanar spacing with the patent is $2.910{\AA}\;and\;3.05{\AA}$, respectively. The number of special XRDF mark peaks of baicalin is 9 and Px is 18.37%. Its coincided interplanar spacing with the patent is $2.910{\AA}$. It has visible mark and specificity adopting XRDF fingerprint to identify Huangjinju and medicinal materials. Establishing the quality standard is a synthetic index that depends both on special marks in the medicinal materials of the patent and on the coincidence peak data.

• The Korean Journal of Quaternary Research
• /
• v.14 no.1
• /
• pp.1-5
• /
• 2000

During the last three years (1997∼2000), a research project of beach dynamic environmental process and dynamic nature of the Nobong Beach, East Sea of Korea has been carried out for a better understanding of beach cycle (winter and summer). In fact, however, this paper deals with a particular feature of beach dynamics, that is, overwash process of overwash water and its sediments. The overwash mark sediments (OMS) are analyzed to understand various textural characters.

• Journal of Korean Physical Therapy Science
• /
• v.1 no.1
• /
• pp.135-144
• /
• 1994

The authors studied therapeutic effects and related clinical data retrospectively on a series of 48 consecutive patients with head injury who were referred to physical therapy and occupational therapy, Kosin University Medical Center during 1 year, from March, 1993. through March, 1994. The conclusions were as follows : 1. Average age of the subject patients was 50.6 years, their age remped from 14 to 72 years, and the incidence between male and femele was 1:1.1. 2. In respect to the educational level high school graduates showed the highest incidence 18 (39.1 %) of 46 cases, and in respect to economy level, middle class revealed the highest incidence, 31(64.6 %) in 48 cases. 3. The HBP was the most common cause of spontaneity injury, disclosing 19 cases in 35 patients(54.3%), whereas the main cause of traumatic injury was a traffic accident, 7 cases ( 53.8 %) in 13 patients. 4. As for the region of injury in the cases of spontaneity ICH was 14 persons (40%). In the cases of trauma, hematoma was seen in 6 cases(42.2 %) in 48 total cases ICH was seen in 17 cases (35.4 %) to be the most common region. 5. Among 35 persons, spontaneity CBR was the highest region of injury, 13 cases(37.1 %) ; the side of paralysis in extremities the right side showed higher incidence, 18 cas (1.4 %) as compared to the left, 16 cases(45.7%). In the case of traumatic injury, CBR was the highest region of injury, 4(30.8% )in 13 cases and as for the paralysis side, right side showed higher incidence 7 cases(53.8%) as compared to the left side 5 cases(38.5%). 6. In respect to recurrence, HBP was seen in 5 cases to be the most common cause, and as for the region of injury, CBR was the highest. 7. A period of rehabilitation therapy in the cases of physical therapy the highest term was 1-2 month, 14 persons(29.2%). As for occupational therapy within 2 week-term was the highest, 24 persons(50%). 8. Physical strenth grade M.T in the cases of the upper extrimities before therapy, the low mark(grade 0) was 30 cases(62.5%), compared to the high mark(above grade 3)seen in 1 case(2.1%), And after therapy, the lowest mark(grade 0)was seen in 5 cases(10.4%) where as the high mark(above grade 3)was seen in 29 cases(60.4%). In the case of the lower extremities before therapy, the mark(below grade 1)was 37 cases(77.1 %), while the high mark(above grade 3)was seen n 4 cases(8.4%). And after therapy the low mark(below grade 1)was seen in 5 cases (10.4 %) and the high mark (above grade 3)was seen in 29 cases(60.4 %). 9. Before therapy conigtive function-level evaluation utilized R.L.A.L, the low mark(below level 3)was seen in 9 cases(18.8%), while the high mark(above level 7)was seen in 18 cases(37.5%). And after therapy the low mark (below level 3)was 4 cases(8.3%) and high mark(above level 7)was seen in 38 cases(79%). 10. After rehabilitation therapy, patients who were able to walk independently were 29 persons(60.4%), among which 16 cases(55.2%) depended on cane. The ratio between the cases who were able to walk and unable to walk was 1.5:1.

• Nuclear industry
• /
• v.19 no.6 s.196
• /
• pp.4-14
• /
• 1999

• 한국게임학회지
• /
• v.5 no.1
• /
• pp.14-23
• /
• 2008

• Korean Journal of Optics and Photonics
• /
• v.14 no.4
• /
• pp.377-382
• /
• 2003

We propose a new optical watermarking method, which can protect the copyright of digital data, using a binary phase hologram and a Mach-Zehnder interferometer. Using a simulated annealing algorithm, the binary phase hologram of the mark image to be hidden is designed. We obtained a watermarked image by linearly superposing the hologram, which is the watermark, in the original image. The extraction processing of the mark image from the watermarked image is achieved by placing the phase-modulated watermarked image on a LCD in one path and the phase-modulated original image on another LCD in the other path in the Mach-Zehnder interferometer. The mark image was obtained by inverse Fourier transforming the phase modulated interference intensity. We confirmed that the proposed method is robust for the cropped images through computer simulation, and we implemented it optically using LCDs which are phase modulation devices.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.1
• /
• pp.29-35
• /
• 2015

In this study, a FEM analysis is undertaken of a rubber sleeve which is mounted onto a spreading mandrel so as to avoid marking the first wrappings of coils (known as the 'end-mark'), as occasionally occurs when a concentrated load is placed on the edge of a steel sheet, significantly reducing its quality. A commercial numerical package, ANSYS, was utilized to analyze the structural behavior of the rubber sleeve. In general, the strain of the sleeve increases as the thickness of the rubber layer (H) covering the tubes increases, thus also increasing the surface of the sleeve for a constant boundary condition, and decreasing the pitch (P) between each tube, resulting in an increase in the strain on the surface of the sleeve for all rubber thickness conditions tested here. In a comparison of two different materials, rubber and urethane, when H=3 mm and P=1.1D, the maximum total deformations in these cases are 0.12669 mm and 0.086623 mm, respectively.

• The KIPS Transactions:PartD
• /
• v.14D no.4 s.114
• /
• pp.447-458
• /
• 2007

The objective of this study is to provide faster mobile web service by improving performance of Contents Cache used for mobile web service in the existing Mobile Gate System. It was found that two elements existed in Mark-Up page transcoded by Contents Generator. One of the elements was dependent only on the requested DIDL page and Mark-Up type. The other was dependent on each of the requested DIDL page, Mark-Up type, size of mobile display 모바일 장치 to request service, type of images available and color depth count of the images available. The conventional Contents Cache saved the entire Mark-Up page to hold both of the two elements. This caused the problem where storage space was not effectively used because reusable elements were repetitively saved in cache memory domain due to change in one of the elements even though all the other elements were the same. As a result, a larger number of transcoded Mark-Up pages could not be saved in the same cache memory size. Therefore, in this study, Mark-Up pages transcoded by Contents Generator were divided into two elements and were separately saved. Also, in order to respond to the demand for replacing data in cache with new data, this study applied two algorithms of LFU and LRU. This study proposed the method to implement cache performance of faster speed by enabling to save more number of the transcoded Mark-Up pages in the same cache storage space.

• Journal of the Korean Magnetics Society
• /
• v.14 no.2
• /
• pp.65-70
• /
• 2004

Read out signal and temperature distribution of magnetic amplifying magnetooptical disk were studied. Temperature distribution of recording layer and adjacent layers were calculated when the disk was at rest. Mark size, length and location were simulated from a chain of recording beam pulses. In addition, signal amplitude depending on the shape of the marks, readout signals from the recording layer and amplified marks of the readout layer, were simulated. Simplified thermal conduction model was used to calculate the temperature distribution of recording and adjacent layers as a function of time as well as to calculate the mark size, length and location. Readout signal was calculated by the convolution of the disk reflectivity and the Gaussian beam intensity. Readout signal from the mark in the readout layer amplified to the size of the laser beam fumed out to be twice as large as the signal from the crescent shaped mark in the recording layer.