• 한국방사선학회논문지
• /
• 제15권3호
• /
• pp.273-279
• /
• 2021

전산화단층촬영 검사 시 인체 내에 삽입되어 있는 금속물질은 금속주위에 있는 인체조직이나 뼈와 큰 밀도차이가 있어 인공물을 발생시킨다. 이 실험을 통해 Single source Dual energy CT에서 Dual energy검사 및 MAR 알고리즘의 특성을 비교분석하여 임상적으로 적용방법에 대한 기초자료를 제시하려 한다. MAR 알고리즘을 적용하거나 Dual Energy를 이용하여 검사하였을 때 금속 인공물이 감소하였는데 MAR알고리즘을 적용한 영상은 세부적인 부분을 왜곡시키는 단점이 있다. Dual Energy로 검사한 영상은 MAR알고리즘을 적용한 영상보다 세부적인 부분까지 구현해 낼 수 있다는 장점이 있으나 재구성에 소요되는 시간이 길며 피폭선량이 MAR알고리즘을 적용한 영상보다 약 4배 가량 높았다. 수술 후 Follow up 및 금속물질의 위치를 파악하기 위해서는 MAR알고리즘을 적용하여 영상을 획득하는 것이 검사적 측면에서 유용하며 미세 병변 확인 및 수술계획을 세우거나 진단적인 측면에서 검사를 시행하였을 때는 Dual Energy로 검사하는 것이 더 유용하다.

• Journal of Ginseng Research
• /
• 제37권3호
• /
• pp.332-340
• /
• 2013

In this study, gamma rays were used to irradiate embryogenic calli induced from cotyledon explants of Panax ginseng Meyer. After the embryogenic calli were irradiated, they were transferred to adventitious roots using an induction medium; next, mutated adventitious root (MAR) lines with a high frequency of adventitious root formations were selected. Two MAR lines (MAR 5-2 and MAR 5-9) from the calli treated with 50 Gy of gamma rays were cultured on an $NH_4NO_3$-free Murashige and Skoog medium with indole-3-butyric acid 3 mg/L. The expression of genes related to ginsenoside biosynthesis was analyzed using reverse transcription polymerase chain reaction with RNA prepared from native ginseng (NG), non-irradiated adventitious root (NAR) and 2 MAR lines. The expression of the squalene epoxidase and dammarenediol synthase genes was increased in the MAR 5-2 line, whereas the phytosterol synthase was increased in the MAR 5-9 line. The content and pattern of major ginsenosides (Rb1, Rb2, Rc, Rd, Re, Rf, and Rg1) were analyzed in the NG, NAR, and 2 MAR lines (MAR 5-2 and MAR 5-9) using TLC and HPLC. In the TLC analysis, the ginsenoside patterns in the NG, NAR, and 2 MAR lines were similar; in contrast, the MAR 5-9 line showed strong bands of primary ginsenosides. In the HPLC analysis, compared with the NG, one new type of ginsenoside was observed in the NAR and 2 MAR lines, and another new type of ginsenoside was observed in the 2 MAR lines irradiated with gamma rays. The ginsenoside content of the MAR 5-9 line was significantly greater in comparison to the NG.

• Journal of Radiation Protection and Research
• /
• 제36권2호
• /
• pp.79-85
• /
• 2011

본 논고의 목적은 듀얼 에너지 시스템의 금속 인공물 감약 (MAR) 기법을 팬텀과 환자를 대상으로 적용하여보고 그 유용성에 대해서 알아보고자 한다. 사용한 장비는 GE사(社)의 750HD CT이고 AW 4.5 볼륨 share 4 워크스테이션에서 영상 분석을 하였다. 팬텀으로는 victoreen사(社)의 사람 모형 흉부팬텀을 사용하였고 사람 대상은 2010년 12월 20일부터 2011년 2월 10일까지 금속물질이 삽입된 환자 25명을 대상으로 목 부위와 복부 부위에 MAR 알고리즘을 적용하였다. 사용한 파라미터는 복부검사의 경우 GSI-4Body-Large 0.9 sec 40 mm이고 목 부위에서는 GSI-3Body-Medium 0.5 sec 40 mm를 선택하여 시행하였다. 영상시험은 국립암센터 CT영상실에서 기본적으로 시행하고 있는 프로토콜에 MAR 옵션을 적용하여 동일하게 시행하였다. 영상분석은 MAR기법을 적용한 영상과 적용하지 않은 영상에서 검은색 인공물과 줄무늬 인공물이 있는 부위에 관심부위 (ROI)를 설정한 후 hounsfield unit(HU)과 노이즈를 이용한 정량적 평가를 하였고 임상 경험이 풍부한 의사와 방사선사가 CT영상에 대한 평가를 하여 MAR 알고리즘에 대한 유용성을 비교하였다. 환자 대상 시험 결과 MAR 알고리즘을 적용함으로서 금속 인공물이 있는 부위에서의 검은색 인공물(금속이 있는 부위) 과 줄무늬 인공물이 있는 영상에서 HU의 p값이 각각 p=0.01과 p=0.04를 보였지만 금속 인공물의 영향에서 벗어난 부위에서의 노이즈는 오히려 증가하는 모습을 보였다(p=0.05). 그리고 그 외의 영상(금속이 있는 부위에서 1 cm 떨어진 단면 영상) 에서 검은색 인공물과 줄무늬 인공물 부위의 HU와 노이즈의 p값에 대해서는 통계적 유의성은 만족하지 못하였지만 대체적으로 MAR알고리즘을 적용함으로서 금속인공물 발생이 감약 되는 결과를 보였다. 결론적으로 금속 물질이 삽입된 환자의 경우에 MAR 알고리즘을 적용함으로서 조직의 선예도가 적용하지 안했을 때보다 증가하였고 검은색 인공물 발생 또한 개선되는 모습을 보였다.

• Imaging Science in Dentistry
• /
• 제51권1호
• /
• pp.55-62
• /
• 2021

Purpose: This study evaluated the influence of a metal artifact reduction (MAR) tool in a cone-beam computed tomography (CBCT) device on the diagnosis of vertical root fractures (VRFs) in teeth with different root filling materials. Materials and Methods: Forty-five extracted human premolars were classified into three subgroups; 1) no filling; 2) gutta-percha; and 3) metallic post. CBCT images were acquired using an Orthopantomograph 300 unit with and without a MAR tool. Subsequently, the same teeth were fractured, and new CBCT scans were obtained with and without MAR. Two oral radiologists evaluated the images regarding the presence or absence of VRF. Receiver operating characteristic (ROC) curves and diagnostic tests were performed. Results: The overall area under the curve values were 0.695 for CBCT with MAR and 0.789 for CBCT without MAR. The MAR tool negatively influenced the overall diagnosis of VRFs in all tested subgroups, with lower accuracy (0.45-0.72), sensitivity (0.6-0.67), and specificity (0.23-0.8) than were found for the images without MAR. In the latter group, the accuracy, sensitivity, and specificity values were 0.68-0.77, 0.67-083, and 0.53-087, respectively. However, no significant difference was found between images with and without MAR for the no filling and gutta-percha subgroups (P>0.05). In the metallic post subgroup, CBCT showed a significant difference according to MAR use (P<0.05). Conclusion: The OP 300 MAR tool negatively influenced the detection of VRFs in teeth with no root canal filling, gutta-percha, or metallic posts. Teeth with metallic posts suffered the most from the negative impact of MAR.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 추계종합학술대회
• /
• pp.133-137
• /
• 2001

급속한 인터넷의 확산으로 인해 다양한 멀티미디어 응용 서비스들이 등장하였다 영상회의, 인터넷 방송, VOD등과 같은 실시간 인터넷 멀티미디어 서비스들은 고속의 데이터 전송과 QoS 그리고, 멀티캐스트를 요구한다. 인터넷의 하부구조인 ATM 망에서 IP 멀티캐스트를 지원하기 위한 방안으로 MARS가 제안되었으며, 또한 최선형 서비스 기반의 인터넷에서 서비스의 품질을 보장하기 위하여 자원예약 신호 프로토콜인 RSVP가 제안되었다. 본 논문에서는 단일 MCS기반의 MARS가 가지는 문제점들을 보완하기 위해 2개 이상의 MCS를 가지는 다중 MCS MARS기반의 ATM 망에서 클러스터 내의 ATM 호스트가 특정 IP 멀티캐스트 그룹에 가입할 경우 MARS가 종단간 전송지연을 최소화하는 MCS를 할당하여 송신자와 수신자간에 최소의 전송지연을 가지도록 하고, MARS가 Resv 메시지를 수신했을 때, 자원예약 메시지를 처리할 수 있도록 그 기능이 확장된 MARS는 유지하고 있는 MCS 관리 테이블을 참조하여 MCS를 재 선정함으로써 인터넷 서비스의 QoS를 유지하고, MARS와 MCS의 처리 부하를 줄일 수 있는 방안을 제시하고자 한다.

• 핵의학기술
• /
• 제28권1호
• /
• pp.35-40
• /
• 2024

Purpose: To improve the image quality in positron emission tomography (PET), the attenuation correction technique based on the computed tomography (CT) data is important process. However, the artifact is caused by metal material during PET/CT scan, and the image quality is degraded. Therefore, the purpose of this study was to evaluate image quality according to with and without iterative metal artifact reduction (iMAR) algorithm using customized 3D printing phantom. Materials and Methods: The Hoffman and Derenzo phantoms were designed. To protect the gamma ray transmission and express the metal portion, lead substance was located to the surface. The SiPM based PET/CT was used for acquisition of PET images according to application with and without iMAR algorithm. The quantitative methods were used by signal to noise ratio (SNR), coefficient of variation (COV), and contrast to noise ratio (CNR). Results and Discussion: The results shows that the image quality applying iMAR algorithm was higher 1.15, 1.19, and 1.11 times than image quality without iMAR algorithm for SNR, COV, and CNR. Conclusion: In conclusion, the iMAR algorithm was useful for improvement of image quality by reducing the metal artifact lesion.

• Imaging Science in Dentistry
• /
• 제50권1호
• /
• pp.23-30
• /
• 2020

Purpose: This study was conducted to assess the effectiveness of a metal artifact reduction (MAR) algorithm activated at different times during cone-beam computed tomography (CBCT) acquisition on the magnitude of artifacts generated by a zirconium implant. Materials and Methods: Volumes were obtained with and without a zirconium implant in a human mandible, using the OP300 Maxio unit. Three modes were tested: without MAR, with MAR activated after acquisition, and with MAR activated before acquisition. Artifacts were assessed in terms of the standard deviation (SD) of gray values and the contrast-to-noise ratio (CNR) in 6 regions of interest with different distances (10 to 35 mm, from the nearest to the farthest) and angulations(70° to 135°) from the implant region. Results: In the acquisitions without MAR, the regions closer to the implant(10 and 15mm) had a higher SD and lower CNR than the farther regions. When MAR was activated (before or after), SD values did not differ among the regions (P>0.05). The region closest to the implant presented a significantly lower CNR in the acquisitions without MAR than when MAR was activated after the acquisition; however, activating MAR before the acquisition did not yield significant differences from either of the other conditions. Conclusion: Both modes of MAR activation were effective in decreasing the magnitude of CBCT artifacts, especially when the effects of the artifacts were more noticeable.

• 한국안광학회지
• /
• 제17권1호
• /
• pp.53-58
• /
• 2012

목적: 최적구면굴절상태에서 진용한 시력표로 측정한 logMAR 시력에 의한 난시예상량을 파악해 보고, 투영식 소수시력표와 비교해 보고자 하였다. 방법: 대학생 150명 300안을 대상으로 logMAR 시력과 소수시력을 측정하여 완전교정 때의 난시량과 비교하였다. 결과: 진용한 시력표가 투영식 시력표에 비해 시표 줄 간의 차이가 0.25 D이상으로 비교적 구별이 뚜렷하였다. 또한 난시량과의 상관성은 logMAR 시력이 r = 0.8578로 소수시력 r = -0.7199 보다 높았다. 결론: 최적구면굴절상태에서 logMAR 시력을 통하여 난시량을 예측할 수 있었고, 투영식 시력표 보다 진용한 시력표가 단계별 난시예상량을 예측하는 것이 쉬운 것으로 판단된다.

• Imaging Science in Dentistry
• /
• 제51권1호
• /
• pp.1-7
• /
• 2021

Purpose: The aim of this study was to assess artifacts generated in cone-beam computed tomography (CBCT) of 3 types of dental implants using 3 metal artifact reduction (MAR) algorithm conditions (pre-acquisition MAR, post-acquisition MAR, and no MAR), and 2 peak kilovoltage (kVp) settings. Materials and Methods: Titanium-zirconium, titanium, and zirconium alloy implants were placed in a dry mandible. CBCT images were acquired using 84 and 90 kVp and at normal resolution for all 3 MAR conditions. The images were analyzed using ImageJ software (National Institutes of Health, Bethesda, MD) to calculate the intensity of artifacts for each combination of material and settings. A 3-factor analysis of variance model with up to 3-way interactions was used to determine whether there was a statistically significant difference in the mean intensity of artifacts associated with each factor. Results: The analysis of all 3 MAR conditions showed that using no MAR resulted in substantially more severe artifacts than either of the 2 MAR algorithms for the 3 implant materials; however, there were no significant differences between pre- and post-acquisition MAR. The 90 kVp setting generated less intense artifacts on average than the 84 kVp setting. The titanium-zirconium alloy generated significantly less intense artifacts than zirconium. Titanium generated artifacts at an intermediate level relative to the other 2 implant materials, but was not statistically significantly different from either. Conclusion: This in vitro study suggests that artifacts can be minimized by using a titanium-zirconium alloy at the 90 kVp setting, with either MAR setting.

• Plant Resources
• /
• 제6권1호
• /
• pp.11-15
• /
• 2003

To determine as optimal sowing time of forage rape in spring time in southern areas of Korea, forage rape cv. Velox, the highest yielding variety among introduced varieties of forage rape, was grown under five different sowing times. Yield components such as plant length, number of branches and number of leaves etc. were higher at the sowing time of Mar. 15 and Mar. 25. The plants sown at Mar. 15 and Mar. 25 also showed highest fresh and dry matter yield. When plants were grown under later sowing time, they showed higher values in content of crude protein and lower values in contents of crude fiber such as Neutral Detergent Fiber (NDF), Acid Detergent Fiber (ADF), cellulose and lignin. There was no relationship between variation of In Vitro Dry matter Digestibility (IVDMD) and sowing time. The plants sown at Mar. 15 and Mar. 25 showed highest digestible dry matter yields.