• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.549-554
• /
• 2008

The recent trains are almost being operated by the mechanical propulsion force to drive the gear and wheel with the traction motor. However Magnetic Levitation Vehicle is differently operated. Magnetic Levitation Vehicle is applied with Linear Induction Motor(LIM) that has many advantage like to high capability of going up to slope, low noise, easy to control of speed. So domestic and many advanced countries are interested in Magnetic Levitation Vehicle and they have been studying about it continuously. Thus this paper is studied the LIM test method of static states and guess the optimum driving point by characteristic of static states for LIM. The test items are measurement of thrust force by changed air gap, measurement of thrust force and normal force by changed slip frequency etc.

• 한국초전도ㆍ저온공학회논문지
• /
• 제9권1호
• /
• pp.76-81
• /
• 2007

This paper deals with the characteristics of a small scale $high-T_c$ superconducting(HTSC) levitation system. The levitation tester. which models after electrodynamic suspension(EDS) maglev, consists of one HTSC magnet, a reaction plate, and force measuring components. Instead of moving magnet, AC current was applied to the fixed HTSC magnet. The magnet also has persistent current switch(PCS). The inductance of the magnet was 18.5 mH and total joint resistance of the magnet was $5.74{\times}10^{-7}\Omega$. AC current was applied into the HTSC magnet with various frequencies and the levitation force was calculated and measured. According to the increase of the vehicle speed, the levitation force was saturated.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.31-38
• /
• 2008

본 연구는 도시형 자기부상열차 부상레일의 롤 성형공정 해석에 대한 연구로서 성형공정의 타당성을 검증하기 위하여 부상레일과 유사형상인 트랙슈에 대한 롤 성형공정을 해석하였다. 해석과정은 초기 육면체의 블록에서 시작하여 총 12공정으로 이루어졌으며, 이중 중복되는 공정을 제외한 8개 공정에 대하여 해석을 수행하였다. 공정별 온도의 변화는 초기 $1200^{\circ}C$에서 1공정에 투입되는 30초 동안 표면의 온도는 $1010^{\circ}C$까지 냉각 되며, 최종 공정인 12공정에서는 중심부에서 $980^{\circ}C$, 표면은 $900^{\circ}C$로 냉각되었다. 아울러 각 공정별 소재의 길이변화는 롤 성형전의 블록을 1로 했을 경우 각 공정별로 소재의 길이변화를 초기 길이로 나누어 비율로 계산한 결과 최종 공정후 초기에 비해 5배 증가하는 것을 알 수 있었다. 소재의 변형률은 상부롤의 형상부에서 크게 나타났으며, 최소 2.5에서 최대 6.5의 변형률을 나타내었다. 각 공정별 상 하부롤의 토크는 초기 2, 3, 4공정에서 높게 나타났으며, 최대 $27,000ton{\cdot}mm$를 보였으며, 수직방향으로의 하중은 최대 300톤이 필요한 것으로 해석되었다.

• 한국지진공학회논문집
• /
• 제17권6호
• /
• pp.257-269
• /
• 2013

In this study, the capability of an existing analysis method for the fluid-structure-soil interaction of an offshore wind turbine is expanded to account for the geometric nonlinearity and sea water drag force. The geometric stiffness is derived to take care of the large displacement due to the deformation of the tower structure and the rotation of the footing foundation utilizing linearized stability analysis theory. Linearizing the term in Morison's equation concerning the drag force, its effects are considered. The developed analysis method is applied to the earthquake response analysis of a 5 MW offshore wind turbine. Parameters which can influence dynamic behaviors of the system are identified and their significance are examined.

• Journal of Electrical Engineering and Technology
• /
• 제8권6호
• /
• pp.1451-1456
• /
• 2013

This paper presents the improved zero power levitation control algorithm for a quadruple hybrid EMS (Electromagnetic Suspension) system. Quadruple hybrid EMS system is a united form of four hybrid EMS systems one on each corner coupled with a metal plate. Technical issue in controlling a quadruple hybrid EMS system is the permanent magnet's equilibrium point deviation caused by design tolerance which eventually leads to a limited zero power levitation control that only satisfies the zero power levitation in one or two hybrid EMS system among the four hybrid EMS system. In order to satisfy a complete zero power levitation control of the quadruple hybrid EMS system, the proposed method presented in this paper adds a compensating algorithm which adjusts the gap reference of each individual axe. Later, this paper proves the stability and effectiveness of the proposed control algorithm via experiment and disturbance test.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 D
• /
• pp.2039-2040
• /
• 2006

Persistent current switch (PCS) system in NMR, MRI, MAGLEV and SMES has many advantages, such as uniformity and durability of magnetic field and reducing a thermal loss, which enable many superconducting application to operate effectively. This paper deals with fabrication and test of heater trigger persistent current switch using coated conductor (CC) which has high n-index, critical current independency from external magnetic field and adaptable selectivity of stabilizer. PCS system consists of magnet power supply for energizing current to a magnet, heater, switch and magnet using coated conductor tape. Finite element method (FEM) is used to simulate thermal quench (switching) characteristic and design heater trigger. With FEM simulation, optimal length of heater is calculated by temperature and time analysis. Fabrication of PCS system and test of heater trigger characteristic were performed and compared with simulation result. This paper would be the foundation of researches of superconducting switching application.

• 한국철도학회논문집
• /
• 제12권6호
• /
• pp.1076-1080
• /
• 2009

수명주기비용(Life Cycle Cost, LCC) 분석이란 분석 대상의 수명주기 전 기간에 걸친 총 원가산정을 통하여 해당 시스템을 평가하는 것이다. 철도시스템은 급전, 기계, 전기신호 등의 분야가 결합된 시스템으로 대규모 자본을 효율적으로 이용해야만 하는 문제를 안고 있다. 특히, 자기부상열차 시스템은 고도의 기술력이 필요하며 현재 국내에서 개발 단계에 있는 시스템으로, 비용 관련 연구가 더욱 필요한 실정이다. 따라서 국외의 철도시스템 및 자기부상열차 시스템에 대한 수명주기비용 연구 동향을 바탕으로 하여 국내의 자기부상열차 시스템에 적용할 수 있는 수명주기비용에 관한 모델을 제안하고자 한다.

• 한국지진공학회논문집
• /
• 제18권6호
• /
• pp.279-289
• /
• 2014

Considering a rigorously fluid-structure interaction, a method for an earthquake response analysis of a floating offshore structure subjected to vertical ground motion from a seaquake is developed. Mass, damping, stiffness, and hydrostatic stiffness matrices of the floating offshore structure are obtained from a finite-element model. The sea water is assumed to be a compressible, nonviscous, ideal fluid. Hydrodynamic pressure, which is applied to the structure, from the sea water is assessed using its finite elements and transmitting boundary. Considering the fluid-structure interaction, added mass and force from the hydrodynamic pressure is obtained, which will be combined with the numerical model for the structure. Hydrodynamic pressure in a free field subjected to vertical ground motion and due to harmonic vibration of a floating massless rigid circular plate are calculated and compared with analytical solutions for verification. Using the developed method, the earthquake responses of a floating offshore structure subjected to a vertical ground motion from the seaquake is obtained. It is concluded that the earthquake responses of a floating offshore structure to vertical ground motion is severely influenced by the compressibility of sea water.

• 제어로봇시스템학회논문지
• /
• 제22권7호
• /
• pp.557-561
• /
• 2016

Recently, in the manufacturing process of flat panel displays, mass production methods of inline system has been emerged. In particular the next generation OLED display manufacturing process, horizontal inline evaporation process has been tried. It is important for the success of OLED inline evaporation process to develop a magnetic levitation transport system capable of transferring a carrier equipped with a mother glass with high accuracy without any physical contact along the rail under vacuum condition. In the case of existing wheel-based transfer system, it is not suitable for OLED evaporation process requiring high cleanliness. On the other hand, the magnetic levitation transport system has an advantage that it does not generate any dust and it is possible to achieve high-precision control because there are not non-linear factors such as friction force. In this paper, we introduce the high-precision magnetic levitation transport system, which is currently under development, for OLED evaporation process.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1669-1679
• /
• 2010

Related to the on-going "Train Control System Project of Pilot Line Construction for Urban MAGLEV Train", activities by each phase shall be conducted to achieve SIL4 level and obtain safety certification from the Independent Safety Assessment(ISA), based on the IEC standards((IEC 62278/62279 and IEC 62425) for the first time in Korea. This thesis describes the introduction of IEC standards, system assurance activities (such as plan, analysis, test, verification and validation) in compliance with requirements management and project life-cycle and relations with the safety assessment activities; and certification activities (such as document reviews and audits) through system RAMS activities, software quality assurance activities and safety assessment, for the purpose of achieving a successful safety certification at the time of completing the project as system assurance activities including software and safety certification activities in order to acquire the safety certification for train control system which does not exist at all in domestic cases. It is believed that overall system safety assurance activities in this project will contribute to develop more upgraded products of the domestic train control system on the quality and safety point of view, find overseas markets and establish a bridgehead in the future.