• Journal of Embryo Transfer
• /
• v.20 no.2
• /
• pp.105-112
• /
• 2005

The present study was conducted to examine some factors affecting in vitro development of oocytes from somatic cell nuclear transfer (SCNT) in Korean native goats. Recipient oocytes were surgically collected after superovulation by using CIDR and FSH, PMSG, hCG and estrous synchronization in Korean Native goats. For nuclear transfer, the fibroblasts from caprine ear cells and fetal fibroblasts were surgically harvested and were cultured in vitro until cell confluency in serum-starvation condition (TCM-199 + $0.5\%$ FBS) for 3 to 5 days. The zona pellucidae of matured oocytes were partially drilled by laser irradiation. A single somatic cell was individually transferred into each enucleated oocyte. The reconstructed oocytes were then electrically fused and activated. Activated NT embryos were cultured in mSOF medium supplemented with $0.8\%\;BSA\;6\~7\;day\;at\;39^{\circ}C,\;5\%\;CO_2,\;5\%\;O_2,\;90\%\;N_2$ in air. There were no significant difference in the number of embryos cleaved and 4-cell development between the fibroblast nuclei from mature ear cells and fetal cells, but the rate of 8-cell development was higher (P<0.05) in ear cells $(40.5\%)$ than in fetal cells $(55.5\%)$. However, the embryo development to morula or blastocyst was not significantly different between both the groups$(6.7\%\;vs\;16.0\%)$, respectively. The number of embryo cleaved $(79.0\%)$ were higher (P<0.05) in the oocytes activated with ionomycin+6-DMAP than in the oocytes activated electrically $(9.5\%)$. The development of fused embryos to morula or blastocyst was found $15.6\%$ in ionomycin+6-DMAP, but no morula or blastocysts were developed in electrical stimulation. The development rate of SCNT embryos to morula or blastocyst was love. (P<0.05) in SCNT embryos $(19.0\%\;vs\;0.0\%)$ than that in parthenotes $(66.1\%\;vs\;59.1\%)$. In the parthenotes, the cleavage rate and development to morula or blastocyst were significantly higher (P<0.05) as $86.8\%\;and\;50.0\%$ in ovulated oocytes than in follicular oocytes $(69.0\%\;vs\;23.6\%)$, respectively. These results suggest that some factors Including superovulation treatment, oocyte source, maturation of follicular oocytes, activation method and culture condition may affect in vitro developmental capability of embryos produced by somatic cell nuclear transfer in Korean Native goats, and the fusion rate be greatly low compared with other species.

• Food Science of Animal Resources
• /
• v.24 no.4
• /
• pp.329-334
• /
• 2004

The objective of this study was to determine the effect of herb and bio ceramic complex supplementation on growth performance and meat quality characteristics in finishing pigs. Seventy-two crossbred (Landrace ${\times}$ Yorkshire ${\times}$ Duroc) pigs (78.98kg average initial body weight) were used in a 45 days growth assay. Dietary treatments included 1) Control (basal diet). 2) HBC (Herb and bioceramic complex) 0.1 (basal diet + 0.1％ Herb and bioceramic complex) and 3) HBC 0.2 (basal diet +0.2％ Herb and bioceramic complex). For overall period, ADG (Average Daily weight Gain), ADFI (Average Daily feed Intake) and ADG/ADFI increased in Control with no significant difference (p>0.05). Backfat thickness was not significantly different among the treatments (p>0.05). The total cholesterol, HDL (High Density Lipoprotein) cholesterol, LDL (Low Density Lipoprotein) cholesterol, LDL + VLDL (Very Low Density Lipoprotein) cholesterol, Triglyceride and Atherogenic index concentrations of serum in pigs fed HBC 0.2 diet were lower than those of pigs fed Control and HBC 0.1 diets without significant difference (p>0.05). L$\^$*/-, a$\^$*/-, and b$\^$*/- values of M. longissimus dorsi muscle were not significantly different among the treatments (p>0.05). The pH of pigs fed HBC 0.2 diet was significantly lower than that of pigs fed Control and HBC 0.1 diets (p<0.05). In conclusion, growth performance, cholesterol concentration in serum and meat quality were not affected by supplemental herb and bioceramic complex.

• Journal of Fashion Business
• /
• v.6 no.1
• /
• pp.137-154
• /
• 2002

It's not easy to renew old brand of over 50 years history to the tastes of new consumer of our time. Most of national brands that has a history of some 20 years in Korea have strove for continuation and growth of brand to no avails, which can be taken as a good example of current situation. For instance, C company, one of the National brand of US which has a history of 51 years, has made its position secure as a fashion group and based itself on a sound foundation by establishing new marketing strategy and completing successful brand renewal in the process of strategic M&A with Italian company. Those successful marketing strategies are as follows. 1) they regarded both market and consumer oriented marketing activity as company's highest priority strategy and put great emphasis upon concentration on target market and reestablishment of brand image of business casual wear. 2) Setting up and operating planning team composed of merchandizer alone in Milano, they set the direction of plan on the basis of concentrated research on potential item in market according to thorough market research done by buying office in Korea, branch office in Hong Kong and buyer in US prior to blueprint planning for season. 3) Great emphasis was placed on business which focused on intensive presentation of basic key item for apparel career women who are main consumer group in the midium-low prices market in US and on supplementation of size and color. they named this line 'collectibles' and helped their customer develop their own clothes plan without worrying about the change of color and fabric by supporting same fabric and color throughout the year and enabled them to add variation easily by supplementing new trend item. 4) Company set black as a main color that lots of apparel career women find easy to care and to express their own image and presented them with pebble which belongs to navy and beige and added fashion color such as wine and brown etc as season goes by. They constructed basic line in order for their customers to coordinate purchased item with new one or to add them to present collection, and to achieve efficient sale by setting up strategy which allows this cross coordination and changing pattern occasionally. 5) Though basic jacket for 99$, short slim skirt for 49$ are products within midium-low prices range, in the material planning stage aiming at production of item that has both resonable function appealing to consumer and is fashionable, synthetic material had to be used as a main source due to price competitiveness. Despite this situation, considering comfortable sense of fit and refined drape of silhouette that has no sign of cheap material, whole collectible line was divided into two items, which contributed to reduction of cost. In case of material that is composed of triacetate and polyester in 70 to 30 ratio, was used up to 4 million yard, which allowed drastic curtailment of cost accompanied by concentration. In case of 'collectibles' line, using Korean material mainly, C company chose to have their product sewed in Southeast Asian countries where transportation is well developed and both productivity and quality verified by operating global production system which aiming at cutdown of cost through outsourcing production from the country where labor cost is low and getting finished product. Polarization between present consumers telling us that consumers with the mind of middle classes in the past no longer exists between consumers who seek after only fine article of highest quality and wise consumers who are sensible enough to judge bubble on correlation between price and quality. To cope with this change in new consumer mind, apparel makes changing their policy so as to produce item that has reasonable quality and falls within affordable price range anywhere in the world. and they're striving to get out of difficult situation by operating global marketing strategy which stresses separation of planning, production and sale and sensibility of fashion shared worldwide. The marketing strategy of C company can be exemplified as a successful one.

• Journal of Life Science
• /
• v.27 no.2
• /
• pp.202-210
• /
• 2017

As an effort to find a potential biopreservative, we isolated bacterial strains producing bacteriocin from fermented foods. A strain was finally selected and characteristics of the bacteriocin were investigated. The selected strain was identified as Bacillus subtilis E9-1 based on the 16S rRNA gene analysis. The culture supernatant of B. subtilis E9-1 showed antimicrobial activity against Gram-positive bacteria. Subtilisin A, ${\alpha}$-chymotrypsin, trypsin and proteinase K inactivated the antimicrobial activity, which means its proteinaceous nature, a bacteriocin. The bacteriocin activity was fully retained at the pH range from 2.0 to 8.0 and stable at up to $100^{\circ}C$ for 60 min. Solvents such as ethanol, isopropanol and methanol had no effect on the antimicrobial activity at the concentration of 100% but acetone and acetonitrile reduced the activity at up to 100% concentration. Cell growth of four indicator strains was dramatically decreased in dose-dependent manner. Listeria monocytogenes was the most sensitive, but Enterococcus faecium was the most resistant. Bacillus cereus and Staphylococcus aureus showed the medium sensitivity. The bacteriocin showed its antimicrobial activity against B. cereus and L. monocytogenes via bactericidal action. The number of viable cells of L. monocytogenes started to reduce after addition of bacteriocin to the minced beef. The bacteriocin was purified through acetone concentration, gel filtration chromatography and RP-HPLC. The whole purification step led to a 6.82 fold increase in the specific activity and 6% yield of bacteriocin activity. The molecular weight of the purified bacteriocin was determined to be 3.3 kDa by MALDI-TOF/TOF mass spectrometry.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.14 no.4
• /
• pp.239-252
• /
• 1981

The East China Sea is an important region as nursery and spawning grounds for pelagic fishes such as jack mackerel, common mackerel etc. , and thus constitutes a major fishing area for purse-seine fishery. The environment surrounding in this region is under the influence of the Yellow Sea Cold Water, China Coastal Water and Kuroshio Current. The purpose of this study was to clarify the effects of oceanographic conditions and thermal fronts on the formation of the fishing grounds for the mackerels in the East China Sea. Through the analyses of fisheries statistics during 1968-1976 and temperature data, the following facts are found: 1) Approximately $70\%$ of the total mackerel(common) catches appeared to be come from the Tsushima Current region which includes Sakai coast of the Japan Sea, eastern Tsushima and Shirase Island, and Jeju Island of Korea. This area covers only about $8\%$ of the East China Sea. 2) Main fishing grounds for the jack mackerel are also centered around the area of southwestern Goto, Shirase and eastern Tsushima Island where the catches accounted for about $54\%$ of the total jack mackerel catches. 3) Fluctuations in annual catches are relatively small in the Tsushima Current region, compared to other regions such as Yellow Sea, southwestern coast of Kyushu and mid-western part of the East China Sea, where the fisheries yields varied considerably due to unstable fishing conditions. 4) It appears that the fishing grounds for the jack mackerel are mainly distributed along the warmer region ($15-20^{\circ}C$) of the thermal front, and those for the common mackerel are in somewhat colder region ($13-16^{\circ}C$) in the Tsushima Current.

• Journal of the Korean Geographical Society
• /
• v.31 no.4
• /
• pp.662-671
• /
• 1996

Since the world's economic and political structures have changed, the term 'globlization' has shown up as a dominant power and as a necessity for regional and national development. Each nation is responding to the globalization process economically and politically in various ways. In general, however, the economic response to the globalization is economic restructuring from the Fordist industries to 'flexible specialization'. And the political response to the globalization is 'global localization' as a new type of local politics(i.e., local policy activism or growth-enhancing local development policies). The crisis of Fordism shifted the role of local governments towards more involovement with local economic development. Local governments are mobilizing for loca economic development, they are taken into a process of institutional change that tends to redefine their responsibilities inside the state. Local governments thus tend to act as an entrepreneur in order to restructure theiir local economies and to compete with other national and international regions. State restructuring towards enerepreneurialism and efficient regional policy pursuing a pro-growth coalition trategy is chosen as a new mode of regulation for the post-Fordism at the local level. The flexible specialization as the post-Fordist economy and the local government as an entrepreneur are the global choice for globalization and a post-Fordist society. The paper focuses on the regulation theory which comprises the political economic perspective on resturcturing. Economic restructuring and state restructuring will be discussed in detail. And the paper tries to combine the economic globalization and the global localization as economic and political responses to globalization.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.1
• /
• pp.1-12
• /
• 2007

The purpose of this study was to evaluate the effect that various concentration and application time of hydrogen peroxide had on tooth whitening and physical properties. The hydroxyapatite (HA) discs of $12mm({\Phi}){\times}1.2mm(t)$ in dimensions were made by compression $(100kg/cm^2)$ and sintering (at $1350^{\circ}C$ for 2 hours) All specimens were polished sequentially with '240 through '2000 emery paper and one side of each specimen was polished finally with $0.3{\mu}m$ alumina paste. The discs were placed in sterile whole stimulated saliva overnight at $37^{\circ}C$ in order to form an in vitro pellicle layer. Then the discs were rinsed with distilled water and soaked into staining broth at $37^{\circ}C$ for 7 days. These stained specimens were bleached with hydrogen peroxide according to the change of concentration $(3{\sim}30%)$ and application time ($3{\sim}10$ days). The specimens were analyzed with a spectrophotometer, X-ray diffractometer (XRD), scanning electron microscope (SEM), surface roughness tester, microhardness tester and biaxial flexural strength. The results of present study can be summarized as follows : 1. The bleaching effect was increased with the increased concentration and the extended application time of hydrogen peroxide. 2. The surface roughness was significantly increased from the specimen bleached with 15% hydrogen peroxide for 10 days and with 30% for 7 and 10 days respectively (p<0.05). 3. The changes of crystal phase observed by XRD between before and after bleaching weren't shown of any difference, but microporous structure of surface observed by SEM was shown of increase with the increased concentration and the extended application. 4. The biaxial flexural strength was significantly decreased from bleaching of specimen with 30% hydrogen peroxide for 7 and 10 days respectively (p<0.05) 5. Microhardness was significantly decreased from bleaching with 15% hydrogen peroxide for 10 days and with 30% for 3, 7 and 10 days respectively (p<0.05). Although the tooth bleaching effect was greater when the high concentration was applied, further in vivo experiment will be needed to prove it's safety.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.1
• /
• pp.62-72
• /
• 2007

The purpose of present study was to determine whether different kinds of curing lights can alter microtensile bond strength(MTBS) of class I cavity pulpal and axial wall specimens in primary molar. Thirty clean mandibular 2nd primary molar's occlusal enamel were removed and class I cavity, size of $2{\times}4{\times}2mm$ was prepared. Dentin bonding agent was applied according to manufacturer's manual. Each group was cured with Halogen Curing Unit, Plasma Curing Unit and LED Curing Unit. Composite resin was bulk filled and photo cured with same curing unit. MTBS specimens which size is $0.7{\times}0.7{\times}4mm$ were prepared with low speed saw. Specimens were coded by their curing lights and wall positions (Halogen - Axial wall group, Halogen - Pulpal wall group, Plasma - Axial wall group, Plasma - Pulpal wall group, LED - Axial wall group, LED - Pulpal walt group). MTBS were tested at 1 mm/min cross Head speed by Universal Testing Machine. Fractured surface and bonding surface was observed with SEM. T-test between axial and pulpal specimens in each curing lights, one-way ANOVA among different curing light specimens in each wall positions were done. Weibull distribution analysis was done. The results were as follows : Mean MTBS of pulpal wall specimens were significantly greater than that of axial wall specimens at each curing units(p<.05). There was no significant difference in the MTBS among three curing units at axial wall and pulpal wall. In Weibull distribution, pulpal wall specimens were more homogeneous than axial wall specimens.

• Journal of Radiation Protection and Research
• /
• v.39 no.4
• /
• pp.199-205
• /
• 2014

In the field of neutron detections, $^3He$ gas, the so-called "the gold standard," is the most widely used material for neutron detections because of its high efficiency in neutron capturing. However, from variable causes since early 2009, $^3He$ is being depleted, which has maintained an upward pressure on its cost. For this reason, the demands for $^3He$ replacements are rising sharply. Research into neutron converting materials, which has not been used well due to a neutron detection efficiency lower than the efficiency of $^3He$, although it can be chosen for use in a neutron detector, has been highlighted again. $^{10}B$, which is one of the $^3He$ replacements, such as $BF_3$, $^6Li$, $^{10}B$, $Gd_2O_2S$, is being researched by various detector development groups owing to a number of advantages such as easy gamma-ray discrimination, non-toxicity, low cost, etc. One of the possible techniques for the detection is an indirect neutron detection method measuring secondary radiation generated by interactions between neutrons and $^{10}B$. Because of the mean free path of alpha particle from interactions that are very short in a solid material, the thickness of $^{10}B$ should be thin. Therefore, to increase the neutron detection efficiency, it is important to make a $^{10}B$ thin film. In this study, we fabricated a $^{10}B$ thin film that is about 60 um in thickness for neutron detection using well-known technology for the manufacturing of a thin electrode for use in lithium ion batteries. In addition, by performing simple physical tests on the conductivity, dispersion, adhesion, and flexibility, we confirmed that the physical characteristics of the fabricated $^{10}B$ thin film are good. Using the fabricated $^{10}B$ thin film, we made a proportional counter for neutron monitoring and measured the neutron pulse height spectrum at a neutron facility at KAERI. Furthermore, we calculated using the Monte Carlo simulation the change of neutron detection efficiency according to the number of thin film layers. In conclusion, we suggest a fabrication method of a $^{10}B$ thin film using the technology used in making a thin electrode of lithium ion batteries and made the $^{10}B$ thin film for neutron detection using suggested method.

• Tuberculosis and Respiratory Diseases
• /
• v.46 no.1
• /
• pp.44-52
• /
• 1999

Background : Airway infiltration by inflammatory cells, particularly of eosinophils, is one of the characteristic features of asthma. Several mechanisms for the recruitment of eosinophil is focused on the CD4+ T lymphocyte for the preferential production of Th2-c1erived cytokines. Interleukin-10(IL-10) is identified cytokine with potent antiinflammatory activity. This molecule has been shown to inhibit the release of cytokine from inflammatory cells including Th2 cell, and also to inhibit eosinophil survival. We therefore attempted to determine whether decreased synthesis of IL-10 in the lung of bronchial asthma may contribute to inflammation that is characteristics of this dease. Method: Subjects were patients with bronchial asthma(n=23) and normal controls(n=11). IL-10 produced from peripheral mononuclear cell(PBMC) and in bronchoalveolar lavage(BAL) fluid was measured by ELISA method. Degree of bronchial inflammation was assessed by total cell counts and eosinophil percents in BAL fluid, eosinophil infiltration on bronchial biopsy tissue and $PC_{20}$ for methacholine. Results: The IL-10 level produced by PBMC and in BAL fluid from patient with bronchial asthma were not different with normal controls(respectively, $901.6\pm220.4$ pg/ml, $810.9\pm290.8$ pg/ml for PBMC, $24.5\pm9.5$ pg/mL $30.5\pm13.5$ pg/ml for BAL fluid p>0.05). There were significant negative correlation between IL-10 in BAL fluid and eosinophil percents in BAL fluid or degree of eosinophil infiltration in bronchial biopsy (respectively r=-0.522, r=-0.4486 p<0.05). However there was no difference of IL-10 level according to $PC_{20}$ for methacholine. There were no correlation between IL-10 production by PBMC and peripheral blood eosinophil counts or serum eosinophilic cationic protein levels(respectively r=0.1146, r=0.0769 p>0.05). Conclusion: These observation suggest that IL-10 may participate but not acts the crucial role in regulation of the airway inflammation in bronchial asthma.