• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2000.04a
• /
• pp.9-10
• /
• 2000

An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

• Journal of Animal Science and Technology
• /
• v.49 no.6
• /
• pp.871-880
• /
• 2007

This study was conducted to investigate the relationship between the socio-demographic factors and the Korean consumers’ palatability evaluation and to collect the sensory information for development of prediction palatability model of Hanwoo beef. Ten cuts〔Abjin (short plate), Bosup (top sirloin), Cheggt (striploin), Dngsim (loin), Guri (chuck tender), Hongduke (eye of round), Moksim (chuck roll), Sulgit (bottom round), Udoon (top round), Yangi (brisket)〕 were separated from 10 Hanwoo bulls beef(～24 months old) and prepared with the same manner for 3 different cooking methods such as boiling, grilling and roasting. The cooked beef samples were served to 650 consumers recruited from Seoul, Joongbu, Honam and Youngnam locations and evaluated tenderness, juiciness, flavor and overall acceptability. The living location, age, gender, occupation, eating habit and cut were significantly related with the sensory properties when bull beef were cooked as boiled cooking(p<0.05). In grill cooking, only occupation, income and cut had the significant effect on the overall acceptability of Hanwoo bull beef(p<0.01). When bull beef were cooked as Korean traditional roast cooking, consumer’s sensory properties were significantly different by the living location, age, occupation, income, eating habit of consumers and cut(p<0.05). Also, results from the principal component analysis showed that palatability scores of Korean consumers were decided with different contribution scores of tenderness, juiciness, flavor and overall acceptability of cut depending on cooking methods. In conclusion, Korean consumers’ palatability for Hanwoo bull beef were related with the socio-demographic factors and the sensory results were different by cut and cooking methods.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.65 no.1
• /
• pp.30-39
• /
• 2020

A new silicate coating technology was developed which reduces the impact of dust and loosening during seeding compared to existing silicate-coatings (Seed/Si/Zeolite), and therefore can lower the production costs of rice cultivation. In this method, 100 g of rice seed is coated with 18 mL of liquid silicic acid and then dressed with a mixture containing 80 g of dolomite and 5 g of iron. To determine the most effective method of application and ensure that seedlings developed healthily, a series of experiments were carried out. Infected seeds scattered in seedling boxes and pots (soil and hydroponic) were coated dry, without disinfection. In comparison to the seed which were not treated with the silicate-coating, the new seed (A) were 1.84 times heavier in weight, and were also improved in terms of coating strength and coating color. Compared to the seedlings grown from the non-coated seed, those grown from the new silicate-coated seed were of significantly higher quality (weight/length) and had erect, dark greenish leaves, which are ideal plant characteristics. This was most likely due to increased silicate uptake. The symptoms of bakanae disease in the non-coated seed peaked after 38 days to 54.2%, whereas the control value was 68.8% in the new silicate-coated seed (A). In the infected seedlings grown from the new silicate-coated rice seed, subnormal macro-conidia, namely, a sickle shape spore without a septum; a straight oblong shape spore without a septum and with a thick cell wall; and inter-septal necrosis of a normal spore were detected. It is believed that the strong alkalinity of silicic acid have acted as unfavorable conditions for pathogenicity. In seedlings grown from the new silicate coated rice seed under hydroponic conditions without nutrients, normal root activity and growth was maintained without leaf senescence. Therefore, it was possible to reduce the rate of fertilization. In the future, a new silicate-coated rice seed was required for the study of minimal nutrition for anti-aging of seedlings.

• Korean journal of applied entomology
• /
• v.20 no.3 s.48
• /
• pp.135-145
• /
• 1981

Vegetables including Chinese cabbage and radish have been grown in alpine areas such as Muju, Namweon, Jinan and Jangsu during the shortage period of vegetables. The incidence of various diseases, environmental factors such as temperatures and rainfalls, and aphid populations as virus vector were observed at 10-day intervals from July to September in those areas. Disease incidence showed no significant difference among locations. Major diseases in Chin ese cabbage were bacterial soft rot, white spot, downy mildew, mosaic virus, Alternaria leaf spot and Fusarium seedling blight. Major diseases in radish were virus, white rust, black rot, root rot, leaf spot and Fusarium seedling blight. Disease incidence reached peak on Aug. 20 with $27\%$ infection in radish and with $20\%$ infection in Chinese cabbage during the growing season, and declined thereafter. Percentage of infection in each growth stage showed $25\%$ at root thickening stage and $26\%$ at the harvest time in radish; and the head formation stage, $24\%$ at the harvest time. The data indicate that disease incidence in radish increased rapidly at late growing stage and progressively increased in Chinese cabbage Seedling blight caused by Fusarium sp. and root rot caused by Aphanomyces sp. were also observed in those areas. Cool and wet weather appeared to be favorable for disease incidences during the rainy period of growing season although average temperature was about $25^{\circ}C$. Populations of aphids were lower in the alpine vegetable growing area than that of flat areas. Aphids as virus vectors from total aphids collected were $73.5\%$ or 289 virus vectors /993 total aphids in Namweon and $18.1\%$ or 31 virus vectors/171 total aphids in Muju. The most prerevalent species of aphids was Myzus persicae Sulz.

• The Korean Journal of Physiology
• /
• v.7 no.1
• /
• pp.23-31
• /
• 1973

Numerous factors concern with the absorption of substances through the membrane of the gastrointestinal tract. To simplify the experimental condition, present work has been restricted to observe the disappearance rate of substance from the intestinal loop which was made in the jejunum, 70 cm apart from the pylorus of the adult rabbit. The purpose of the study is to clarify the absorption of urea through the jejunal wall is solely attributable to the concentration difference between the luminal fluid and plasma, and to observe the effect of adding red pepper upon the rate of absorption. The rabbits were anesthetized with nembutal, 35mg/kg I.V. Jejunal loop was made by ligating at 2 spots, 70 cm and 80cm apart from the pylorus. After rinsing with normal saline solution through the polyethylene tubing inserted from the end of the loop, 8 ml of test solution was placed through the same tubing. The test solution contained 200 mg% of urea and 150mg% of polyethylene glycol(M.W. 4,000) in normal saline solution. Right after placing the test solution the first specimen was taken through the tubing, and successive samplings were performed at 5, 10, 20, and 30 minutes. Logarithm of the difference of urea concentration between the luminal fluid and plasma was plotted against time elapsed after the onset of the experiment. If straight line is revealed, it would verify the nature of transport mechanism as diffusion, obeying the Fick's principle. The concentration of polyethylene glycol (PEG) was also measured in order to examine the change in the volume. PEG was used as the marker substance because it is not absorbable in the intestinal tract. Consequently the concentration of PEG relates inversely to the volume of the loop. Instantaneous concentration of urea in the loop times the volume will give the amount of urea remaining in the luminal fluid. The change in the amount of any substance is directly relate to the volume of the compartment and differs from the change in the concentration which is independent of the volume. After completion of the experiment without red pepper, it was added in the test solution and was centrifuged after thorough mixing. Supernatant of the mixture was placed in the loop and similar sampling were performed with the same time intervals that of previous run in order to observe the effects of the red pepper on the passive transport of the water soluble small substance, urea. The results obtained were as follows: 1. Logarithm of the concentration difference of urea between the luminal fluid and plasma was diminished exponentially as time elapsed. The decay constant in the experiment without red pepper was 0.0563/min. By adding red pepper in the test solution as much as the concentration rose to 4,000 mg% and 8,000 mg%, the decay constants were lowered to 0.0493/min and to 0.0506/min, respectively. The time interval by which the concentration difference dropped to one half of the initial value was prolonged. Without red pepper the half concentration time was 13.30 minutes, and by adding extract of red pepper, 15.31 minutes and 15.71 minutes were revealed. 2. The profile of the diminishing rate of tile amount of urea was quite different from that of the concentration because of the change in the volume of the loop during the observed period. 3. By adding the extract of red pepper, it slowed down the rate of absorption of urea in the intestinal loop, suggesting an increase in the diffusional barrier. 4. Larger dosage of red pepper brought an increase in the secretion of intestinal fluid with concomitant expansion of the luminal volume, and the retardation of the absorption of urea was noticed. This effect was largely dependent on the sensitivity of the individual animal to the red pepper, extract. The amount of urea remained after 10 minutes interval was 55.5% of the initial amount in the experiment without red pepper. On the other hand it was not consistent after administration of red pepper, showing 50.6% and 66.5% of the initial figures by adding 400 mg and 800 mg of red pepper in the test solution, respectively. It was postulated that symptom of diarrhea often encountered by taking a hot (red pepper) food might be attributable to the increase of secretion and the retardation of absorption in the intestinal tract.

• Journal of Animal Science and Technology
• /
• v.46 no.5
• /
• pp.743-752
• /
• 2004

This experiment was conducted to investigate the effect of filtered water with silicate minerals on growth performance and pork quality. A total of 64 pigs were allotted at 37.95 kg body weight to 4 treatments in a randomized complete block(RCB) design. Each treatment had 4 replicates and treatments were I) Con(basaI diet). 2) Si-I(consumed silicate mineral filtered water and silicate mineral additive during 4 weeks before market weight), 3) Si-Il( consumed silicate mineral filtered water and silicate mineral additive during 8 weeks before market weight) and 4) Si-I1I(consumed silicate mineral filtered water and silicate mineral additive during 12 weeks before market weight). Silicate complex was added at 0.8% to basal diet. All pigs were allowed to feed and water ad libitum for 12 weeks. During last 4 weeks, average daily gain(ADG) in Si-Il and Si-III group was higher than that in Si-I group(P < 0.05). However overall experimental period, there were no significant differences in growth performance among all treatments. Acceptability of cooked pork at 7th day after slaughter in Si-lII group was higher than that in Con group(P < 0.05). The value of pH of fresh pork at 6 hours after slaughter was lower in Si-I1I group than that in Con group(P < 0.05). TBA values of fresh pork at 14th day after slaughter were lower in Si-II and Si-III groups than Con group(P < 0.05). These results demonstrated that pork quality could be improved when pigs consumed both silicate mineral and silicate mineral filtered water. However, growth performance was not improved by the consumption of silicate mineral filtered water and silicate mineral.

• Journal of radiological science and technology
• /
• v.29 no.2
• /
• pp.57-62
• /
• 2006

Purpose : This study was to understand about the measurement of shoulder motion fraction and motion ratio. We proposed the radiological criterior of glenohumeral and scapulothoracic movement ratio. Materials and Methods : We measured the motion fraction of the glenohumeral and scapulothoracic movement using CR(computed radiological system) of arm elevation at neutral, 90 degree, full elevation. Central ray was $15^{\circ},\;19^{\circ},\;22^{\circ}$ to the cephald for the parallel scapular spine, and the tilting of torso was external oblique $40^{\circ},\;36^{\circ},\;22^{\circ}$ for perpendicular to glenohumeral surface. Healthful donor of 100 was divided 5 groups by age(20, 30, 40, 50, 60). The angle of glenohumeral motion and scapulothoracic motion could be taken from gross arm angle and radiological arm angle. We acquired 3 images at neutral, $90^{\circ}$ and full elevation position and measured radiographic angle of glenoheumeral, scapulothoracic movement respectively. Results : While the arm elevation was $90^{\circ}$, the shoulder motion fraction was 1.22(M), 1.70(W) in right arm and 1.31, 1.54 in left. In full elevation, Right arm fraction was 1.63, 1.84, and left was 1.57, 1.32. In right dominant arm(78%), $90^{\circ} and Full motion fraction was 1.58, 1.43, in left(22%) 1.82, 1.94. In generation 20, $90^{\circ} and Full motion fraction was 1.56, 1.52, 30' was 1.82, 1.43, 40' was 1.23, 1.16, 50' was 1.80, 1.28, 60' was 1.24, 1.75. There was not significantly by gender, dominant arm and age. Conclusion : The criterior of motion fraction was useful reference for clinical dignosis the shoulder instability.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.20 no.1
• /
• pp.35-47
• /
• 2018

A edible mushroom, Clitocybe maxima (Lentinus giganteusis) commercially cultivated in China and Taiwan. However, the researches of cultivation and cultural characteristics were not reported in Korea. In this study, we conducted on cultural characteristics and artificial cultivation of C. maxima. Six isolates were collected from China(3 isolates, commercial strain), Taiwan(1 isolate, commercial strain) and Korea(2 isolates, wild type). C. maxima and L. giganteus collected in China and Taiwan, respectively, are the same in China and are estimated to be of the same species as cultured characteristics. The mycelial growth of the collected strains was not significantly different in agar medium but it showed the best growth in YPMG in liquid culture. Optimum temperature for mycelial growth and induction of fruit body were 25℃ and 30℃, respectively. In order to artificial cultivation of C. maxima, cultural characteristics and artificial cultivation were carried out using agricultural by-products and forestry by-products materials. Mycelial growth was suitable in rice straw, cottonwood sawdust, corncob and rice seed medium, and it was selected as a cultivation medium. The suitable medium for artificial cultivation of C. maxima was selected to mixed medium 2(compounding ratio(v/v): 55% of hardwood sawdust, 5% of cottonseed pellets, 10% of cottonseed, 15% of beet pulp, 15% of swollen rice husks). It took about 30 days to be able to harvest, it was faster than oyster mushrooms. The cultivation period was about 30days. A isolate, CMA-002 was not initiation to fruit body primordiuma on the used cultivation substrate. Other 5 isolates were initiate and development to fruit body on the substrate used in this study. The strain CMA-003 was initiated to be fruiting body by 8~10 days after induction of fruiting body in all of the substrates. Isolate CMA-003 was generate to a bundle fruit body. Other isolates, however, were form fruit body individually. The CMA-003 strain was likely highly recommendable strains for farming. The optimum conditions for the induction and growth of C. maxima fruit body were 25~30℃, 8 hr illumination per day with white fluorescent lamp, 90~95% relative humidity, and 1,500 ppm of CO₂ concentration in a cultivation room.

• Journal of Animal Science and Technology
• /
• v.45 no.6
• /
• pp.1007-1018
• /
• 2003

This study was conducted to investigate the effect of feeding of garlic stalk silage on performance and carcass characteristics of Hanwoo steers. Feeding trial was conducted with 27 heads of Hanwoo steers and these animals were divided into two groups of control(rice straw) and garlic stalk silage. Animals consuming rice straw were fed concentrates and rice straw for 22 months from the 5 months of age and animals consuming garlic stalk silage were fed concentrates, rice straw and garlic stalk silage for 22 months from the 5 months of age. Animals fed rice straw and garlic stalk silage were fed 1.34 and 1.47, 1.69 and 1.74, 1.65 and 1.66% concentrates to body weight for the growing period, fattening period and finishing period, respectively. Animals fed rice straw and garlic stalk silage as roughage sources were fed 1.37 and 1.38, 0.65 and 0.63, 0.43 and 0.43% roughages to body weight for the growing period, fattening period and finishing period, respectively. Also, animals fed garlic stalk silage were offered 0.22 and 0.33% garlic stalk silage to body weight for the fattening and finishing period, respectively. Animals fed rice straw and garlic stalk silage as a roughage sources did not differ in average daily gain during the whole feeding periods. Animals of control group consumed less concentrates and roughage than those fed garlic stalk silage during the whole feeding periods. However, feed efficiency was not significantly different between both treatments. Beef yield including backfat thickness, eye muscle area and carcass weight was slightly lower in the animals fed garlic stalk silage than in the animals fed rice straw even though there were no differences between both treatments. However, beef quality including beef color, fat color, texture, maturity and marbling score was slightly higher in the garlic stalk silage-fed animals than in the animals fed rice straw although there were not statistically different between both treatments. Animals consuming garlic stalk silage was significantly(p<0.05) lower in shear value than those fed rice straw. Amino acid composition including essential amino acid and non-essential amino acid was not different between animals fed rice straw and garlic stalk silage. Eye muscle area of animals fed garlic stalk silage contained slightly higher oleic acid, less linoleic acid and arachidonic acid and more linolenic acid than that of animals fed rice straw only as a roughage sources. So eye muscle area of animals fed garlic stalk silage contained more mono-unsaturated fatty acid than that of animals fed rice straw and $\omega$6/$\omega$3 ratio was narrower in the animals fed garlic stalk silage than in the animals fed rice straw. Economic income was higher by 20% in the animals fed garlic stalk silage than in the animals fed rice straw. Therefore, It may be concluded that feeding of garlic stalk silage as a roughage sources to steers during the fattening period seems to improve meat quality, fatty acid composition and economic income.

• Korean Journal of Heritage: History & Science
• /
• v.37
• /
• pp.285-307
• /
• 2004

Synthesize and examine petrological characteristic and geochemical characteristic by weathering formation of rock and progress of weathering laying stress on stone cultural properties of Unjusa temple of Chonnam Hwasun county site in this research. Examine closely weathering element that influence mechanical, chemical, mineralogical and physical weathering of rocks that accomplish stone cultural properties and these do quantification, wish to utilize by a basic knowledge for conservation scientific research of stone cultural properties by these result. Enforced component analysis of rock and mineralogical survey about 18 samples (pyroclastic tuff; 7, ash tuff; 4, granite ; 4, granitic gneiss; 3) all to search petrological characteristic and geochemical characteristic by weathering of Unjusa temple precinct stone cultural properties and recorded deterioration degree about each stone cultural properties observing naked eye. Major rock that constitution Unjusa temple one great geological features has strike of N30-40W and dip of 10-20NE being pyroclastic tuff. This pyroclastic tuff is ranging very extensively laying center on Unjusa temple and stone cultural properties of precinct is modeled by this pyroclastic tuff. Stone cultural propertieses of present Unjusa temple precinct are accomplishing structural imbalance with serious crack, and because weathering of rock with serious biological pollution is gone fairly, rubble break away and weathering and deterioration phenomenon such as fall off of a particle of mineral are appearing extremely. Also, a piece of iron and cement mortar of stone cultural properties everywhere are forming precipitate of reddish brown and light gray being oxidized. About these stone cultural properties, most stone cultural propertieses show SD(severe damage) to MD(moderate damage) as result that record Deterioration degree. X-ray diffraction analysis result samples of each rock are consisted of mineral of quartz, orthoclase,plagioclase, calcite, magnetite etc. Quartz and feldspar alterated extremely in a microscopic analysis, and biotite that show crystalline form of anhedral shows state that become chloritization that is secondary weathering mineral being weathered. Also, see that show iron precipitate of reddish brown to crack zone of tuff everywhere preview rock that weathering is gone deep. Tuffs that accomplish stone cultural properties of study area is illustrated to field of Subalkaline and Peraluminous, $SiO_2$(wt.%) extent of samples pyroclastic tuff 70.08-73.69, ash tuff extent of 70.26-78.42 show. In calculate Chemical Index of Alteration(CIA) and Weathering Potential Index(WPI) about major elements extent of CIA pyroclastic tuff 55.05-60.75, ash tuff 52.10-58.70, granite 49.49-51.06 granitic gneiss shows value of 53.25-67.14 and these have high value gneiss and tuffs. WPI previews that is see as thing which is illustrated being approximated in 0 lines and 0 lines low samples of tuffs and gneiss is receiving esaily weathering process as appear in CIA. As clay mineral of smectite, zeolite that is secondary weathering produce of rock as result that pick powdering of rock and clothing material of stone cultural properties observed by scanning electron micrographs (SEM). And roots of lichen and spore of hyphae that is weathering element are observed together. This rock deep organism being coating to add mechanical weathering process of stone cultural properties do, and is assumed that change the clay mineral is gone fairly in stone cultural properties with these. As the weathering of rocks is under a serious condition, the damage by the natural environment such as rain, wind, trees and the ground is accelerated. As a counter-measure, the first necessary thing is to build the ground environment about protecting water invasion by making the drainage and checking the surrounding environment. The second thing are building hardening and extirpation process that strengthens the rock, dealing biologically by reducing lichens, and sticking crevice part restoration using synthetic resin. Moreover, it is assumed to be desirable to build the protection facility that can block wind, sunlight, and rain which are the cause of the weathering, and that goes well with the surrounding environment.