• Fire Science and Engineering
• /
• v.23 no.5
• /
• pp.143-152
• /
• 2009

The numerical analyses for each single simplified shaft with three type openings were carried out by using computational fluid dynamics model for the calculation of the pressure difference and the location of the neutral plane and the visualization of stack effect. As the height of shaft heighten, the pressure difference of stack effect is much deviated against the theoretical value. For the Type A models shorter than 30 m height of shaft and the Type B models longer than 30m, the simulation results for the location of the neutral plane are well agreed to the theoretical values with 5% less deviations just after the beginning of simulation (t = 10s). For the Type B models longer than 30m with multiple openings, therefore, it is possible to calculate the location of the neutral plane by using a CFD model. The phenomenon of the air flow of stack effect can be easily understood with the visualization of stack effect.

• Journal of Technologic Dentistry
• /
• v.42 no.3
• /
• pp.202-207
• /
• 2020

Purpose: This study is a comparative analysis of the strain according to deposition in a constant temperature water bath after manufacturing ultraviolet (UV)-cured artificial teeth. Methods: As a control group, 10 ready-made artificial teeth were selected as the first molar on the right side of the maxilla (RT group). Silicone was used as a duplicate of the artificial denture teeth. Experimental teeth were prepared in two groups using the prepared silicone mold. In the first experimental group, the UV-cured resin was injected into the negative silicone, followed by irradiation with a UV-curing machine for 5 minutes (5M group). In the second experimental group, the UV-cured resin was injected into the negative silicone, and then irradiated for 30 minutes using a UV-curing machine (30M group). The one-way ANOVA was performed, and post-test was analyzed by Tukey. Results: When immersed in a water bath for 15 days, it was found to be -0.3% in the RT group, -0.6% in the 5M group, and -0.7% in the 30M group. The results revealed -0.2% in the RT group, 0.2% in the 5M group, and -0.2% in the 30M group when they were in the bath for 30 days. Conclusion: In the water bath, the swelling was greater when deposited for 1 to 15 days, but was less when deposited for 15 to 30 days.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1A
• /
• pp.67-74
• /
• 2006

The use of steel plates has been greatly increased in bridge construction, particularly for long-span bridges. For connections of those steel plates in the field, application of high-tension bold, such as M30, is highly demanded. However, the current steel construction specifications in Korea do not provide information for large-sized bolt connections. In order to evaluate the applicability of the large-sized high-tension bolt, this study experimentally investigates relaxation and slip behavior of M30 bolts with varying bolt size and plate thickness. In addition, internal compressive stress was computed using FEM analysis. The analyzed results were compared with the stress distribution measured from strain gages attached on bolts and bolt holes. From the study presented herein, the M30 high-tension bolts are anticipated to be successfully used with the relaxation less than 10% and the slip coefficient satisfying the specified limit.

• The Korean Journal of Physiology and Pharmacology
• /
• v.7 no.3
• /
• pp.169-174
• /
• 2003

${\gamma}$-Aminobutyric acid (GABA) has been reported to enhance exocrine secretion evoked not only by secretagogues but also by intrinsic neuronal excitation in the pancreas. The pancreas contains cholinergic neurons abundantly that exert a stimulatory role in exocrine secretion. This study was undertaken to examine effects of GABA on an action of cholinergic neurons in exocrine secretion of the pancreas. Intrinsic neurons were excited by electrical field stimulation (EFS; 15 V, 2 msec, 8 Hz, 45 min) in the isolated, perfused rat pancreas. Tetrodotoxin or atropine was used to block neuronal or cholinergic action. Acetylcholine was infused to mimic cholinergic excitation. GABA $(30{\mu}M)$ and muscimol $(10{\mu}M)$, given intra-arterially, did not change spontaneous secretion but enhanced cholecystokinin (CCK; 10 pM)-induced secretions of fluid and amylase. GABA (3, 10, $30{\mu}M$) further elevated EFS-evoked secretions of fluid and amylase dose-dependently. GABA (10, 30, $100{\mu}M$) also further increased acetylcholine $(5{\mu}M)$-induced secretions of fluid and amylase in a dose-dependent manner. Bicuculline $(10{\mu}M)$ effectively blocked the enhancing effects of GABA $(30{\mu}M)$ on the pancreatic secretions evoked by either EFS or CCK. Both atropine $(2{\mu}M)$ and tetrodotoxin $(1{\mu}M)$ markedly reduced the GABA $(10{\mu}M)$-enhanced EFS- or CCK-induced pancreatic secretions. The results indicate that GABA enhances intrinsic cholinergic neuronal action on exocrine secretion via the $GABA_A$ receptors in the rat pancreas.

• Elastomers and Composites
• /
• v.35 no.1
• /
• pp.63-70
• /
• 2000

Zinc plated steel tire cords were subjected to RF plasma etching of argon, followed by plasma polymerization coating of acetylene or butadiene in order to enhance adhesion to rubber compounds. Plasma polymerization was carried out under optimized conditions of 10 W, 30 sec, 30 mTorr for acetylene and butadiene gas, while plasma etching was performed at 90W, 10min and 30mTorr. The adhesion of tire cords was evaluated via Tire Cords Adhesion Test (TCAT) and the failure surfaces of the tested samples were analyzed by SEM. Polymer coating by plasma polymerization was also characterized by FT-IR, Alpha-Step and dynamic contact angle analyzer in order to elucidate the adhesion mechanism.

• KSBB Journal
• /
• v.19 no.3
• /
• pp.215-220
• /
• 2004

A variety of solid bases such as inorganic bases, basic anion exchange resins, and resin-bound bases were tested as a catalyst for racemization of (S)-naproxen 2,2,2-trifluoroethyl thioester in isooctane at 45$^{\circ}C$. Among the various bases, DIAIOM WA30, which is a weakly basic anion exchange resin with a tertiary amine based on a highly porous type styrene-divinylbenzene copolymer, showed the highest catalytic activity. The second-order interconversion constant of DIAION WA30 was 8.6${\times}$10$\^$-4/ mM$\^$-1/h$\^$-1/ and about 3 times higher than that of trioctylamine under the same conditions. The rate of DIAION WA30-catalyzed racemization decreased with increasing an amount of water added to the reaction medium. Lipase-catalyzed kinetic resolution of racemic naproxen 2,2,2-trifluoroethyl thioester was successfully carried out under in situ racemization of substrate with DIAION WA30 in isooctane at 45$^{\circ}C$. More than 60% conversion and 99% enantiomeric excess for the desired (S)-naproxen product were obtained. Furthermore, such a solid base catalyst could be easily separated and reused in contrast to trioctylamine.

• Journal of Embryo Transfer
• /
• v.9 no.3
• /
• pp.235-241
• /
• 1994

The study was conducted to determine the optimal hormone and glucose levels during the in vitro culture of bovine oocytes matured and fertilized in vitro for blastocyst development. Oocytes matured in TCM 199 + 10% FCS + hormones and glucose were fertilized in vitro in a TALP medium with swim up separated and heparin-treated epididymal cauda spermatozoa. Oocytes were cultured for 2~5 days in synthetic oviduct fluid medium (SOFM) supplemented with 10% FGS and with different hormone and glucose levels, and further cultured 5 days same medium in SOFM. The results are summarized as follows : The in vitro maturation and penetration rates of porcine oocytes cultured in TCM 199 media containing PMSG, hCG, PMSG + hCG, hCG + $\beta$ estradiol, PMSG + $\beta$ estradiol 0 to20 hours after insemination were 88.0% and 81.8%, 82.6% and 68.4%, 80.0% and 75.0%, 80.0% and 65.0%, 77.3% and 64.7%, respectively. The in vitro maturation and penetration rates of porcine oocytes cultured in TCM 199 media containing PMSG, hCG, PMSG + hCG, hCG + $\beta$ estradiol, PMSG + $\beta$ estradiol 20 to 40 hours after insemination were 92.0% and 87.0%, 92.0% and 82.6%, 91.3% and 81.0%, 85.2% and 73.9%, 87.5% and 81.0%, respectively. The cleavage and in vitro developmental rates to blastocyst of porcine oocytes cultured in TCM 199 media containing 0.05 mM, 0.10 mM, 0.30 mM, 0.50 mM, 1.00 mM, and 3.00 mM glucose lelvels 0~3 days after insemination were 31.5~48.1% and 10.0~16.7%, respectively. The cleavage and in vitro developmental rates to blastocyst of porcine oocytes cultured in TCM 199 media containing 0.05 mM, 0.10 mM, 0.30 mM, 0.50 mM, 1.00 mM, and 3.00 mM glucose levels 4~8 days after insemination were 30.0~53.8% and 8.7~19.2%, respectively. The cleavage and in vitro developmental rates to blastocyst were higher in TCM 199 media containing various glucose levels 0~3 days after insemination than 4~8 days.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.18 no.2
• /
• pp.169-177
• /
• 2020

Here, the stability of stainless steel 316 (SS-316) was investigated to identify its applicability in the oxide reduction process, as a component in related equipment, to produce a complicated gas mixture composed of O₂ and Cl₂ under an argon (Ar) atmosphere. The effects of the mixed gas composition were investigated at flow rates of 30 mL/min O₂, 20 mL/min O₂ + 10 mL/min Cl₂, 10 mL/min O₂ + 20 mL/min Cl₂, and 30 mL/min Cl₂, each at 600℃, during a constant argon flow rate of 170 mL/min. It was found that the corrosion of SS-316 by the chlorine gas was suppressed by the presence of oxygen, while the reaction proceeded linearly with the reaction time regardless of gas composition. Surface observation results revealed an uneven surface with circular pits in the samples that were fed mixed gases. Thermodynamic calculations proposed the combination of Fe and Ni chlorination reactions as an explanation for this pit formation phenomenon. An exponential increase in the corrosion rate was observed with an increase in the reaction temperature in a range of 300 ~ 600℃ under a flow of 30 mL/min Cl₂ + 170 mL/min Ar.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.259-267
• /
• 2020

This study measured the Particulate Matter (PM) concentration according to altitude (30 m, 60 m, 90 m, 120 m, and 150 m) in three different environments: a construction site, natural environment (arboretum), and residential area. PM_2.5 and PM₁₀ values at 30 m above the construction site were 18.63 ㎍/㎥ and 24.23 ㎍/㎥ while values at 150 m were 10.89 ㎍/㎥ and 10.61 ㎍/㎥, respectively, indicating the average concentration decreased as altitude increased. PM_2.5 and PM₁₀ values at 30 m above the natural environment were 9.03 ㎍/㎥ and 11.21 ㎍/㎥ while those at 150 m were 3.42 ㎍/㎥ and 3.57 ㎍/㎥, respectively, showing lower average concentrations as altitude increased. PM_2.5 and PM₁₀ values at 30 m above the residential area were 10.65 ㎍/㎥ and 12.06 ㎍/㎥ while those at 150 m were 4.24 ㎍/㎥ and 5.17 ㎍/㎥, also demonstrating lower PM concentrations as altitude increased. The PM concentrations decreased as altitude increased at all tested sites and also decreased between environments in the following order: construction site, residential area, and natural environment. The results of this study are significant because PM concentrations were measured at various altitudes at different land-use sites. The results are expected to serve as basic data for decision-making in both regional and urban planning.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.2
• /
• pp.272-279
• /
• 2013

The fermented puer tea leaves were high concentrated extracted with 50% ethanolic solution in this study. Also, evaluating the anti-oxidative activity and anti-aging effect of this extract, we expected to apply the cosmetic industry. The yield of fermented puer tea extract was 17.9%. The total polyphenol content was 37.5%, tannin content was 7.5%, polysaccharide was 17.9%, unknown compound was 22%, and water content was 8%. Anti-oxidative activity (in-vitro) of fermented puer tea extract by DPPH method was $33.7{\pm}1.8%$ in 30mg/mL, $39.4{\pm}2.2%$ in 50mg/mL respectively. Therefore, we could know that anti-oxidative activity of fermented puer tea extract was effect higher than tocopheryl acetate and greentea extract. The collagen synthesis activity (in-vitro) of fermented puer tea extract was increased with $102.9{\pm}9.9%$ in 1 mg/mL, $111.5{\pm}9.9%$ in 5 mg/mL, $122.7{\pm}12.2%$ in 10 mg/mL, $131.5{\pm}13.7%$ in 30 mg/mL (*p-value£0.05, n=3). Skin moisturizing activity of fermented puer tea extract after application 8 hours was increased 38.5% higher than control samples both tocopheryl acetate and greentea extract. Total moisturizing effect was increased about 32.7% compared to before treatment. Fermented puer tea extract of this study can be applied to the skin care cosmetics industry.