• 제목/요약/키워드: M2M architecture

검색결과 1,827건 처리시간 0.029초

탄소섬유를 적용한 카누의 흘수에 따른 저항성능에 대한 수치적 연구 (A Numerical Study on Resistance Performance According to the Draft CFRP Composite Canoe)

  • 김주열;김준호;정재하;임종길;라인강;오정근
    • 해양환경안전학회지
    • /
    • 제22권7호
    • /
    • pp.876-883
    • /
    • 2016
  • 본 연구에서는 카누 선체 재료를 탄소섬유복합재료로 선정하였으며, 선형설계는 선박 설계 상용프로그램인 SOLIDWORKS를 이용하여 수행하였다. 카누의 유동해석은 상용프로그램인 STAR-CCM+를 이용하여 자유수면의 파형을 살펴보고 수치해석 결과를 통하여 저항성능을 확인하였다. 그 결과, 흘수가 0.09 m일 경우에 4 m/s 미만의 선속으로, 흘수가 0.24 m인 경우에는 2 m/s 미만으로 운항하면 안전하다고 판단되며, 두 명의 성인이 속도를 내는 데에도 무리가 없음을 확인하였다. 또한, 해석결과를 적용하고 CFRP를 이용하여, 기존의 재료보다 20 % 가볍게 제작된 카누에 대해서도 간략히 소개하였다.

스마트폰 기반 IoT 게이트웨이 수용을 위한 확장형 LWM2M 구조 (LWM2M Architecture extended to support IoT gateway based on smartphone)

  • 윤주상;이태진
    • 한국컴퓨터정보학회:학술대회논문집
    • /
    • 한국컴퓨터정보학회 2016년도 제53차 동계학술대회논문집 24권1호
    • /
    • pp.93-95
    • /
    • 2016
  • 본 논문에서는 사물인터넷 서비스 모델인 OMA LWM2M 구조에서 IoT 게이트웨이가 포함된 확장 모델을 제안한다. 추가적으로 제안된 모델은 스마트폰 기반으로 구현된 IoT 게이트웨이를 가정하여 확장된 모델이다. 본 논문에서 제안하는 확장형 LWM2M 모델은 스마트폰을 이용하여 LWM2M 기반에서 스마트폰의 다양한 자원 및 None-LWM2M 클라이언트 자원을 LWM2M 자원 객체로 활용하여 다양한 IoT 서비스를 효율적이고 경제적으로 제공하는데 활용될 수 있다.

  • PDF

A VLSI Architecture for Novel Decision Feedback Differential Phase Detection with an Accumulator

  • Kim, Chang-Kon;Chong, Jong-Wha
    • ETRI Journal
    • /
    • 제24권2호
    • /
    • pp.161-171
    • /
    • 2002
  • This paper proposes a novel decision feedback differential phase detection (DF-DPD) for M-ary DPSK. A conventional differential phase detection method for M-ary Differential Phase Shift Keying (DPSK) can simplify the receiver architecture. However, it possesses a poorer bit error rate (BER) performance than coherent detection because of the prior noisy phase sample. Multiple-symbol differential detection methods, such as maximum likelihood differential phase detection, Viterbi-DPD, and DF-DPD using L-1 previous detected symbols, have attempted to improve BER performance. As the detection length, L, increases, the BER performance of the DF-DPD improves but the complexity of the architecture increases dramatically. This paper proposes a simplified DF-DPD architecture replacing the conventional delay and additional architecture with an accumulator. The proposed architecture also improves BER performance by minimizing the current differential phase noise through the accumulation of previous differential phase noise samples. The simulation results show that the BER performance of the proposed architecture approaches that of a coherent detection with differential decoding.

  • PDF

Behaviour of soil-steel composite bridge with various cover depths under seismic excitation

  • Maleska, Tomasz;Beben, Damian
    • Steel and Composite Structures
    • /
    • 제42권6호
    • /
    • pp.747-764
    • /
    • 2022
  • The design codes and calculation methods related to soil-steel composite bridges and culverts only specify the minimum soil cover depth. This value is connected with the bridge span and shell height. In the case of static and dynamic loads (like passing vehicles), such approach seems to be quite reasonable. However, it is important to know how the soil cover depth affects the behaviour of soil-steel composite bridges under seismic excitation. This paper presents the results of a numerical study of soil-steel bridges with different soil cover depths (1.00, 2.00, 2.40, 3.00, 4.00, 5.00, 6.00 and 7.00 m) under seismic excitation. In addition, the same soil cover depths with different boundary conditions of the soil-steel bridge were analysed. The analysed bridge has two closed pipe-arches in its cross section. The load-carrying structure was constructed as two shells assembled from corrugated steel plate sheets, designed with a depth of 0.05 m, pitch of 0.15 m, and plate thickness of 0.003 m. The shell span is 4.40 m, and the shell height is 2.80 m. Numerical analysis was conducted using the DIANA programme based on the finite element method. A nonlinear model with El Centro records and the time history method was used to analyse the problem.

LPWA기반의 임산물 생육환경 수집 및 빅데이터 분석 시스템 개발 (Development of LPWA-Based Farming Environment Data Collection System and Big Data Analysis System)

  • 김유빈;오연재;김응곤
    • 한국전자통신학회논문지
    • /
    • 제15권4호
    • /
    • pp.695-702
    • /
    • 2020
  • 최근 스마트 팜의 연구가 활발해지면서 시설하우스와 같은 실내 환경 제어는 높은 수준에 이르렀다. 그러나 노지에서 재배가 이루어지는 임업 분야에 ICT기술의 활용은 아직 미비한 실정이다. 본 논문에서는 ICT 기술을 적용한 LPWA 기반의 임산물 생육환경 수집 및 빅데이터 분석 시스템을 제안한다. 제안된 시스템은 oneM2M 아키텍처를 기반으로 구성하였으며 소규모 태양광 발전과 LPWA기술을 이용하여 노지에서 환경 데이터를 수집하여 서버에 전송한다. 전송된 데이터는 서버에서 빅 데이터로 구축되며 이를 활용해 임산물의 생산량과 품질을 예측한다. 제안된 시스템은 신재생 에너지와 스마트 팜의 융합을 통해 저비용, 고품질의 임산물 생산에 기여할 것으로 기대된다. 또한 노지에서 이루어지는 농작물의 생장 환경 모니터링과 oneM2M 아키텍처를 활용하는 타 산업 분야에 응용될 수 있다.

여름철 공원 수림지 가장자리의 온열환경 기울기 변화 - 하동송림과 함양상림을 대상으로 - (The Gradient Variation of Thermal Environments on the Park Woodland Edge in Summer - A Study of Hadongsongrim and Hamyangsangrim -)

  • 류남형;이춘석
    • 한국조경학회지
    • /
    • 제43권6호
    • /
    • pp.73-85
    • /
    • 2015
  • 본 연구는 공원 수림지 경계로부터 내부로의 거리에 따른 수림지 가장자리의 온열환경에 대한 효과를 규명하고자 하였다. 이를 위해 전형적인 여름 날씨를 나타낸 2015년 7월 31일부터 8월 5일까지 6일간 소도읍에 소재하고 있는 장령림인 하동송림의 소나무 순림(수령: $100{\pm}33$년, 울폐도: 75%, 수고: $12.8{\pm}2.7m$, 지하고: $9.8{\pm}2.7m$, N $35^{\circ}03^{\prime}34.7^{{\prime}{\prime}}$, E $127^{\circ}44^{\prime}43.3^{{\prime}{\prime}}$, 표고 7~10m) 남측 가장자리와 함양상림의 졸참나무-개서어나무 군락(수령: 졸참나무 58~123년, 개서어나무 102~125년, 울폐도: 96%, 수고: 교목층 $18.6{\pm}2.3m$, 아교목층 $5.9{\pm}3.2m$, 관목층 $0.5{\pm}0.5m$, 지하고는 교목층 $11.0{\pm}3.2m$, 아교목층 $3.1{\pm}1.7m$, 관목층 $0.2{\pm}0.3m$, 초본층의 피도 60%, N $35^{\circ}31^{\prime}28.1^{{\prime}{\prime}}$, E $127^{\circ}43^{\prime}09.8^{{\prime}{\prime}}$, 표고 170~180m) 동측 가장자리의 경계로부터 내부로의 거리별 기온, 상대습도, 풍속, MRT나 UTCI를 측정 및 분석하였다. 그리고 비선형 시그모이드 함수를 적용하여 수림지 가장자리가 가지는 경계로부터의 거리에 따른 기온, 상대습도, 풍속, MRT, UTCI의 저감효과를 구명하였다. 깊이의 결과 값이 -를 나타내는 것은 수림지의 바깥을 의미한다. 1) 최고 기온, 최저 상대습도, 최고 기온시 풍속에 대한 수림지 가장자리 효과가 미치는 깊이는 상록침엽수림인 하동송림의 경우는 수림지의 경계로부터 각각 $12.7{\pm}4.9m$, $15.8{\pm}9.8m$ 그리고 $23.8{\pm}26.2m$였으며, 낙엽활엽수림인 함양상림의 경우는 수림지의 경계로부터 각각 $3.7{\pm}2.2m$, $4.9{\pm}4.4m$ 그리고 $2.6{\pm}7.8m$였다. 2) 이용자가 체감하는 더위에 직접적인 영향을 주는 인체가 흡수한 온열환경에 근거한 최고 MRT와 최고 UTCI(체감더위지수)에 대한 수림지 가장자리 효과가 미치는 깊이는 하동송림의 경우는 수림지의 경계로부터 각각 $7.1{\pm}1.7m$$4.3{\pm}4.6m$였으며, 함양상림의 경우는 수림지의 경계로부터 각각 $5.8{\pm}4.9m$$3.5{\pm}4.1m$였다. 3) 미기후 즉 온열환경 요소인 기온, 상대습도, 풍속 그리고 인체가 흡수한 온열환경에 근거한 주간(10:00~17:00) MRT와 UTCI에 대한 수림지 가장자리의 효과는 식생밀도가 상대적으로 높고, 하층식생이 발달한 함양상림이 식생밀도가 낮고, 하층식생의 거의 없는 하동송림에 비해 높게 나타났다. 따라서 체감 더위지수인 UTCI의 10분 평균값이 최댓값을 나타낸 시점을 기준으로 하면, 수림지 경계로부터 내부로의 거리가 하동송림의 경우는 $4.3{\pm}4.6m$, 함양상림의 경우는 $3.5{\pm}4.1m$에서 온열환경 기울기의 변화가 비교적 완만해지므로, 수림지 계획시 이용객의 온열환경을 고려한 완충대의 적정 폭은 하동송림의 경우는 4.3~8.9m, 함양상림의 경우는 3.5~7.6m이다. 또한 온열환경에 대한 완충효과를 극대화하기 위해서, 수림지 완충대 식생의 수직구조는 다층 구조의 수관과 닫힌 가장자리로 하여야 한다.

Studies on the Actual Vegetation and Vegetation Structure of the Tongdosa Temple Forest

  • Kang, Hyun-Mi;Lee, Sang-Cheol;Choi, Song-Hyun;Park, Seok-Gon
    • 한국환경생태학회지
    • /
    • 제29권1호
    • /
    • pp.46-61
    • /
    • 2015
  • The purpose of this study is to investigate a vegetation structure around Tongdosa temple forest and provincial park and to provide preliminary data. In order to look over the vegetation status, an actual vegetation map was drawn around study area. Vegetation structure survey was carried out for 6 representative communities of actual vegetation which were Quercus variavilis community, Carpinus tschonoskii community, Pinus densiflora community, P. densiflora-Broadleaf deciduous Forest community, Q. mongolica community and Broadleaf deciduous Forest community. The area of the Tongdosa district measured $29,202,262m^2$. Actual vegetation type were divided into 35 types, and the ratio of Q. variavilis community was 32.35 % ($9,447,932m^2$). To investigate the structure of 6 representative communities, 58 plots were set up and unit area plots measured $100m^2$. The estimated age of the forest is 50~100-years-old and the oldest tree P. densiflora is 113-years-old.

국내(國內) 인텔리전트 사무소(事務所) 건물(建物)의 건축계획(建築計劃) 관련지표(關聯指標) 추이(推移) 분석(分析) (An Analysis of the Transition of Architectural Data on the Intelligent Office Building in Korea)

  • 변계성
    • 한국디지털건축인테리어학회논문집
    • /
    • 제2권1호
    • /
    • pp.24-31
    • /
    • 2002
  • The purpose of this study was to analyze the transition on architectural data such as valid indoor length, module, ratio of core, floor height, ceiling height and the type of structured cabling system according to the intelligent building grade through case study of the intelligent office buildings constructed in Korea since 1980. The results of this study were as follows. The average floor height was 3.80m, and it was higher in proportion to the IB grade. The average ceiling height was 2.57m, and it didn't have connection with the IB grade. The module of high frequency in application was $3.0{\times}3.0m$, and it showed 25% in the application frequency. The average valid indoor length was 12.27m. The average ratio of core was 24.49%. The type of high frequency in application for the structured cabling was Access Floor Type, and it showed 31% in the application frequency.

  • PDF

GF($3^m$)상에서 모든 항의 계수가 존재하는 기약다항식의 승산기 설계 (Design of a Multiplier for Irreducible Polynomial that all Coefficient over GF($3^m$))

  • 이광희;황종학;박승용;김흥수
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2002년도 하계종합학술대회 논문집(5)
    • /
    • pp.79-82
    • /
    • 2002
  • In this paper, we proposed a multiplicative algorithm for two polynomials in existence coefficients over finite field GF(3$^{m}$ ). Using the proposed multiplicative algorithm, we constructed the multiplier of modular architecture with parallel in-output. The proposed multiplier is composed of (m+1)$^2$identical cells, each cell consists of single mod(3) additional gate and single mod(3) multiplicative gate. Proposed multiplier need single mod(3) multiplicative gate delay time and m mod(3) additional gate delay time not clock. Also, the proposed architecture is simple, regular and has the property of modularity, therefore well-suited for VLSI implementation.

  • PDF

GF(2m)상의 MSD 우선 알고리즘 기반 디지트-시리얼 곱셈기 (A Digit Serial Multiplier Over GF(2m)Based on the MSD-first Algorithm)

  • 김창훈;김순철
    • 정보처리학회논문지A
    • /
    • 제15A권3호
    • /
    • pp.161-166
    • /
    • 2008
  • 본 논문에서는 유한체 GF($2^m$)상의 다항식 기저를 이용한 디지트 시리얼 시스톨릭 곱셈기를 제안한다. 제안된 곱셈기는 MSD(Most Significant Digit) 우선 곱셈 알고리즘에 기반하며, 연속적인 입력 데이터에 대해 "m/D" 클럭 사이클마다 곱셈 결과를 출력한다. 여기서 D는 선택된 디지트 크기이다. 기존에 제안된 구조들은 선형의존성 때문에 디지트 크기 D가 증가하면 최대 처리기 지연시간 역시 선형으로 증가하지만 제안된 곱셈기는 이진트리 형태의 내부 구조를 가지기 때문에 D에 대해 로그단위로 증가한다. 따라서 제안된 구조는 기존에 제안된 디지트 시리얼 시스톨릭 곱셈기에 비해 계산지연시간을 상당히 감소시킨다. 뿐만 아니라 제안된 곱셈기는 높은 규칙성, 모듈성, 단방향 신호 흐름의 특성을 가지기 때문에 VLSI 구현에 매우 적합하다.